Straight Line Routing Machine Token with a Ramp
Hi Guys, Can you put a ramp on a Straight Line Routing Machine Token? I put the tool Number as 101Ramp, but it doesn't seam it is doing the ramp. I could use Pline but the formula just gets a bit more complicated when i have to do 80 of those machineSpeed of MV
Hi I'm new on here and to MV, so please do forgive my ignorance. Can anyone explain to me why one day MV runs super smooth and at great speeds, but the next day I struggle just to open it up. It crashes and takes hrs to do estimate reports. Any helpMicrovellum/ Chat GPT
Hey Microvellum people! Have you all discussed your strategy with how to marry MV with ChatGPT? I haven't been on this thread in a while, we're still using/loving MV; still haven't scratched the surface of its capabilities and still don't feel like we'veMV Follow Up & Flags on Feature Requests
I would love to see more official MV follow up and flags ("Under Review", "Maybe Later", "Implemented", etc.) placed on the most-voted feature requests on this forum. As is, many that have been on here for several months or more remain un-marked, so itNew Toolbox Release Available Today! | Build 23.1.0329.641
We are happy to announce that the update to build 23.1.0329.641 is now available! The latest release of Toolbox includes resolutions for issues with Materials, Part File Names and SQL Databases. Please refer to the complete Release Notes for more informationAdj Shelf Pin Slots
It would be great to have a Tick box option in Product Prompts -> 'Internal Options"' to add parametric slots for shelf pins to fit into. With the ability to adjust for the different sizes of shelf pins. Thank youToolBox 2023 ShutDown without warning
While working in a job, toolbox 2023 ShutDown without any warning or message boxBorder Routing Pass thickness of material
Hi There, Wondering how to set it up so the nested boarders have the machining go a bit over thickness of the material. Right now, if the material is .75" thick, the boarder will be cut at just .75" deep. I'd like the bit to go a bit deeper e.g. .752".2-Step Routing on small parts
Is there a way to setup 2-step routing on parts that fall under a specific length or width parameter?Project Properties
I'm editing my title blocks and noticed that if I add myself as the draftsman, even if I have the employee name as all caps it will still put it in lower case lettering on my title block. Is there a way to make it all CAPS? What's the best way to transfer"Graphics Folder" Adding Blocks for 2D Sections
Not to sure of where to store the blocks I want to use, for 2D Sections.Small dimensions in nest/composite drawing
Hi All, How do you set up / change / make default / large dimensions for use when in the nest/composite drawing?total part quantity on work order summary
I cannot figure out how to include a total part quantity for all manufactured parts on the work order summary report. If possible, i'd like to total parts by material, and possibly by processing station as well. Does anyone know how to do this?MV Sections
Out of curiosity, when I cut a section, is there any way that I could edit the microvellum cutting plane? Or, do I need to use acad erase and recut to section?One or multiple databases?
I am trying to get myself set up for next week, and I want to create a sandbox. My question is, would the sandbox be its own separate database or would it be mingled with all of my other data? https://community.microvellum.com/portal/en/kb/articles/Artificial Intelligence and Microvellum
Has anyone dabbled with Excel Copilot AI to help with writing complex formula in MV? Has it expedited workflow? I've also heard of people using various AI to speed up AutoLISP code writing. Has anyone used it successfully?How Are You Using ChatGPT for Excel Formulas and String Manipulation in Microvellum?
Hey there, Microvellum community! Let's talk about ChatGPT and Excel. Yes, you heard that right. We're bringing the AI language model into our world of cabinets and shop fittings. But here's the thing, ChatGPT can actually be pretty useful when it comesProduct prompts being overridden
Hello again, I have this problem that is driving me slightly crazy. When changing product variable from the Product Prompts screen, certain values get overridden (from a formula to a hard coded value). I think this has something to do with the product3D Connexion Macros
I recently purchased a cad mouse. Has anyone figured out how to optimize the macros? If so, would you please post how you have your steps and text formatted? To the masses: Do you use command strings that are formatted in tool pallets and the CUI coSwitching to Foundation Library
For anyone who has made the switch to the Foundation Library, can you tell me how your experience was? Was it an easy transition? Was it a long process? I'm just curious about what to expect if we decide to swtich over. Thank you so much!"Library Development and Maintenance"
I have heard this term used in a few Videos and would like a better understanding of its meaning and responsibilities, as they relate to the use of MV.Cut parts wizard disappeared
Hello i was working on specification group but cut parts wizard disappeared. How could i fix it?How do I include door and drawer sizes in my Work Order report?
Hi everyone, is there a quick and easy way to include door and drawer sizes in a Work Order report? I've been trying to do it but I need help. Much appreciated if anyone could guide me through it. Thanks.. CTSUGGESTION: Recently Used Products List
Maintain a list of the say...10-15 most recently used products. Since i would imagine MOST of us use the same handful of products 90% of the time, this would save so much clicking through sub menus.Wall associations
I would like to know how would I safely remove a cabinet association from a wall. My recent workflow has changed from placing cabinets on a wall to populating an elevation, and I would like to convert current projects to such.2D Sections with no Construction Holes
I want to remove the construction holes from my 2d Cross Sections and still keep the 3d Full Machining.Product/Item Number Scaling Issue
I'm having an issue with the scaling of my product/item number. When I was putting in a cabinet I was getting a ton of different scales for my dimensions and product/item numbers *see attached* and it was a long process to go and manually change the scaleUnderstanding MV Template Layers; FOUNDATION
I have noticed in time that the layers list has grown. In the attached file I have expressed some questions, to help me better understand their purpose. I understand the purpose of "Layer Management" and would appreciate some input.Hardware Association Error
I have started a new project which is actually copied from a previous project. When I started drawing cabinets the cabinet pulls are on a layer 3D_HWRAssociationError and not in the correct location. I have attached a picture to illustrate. The job IMachining
Hi, I just wanted to find out if anyone else is having problems with Blum Legrabox bottoms pocket cut outs, and what you may have done to work around the problem. The machining pattern has been changed for a pocket cut out in the new foundation library,Drawer slide length drop down selection - inch or mm?
Foundation library - is there a way to change the length descriptions in the drop down selection for slides so that they display in their respective lengths as sold by manufacturers? Currently when we select a slide that is sold in mm increments, theyReference Subassemblies
How do I reference a specific subassembly in the local product and even inside of a subassembly? Example: I have a subassembly called "Shelves", it has Qty, height, etc and origin information. I want to the prompts in the local to look at "depth" of theThe MiLL National Training Center
For everyone looking for skilled workers but not sure where to look, check out this Limelight on The MiLL National Training Center in Colorado Springs, CO. If your local school district has a CTE program in place, reach out to them to see how you canFEATURE REQUEST: Update the command line help text for “Associate Products to Wall”.
When using the Associate Products to Wall the initial prompts simply says, “Select objects:”. This would help in training new users while also being more accurate and specific in the command. It would be helpful and correct if the prompt was “Select wallIs anyone using a Stream Deck in their workflow?
I just came across the Elgato Stream Deck. It's an LCD control panel that lets you automate commands. I've seen where autocad commands have been programmed to help increase drawing speed. Is anyone using one? Do you like it?New Toolbox Release Available Today! | Build 23.1.0313.641
We are happy to announce that the update to build 23.1.0313.641 is now available! The latest release of Toolbox includes resolutions for issues with label images, subassemblies, the processing center and hardware machine tokens . Please refer to the completeFEATURE REQUEST: Move “Product Drawing Setups” to Global controlled prompts.
The “Product Drawing Setups” are created and controlled on a per computer basis, allowing each user to make their own setup and changes based on their desired look. For a company that wants to create and control the basic standards of our drawings so"Reverse Engineer"
I remember watching another of James's EXCELLENT video's. Forgot the name of it. I believe I will find the answer to my question: how to find the workbook in the drivers seat for being able to have my section dims reflect starting at the "Wall Thickness".3d space mouse
I have just purchased a 3Dconnexion Enterprise space mouse to use, and so far I am liking it. But I have a problem with the view buttons do not work. I just wanted to see if any one uses one and if they have ever had a problem with using it with MicrovellumIndex -out of range -Toolbox 2023_Foundation Library
Hello, I'm getting this error message. Hoping someone can explain the cause. Thanks in Advance.Next Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
The Foundation Library – A Unified Library Data Structure for All
For the last year or so, we have been working hard to develop a new library data structure to replace the cabinet libraries used by clients in various regions of the world. The vision of this initiative was to create a unified dataset that would enableToolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox andNew Foundation Library Release Available Now: Build 23.1010
We are happy to announce that a new update for the Foundation Library, Build 23.1010 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, including fixes for multiple subassemblies and promptsNew Foundation Library Release Available Now: Build 23.0517
We are happy to announce that a new update for the Foundation Library, Build 23.0517 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, including the imperial/metric conversion for closetNew Toolbox Release Available Today! | Build 23.1.0222.641
We are happy to announce that the update to build 23.1.0222.641 is now available! The latest release of Toolbox includes resolutions for issues with Machine Tokens, Materials, and the Database Management Tool. Please refer to the complete Release Notes
Follow us on: