Product Specification Group
Is there a way to pull the product specification group into the L! table? I am looking to use this information to display on the drawings but am unsure how to reference it.Cloud SQL Server
Can anyone advise on route to go for creating a cloud based SQL? We have floating licenses in our design studio and working of a stationary SQL Server, but I would like to have a cloud based SQL so that we can access our MV projects from the factory asScribe filler with cleats and toe kick improvements
@Lenny Scianna Please update the "scribe filler with cleats" subassemblies & Toe kick parts with the following improvements. Scribe filler with cleats Add Global "Filler to floor" Link existing subassembly "Filler to floor" to new global AddRotating nested parts, missing functions
I was looking into rotating nested parts, and found a video on this site. But I noticed that the guy from microvellum doing the video had this button that I don't have. Don't know if I have a different version of MV or could add this button somewhereFEATURE REQUEST - BLUM Servo-Drive Catalogue
Would be great to have the full Blum Servo-Drive catalogue in the library for drawers as well as the Uno for Bins/Dishwasher/Fridges1025 E.D.D. Issue
Is anyone experiencing an issue with accessing 2D instructions through E.D.D.Dear Santa
Dear Santa Please bring me an Optimizer that can nest complex shapes with minimum scrap or user intervention. I've been good all year and re nested thousands of parts with little complaint but don't you think that maybe you could goose the elves alongBanding Codes On Part Labels
I am looking for some help on part labels. We occasionally have parts which require different banding on parallel edges and am trying to find out if EBW1, EBW2, EBL1, & EBL2 are always located in the same position on the label. This hasn't been broughtMulti-pass Tools Doing Onion Skin First
Hi All, We've run into an issue a couple times now where our multi-pass tools are leaving an onion skin on the first pass on a face 5 panel, then the second pass plunges the remaining of the material thickness. It does not do this on every job so we'rePart Labels
Does anyone know what the circle in the corner of the Part represents??Moving Drawing Properties from older Drawings to newer Drawings?
What is the process of creating a new room in the project that will bring in Drawing Properties from a older drawing?Main TAB Defined Name Order
I have changed the order in both Advanced Library and Advanced Project Setup for how I would like defined Names to be listed They Are listed properly in User Preferences They still do not list accordingly in the Main TAB of Product Prompts Where do IBlind Corner Cabinet Spacer
In case where the blind corner cabinet may be a different depth that the Rest or adjacent cabinets. The location of the Spacer/Filler is driven from the depth of the cabinet. So, if you change the depth of the corner cabinet it will move the spacer locationMV FACTORY ALMOST FULL
Good morning, I keep getting an alert about MV factory being more than 90% filled. I went to Database Management and I am unsure about exporting files to selected target. Will the files be archived and reachable or will they be gone foreveeeerrrr??Ability to View Drawing While in Edit Additional Prompts
I think it would be a superb idea to have the ability to pan/view a drawing while also having the Edit Additional Prompts window open. I like using EAP/Edit Multiple Product Prompts to at-a-glance review whole rooms, but it would have so much more functionalityMV Profile Door - Cut Parts - Aluminum (wood) Handle - DRAW2DBOX HWR
Why is there still a DRAW2DBOX HWR in the Cut Parts tab 2D Elv Token column? This draws a 2D Box which does not match the aluminum (wood) handle height. There should be a draw token in the Prompts tab 2D Elv View Instruction instead. Will Dev pleaseCan I restore/add cabinets to my library from a library designer file
So I have a library designer file with categories and products that were lost in a server crash. Is there a way to add them to the library from library designer? I can only commit new changes and trying to import through database management doesn't work.Different size Number Window
Hi, Can someone please help with this, When I click on the cabinet number it comes up with multiple sizes is there any way to fix this? Thanks TracyCloud Based software
With Innergy now implementing design into its ERP and being completely cloud based, I wonder if Microvellum will ever have an SQL alternative allowing more remote work. I hate speculation so let's be clear here. Innergy is probably years away from beingview base hatch
Hey guys is thier a way to set hatches to layers for viewbase for example i want my walls to be a different hatch style to cabinets based on layer name?Micromanager Background Images
Is there a way to change to background images in Micromanager? ThanksFatal Error - MV not openning
Hi! i have a problem with my Microvellum. I can't not open the logiciel on my computer. I have a error...I don't know how to deal with it. Do you have a idea ?Product Image Sizing
We have a bunch of unique products and I would like to start images to them when you pick that product. However, I noticed my images may just be a tad high in quality and it has that slight "lag" when you click it, however the default products don't reallyCabinet With Curves
Hi, I am trying to achieve a cabinet with curved top, we are wanting to try and have the program run and create its own kerf core with the plywood we are using. I attached photos of the cabinet that I am trying to make. Any pointers would be great. IHow do you add simple "kerf cuts" to the face of the door?
I know this is possibly I saw this in the Foundation Library video. Can't seem to find the option.MV Doors
I have MDF doors pretty well developed in CCL, squaring out corners etc. I haven't done a lot of checking as of yet but the Foundation Library does not seem to have this as developed or am I not looking in the right place. It appears to me as though iRadius Corners on Routed HDF Doors
In Microvellum, there is a spot where you can change the Corner Radius on a routed door. Does anyone know where I can find it?Dowel Plancment
Hi Guys, Can you please help me about the dowel placement, I am using MV Foundation library 24.0919. Dowel Placement Dowels holes: 16 mm deep, 8 mm diameter Doweling is 32 mm apart or multiples of 32 mm.. Dowel spacing: 2 in front and 2 in back, thenCustom column values in Product List (used for Export Grid)
In the Product List, is there a way to set custom columns with formula driven results? We're using the right-click --> "Export Grid" feature to generate a report of sorts. The "Height" column turns out to be misleading for our QC/shipping crew, as itFEATURE REQUEST: Mass Auto-Draw of All Products in a Project
MV Server has helped immensely with automating the production side of MV for us, allowing for no-touch Work Order Creation & Processing. We'd love the ability to do something similar with the drawing of all the products inside a project. Currently, weGetting Room Name into as Product Prompt - MVLink
Does anyone know if it's possible to automatically pull the room name as a product level prompt? We're using MV Link to import our Microvellum products into ShopPak, but it only supports adding the location for each individual product from the productADA Sink Frame Side Machine Token
Problem, Does anyone have an idea on how to fix the machine token that does the ADA sink side panel cut for the right side machining? Currently if you do a finished right side and an unfinished left side the machine token does not cut through the materialMicrovellum work on Mac Parrallel?
Hi Members If i buy Macbook pro. and use Parallel. does it work on their? any issue? thank you.How to change top drawer opening height?
Where would I go about changing top drawer opening height of a base faceframe. Want it to be 5 1/4 default, and 5 11/16 if a different construction type. I think the setting is in the W, but don't know if I should change it there and I don't think I canAnyone here NOT using formulas to alter cabinets?
I mean like using the 2D Part Editor to put in simple drilling or even to do all custom machining...Anyone else get the "You cant right click and place a cabinet" bug?
Every now and then, sometimes several times a day I get a problem where I cannot right click on the interface to place a cabinet. Has anyone else seen this issue? Does anyone know how to resolve it? The only way I can fix it is if I clear my Temp Folder,"Creating Cross Sections for Hardware
I followed the video by RJ. Once I created the section view for a drawer slide, it shows up only for the top drawer. What are the steps to add the slide to all drawers?Removable panel
Does anyone know of a way to easily create a removable panel with Keku clips? Its been a pain to just figure out the hole location and do it that way.Face Frame Report & Angled Cabinets
Hi, I'm looking into this report and noticing that Angled Cabinets or face frames (Angled Face Frame, Diagonal Angled Face Frame, and Face Frame Open Corner) subassemblies dont appear on the Report. (See attached, might be easier to read). Any insightProduct Warning Message - When creating Work Order
I am getting a "Product Warning Message" when creating a new work order. But it doesn't create a log file or specify what the errors are. I have narrowed it down to Upper Cabinets with Face frames. But as I review the parts being used, I don't see anyNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Design & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnHappening This Week: Microvellum Focus Group & Release Review
We’ve got two product events happening this week and would love to see you there. Q2 Customer Focus Group - March 3 at 1:30 PM PST This is your chance to share feedback and help influence what we’re working on next. - Register February Release ReviewNew Toolbox Release Available Today: Build 25.1.0826.641
We are happy to announce that Toolbox build 25.1.0826.641 is now available! This build includes resolutions for issues with perfect graining and part placement, as well as various issues surrounding database usage, such as data association, copied productThe Foundation Library – A Unified Library Data Structure for All
For the last year or so, we have been working hard to develop a new library data structure to replace the cabinet libraries used by clients in various regions of the world. The vision of this initiative was to create a unified dataset that would enableToolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox and
Follow us on: