Lines not showing as blue when selected?
Hi, In my Toolbox my lines aren't showing as the standard blue so it makes it difficult to see what lines are selected. Selectioneffect = 1 & Hardware Acceleration in the graphics config is on and it is still not working so it seems like a Toolbox issue.Hingeplates
Does anyone know how I can change my default hingeplates on MV? It doesn't seem to appear in the globals or in the material hardware Spec Group. It is seeting all of our default hingeplates incorrectly.Nosing Filler thickness not subtracting from gables and no crown nosing filler option on upper cabinets
Hi, I'm working on a project where we area only using nosing fillers on all of our cabinets, when I select the nosing fillers within the product it is not subtracting the nosing filler thickness from the gables so I'm having to manually do so. I was wonderingAdding Sink To 3D Countertop
I would like to add a sink, or even just a sink cutout, into my countertop so that my 3D views will accurately reflect what my client is wanting. How can I do this? Thank you!TURN OFF ALL DIMS FOR 2D PLAN, SECTIONS AND ELEV
IS THERE A WAY TO GLOBALLY TURN OFF ALL DIMS AND NOTES FOR 2D PLAN, SECTIONS AND ELEV?Estimating Module
Can "Formula Driven Materials" be used for estimating a project? ALSO: In the Project & Estimating video session I did not find info on "the ability to limit access to specific areas of TOOLBOX". Did I miss it while viewing all the videos??Adding Custom Door Profile
How can I add a custom door/drawer profile to a project? The designer changed the profile from a standard shaker style to the one I'm going to attach to this post. Can anyone help me make this? Thank you!Viewport Scaling
Does anyone else have this issue? I draw in 1:20mm scale and use Annotative Dimensions and Text. When drafting in paper space I change the viewport scale to 1:25 and the dimensions and Text overlap and screw up. Is there a setting I am missing? I haveHow to Call a Value Without Looping It
I have a public formula I made which requires values that comes from my prompts. I have left_count = 1 middle_count = 0 right_count = 1 I need these values to come in as 1,0,1 which works if I plug that in to test it. When I plug in the actual variablesReport Designer Data
Does anyone know of a way that I can make a formula that analyzes all the data in a loop ahead of time and compiles the loop into one string like : Carcase Left Drawer Box Right Drawer Box Adj Shelf, that way I can analyze the entire string for amountElevation has a random white square...
Like the title says the elevation for a new product I've created has a random white square that i can't find the source for. There is also the width measurement that is obviously not taking my set offsets and i cannot find the source either. I've includedCreating a Formula Field
Where can I find the formula field section in the Report Designer?Can't Work On Any Reports
Every time I click 'Designer' tab after I open a report, nothing happens and my report goes away. Anyone know how to fix this I restarted my computer twice:PRIMARY filegroup is full
Hey everyone, May I ask if anybody has an idea regarding this error that pops up when I'm trying to drop a project from the library? It says, "Create disk space by deleting unneeded files," but we have a lot of free space on our Disk. Any advice willDimension leader line help
I can't figure this out, see image below. When drawing sections the dimension leader on the right (Circled Green) is about 2 3/4" longer than the leader on the left (Circled Red). It's the same whether you draw the section from the left or right, it'sWarning dialog about MV template text styles, dim styles and layers missing
I use keyboard aliases (the "acad.pgp" file) a lot. For the longest time, I have had "D" assigned to the Distance command, but now I get a pop-up message saying: This drawing does not contain the needed text and dimension styles or layers. They will beLegrabox N Height 500 Runner Length not appearing
Why the hardware sides is not appearing on this size of runners Legrabox? N Height Runner Side LegraboxChange Layer Color Of Cabinet
The layer of my cabinet changed for some reason and I'd like to change it back. Before: After:2D not matching 3d cabinets
HI All, I am having an issue when I make a section of a base cabinet it will not hold the cabinet off the wall 1/4" even though it is setup in the prompts to hold the cabinet off the wall 1/4". The 3d model is working just fine and holding off the wallMVSUBASSEMBLYPROMPTS command not showing the exact subassemblies
Hi everyone, I just want to ask for help regarding on our MVSUBASSEMBLYPROMPTS that's not functioning just like our other computer with the same Microvellum Toolbox. When we're trying to check the products subassemblies via MVSUBASSEMBLYPROMPTS, It showserror "the selected solids are not affiliated with any products in this builder session"
Why does this keep happening? Almost all the time all my parts do this, and I have to start over because I can't use any of the solid modeling tools on my pieces. Thes are added through the extruded parts menu and layers are added to them. After doingViewports keep resizing
When working with 2viewports they keep resizing to regular size after I do a command. This is really annoying as I have the right view port smaller than my main view port and I am getting sick of resizing every time I do a command. This is with the solidAfter purging 3D products now coming in on white layers
Is there a way to reinstall the layers. I have purged with no products in the drawing and now when placing products they all come in white in color.Foundation 25.0124 Door Center Panel
What is causing the center panel to not be visible? It shows up in 24.11272D sections are not holding cabinet off the wall even with the wall offset setup in prompts
HI All, I am having an issue when I make a section of a base cabinet it will not hold the cabinet off the wall 1/4" even though it is setup in the prompts to hold the cabinet off the wall 1/4". The 3d model is working just fine and holding off the wall3D Objects Are Plotting In Color
Hello, I'm having an issue where my 3D views are plotting in color, instead of black and white. My ctb file has all indexed colors set to black so I'm not sure what the issue is. I just started to add perspective views to my drawings today, so I'm notLooking for entry door library
Hello I am looking for entry doors pack.Subassembly Save Location
Where do I find the subassemblies that I saved to the library? I'd like to go in and delete one so I can reuse the name.2D Drawing for Applied Moulding
We created our cabinet doors in Library Specification Groups D! Workbook. Now when calling for 2D Elevation drawings the Applied Moulding doesn't show. Do we need to add 2D tokens for this? I tried adding DRAW2DBOX but this doesn't even give the miters.No machining for drawer adjusters
I have recently converted to the foundation library. The first project I drew has a bunch of drawer cabinets, and we use drawer adjusters. I believe I have set all of the appropriate prompts in the library for the drawer adjusters, but I don't get anyRemove additional lines from elevation?
I need to remove the lines that are coming out in the elevation for the ada unit. The prompts for a toe kick are turned off but in the elevation its still showing the toe kick.Changing the FE text location and removing right side FE dimension?
I looked but am a little lost on setting this up. I would like to move the right side FE text location to match the left FE location. I would also like to have the dimension come in on the left side finished end. I dont want a FE dimension on the right,Control colors of drawer boxes and other subassemblies outside of drawing tokens
Hi all, My company likes to have shop drawings differentiate between cases and subassemblies with different colors. Think items that go in after a case is assembled like adjustable shelves, drawers, kick faces, etc. Blue is for the casework and greenHow to adjust product number size?
I am not using annotative dimensioning and y product number looks like this whether I am in 1/2" or 1 1/2" scale. It does not change when I redraw the product.Grooved Panel Not Grooving Full Width
As per the title, i'm trying to setup this grooved panel, but it wont groove the whole width of the panel, its almost like its hard set to cut out at a certain number of machining operations and doesn't finish it. Anyone seen this?SMT EXTRUSIONS
Is there a rational reason why every extrusion comes in between a 64th & 32nd over the length of the construction line. Even at a butt I do not see the answer here3D Rotate Not Showing Preview
Any one else using 2025 not getting the preview when using 3D Rotate? Currently just get thisAdding vaulted ceiling to walls [issues]
I am adding vaulted ceilings to walls. I am selecting the proper measurements and the direction of the vault is the wrong way. The opposite wall is correct and using the exact same dimenions. This is probably due to drawing the walls left to right. WhenAngled cabinets
Hoping to nudge development for face frame angled cabinets. The non face frame library does a good start, a lot more options in there than face frame. But that just means i have to use a hash up of both cabinet types and force them to look remotely correct.MVPARTSLIST
Is there a way to customize what information is listed using this command? I'm currently using it for toekicks, but I'd like to eliminate information like the width as well as reduce the amount of spaces in-between the part name and it's correspondingNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: