FEATURE REQUEST: Defined Ranges for Spreadsheet Columns
It would be great if the other columns in the spreadsheets (CutParts, Hardware, Subassemblies) were defined ranges - similar to the defined ranges for Panel_Width, Panel_Length, Panel_Qty. This would be helpful too for all the hidden columns (A thru P),Dimensions on Report Images
I am trying to revamp our product detail reports and I am having trouble finding where to control the dimension text appearance. I can change the dimension style and text style, but I can't figure out how to make the text darker so it's visible. DoesBricscad Transition
We are beginning the process of transitioning to BSB. We are currently on Toolbox OEM 24.1.104.641 Wondering if its ok/good idea to work on projects interchangeably between the current toolbox BSB and our current Toolbox oem Can we just install it sidePolling to session server failed
While using MV occasionally I get a pop up indicating I've been offline for a while! then I get one indicating 'polling to network session server failed - no error' both screenshots attached MV say its our server our IT people say its not! Working remotelyFeature Request: Relative coordinates in vector formula
Would be handy to be able to use relative coordinates in a PLINE VECTOR formula. In the example below, the # symbol denotes the previous coordinate in the corresponding plane (X). =VECTORS(PNT(Panel_Length/2,10,Thickness_Door),PNT(#+100,10,Thickness_Door))Feature Request: Integrate Underpanel as Subassembly within Upper Cabinet Product
Hi everyone, There is currently an underpanel product available in the library, and we use it on nearly every job. However, it must be manually inserted and positioned each time. Given how commonly underpanels are used in upper cabinetry, it would beToggle Button for leaving Paste Name window open
I really enjoy doing my prompts/programming through the Part Properties window. Just easier for me to see what each entry prompt versus looking at cells. One thing that gets tedious is constantly having to open the Paste Name window after a single selection.this "replace product prompts"....is that like "replace product"??
or does it just replace the product prompts?Base or Tall Cabinet - With Toe Kick and Adding SCRIBE at Floor
Ok ... Why is this so hard to do in FOUNDATION LIBRARY? (Maybe it happened in COMPONENT LIBRARY too??) Base or Tall Cabinet ... Cabinets for a big project are going in BEFORE flooring ... so customer whats all the BASE and TALL cabinet to have 7/16" extraEditing Descriptions in Parts File
How do you edit the descriptions that print in the Parts Drawing after running a work order. We are wanting to add the Edge Band information to the list that prints with the Parts Drawing, similar to how are DXFs print, but are unsure where to go to changeHow to add a Multi-Pass to our VCUT Bit
Looks like our CNC operator is telling me we need to have this be setup as a 2 pass operation whenever want to use this bit. I dont know how to either set up the route token to pass twice/setup 2 routes tokens that drop down as needed. Or just easierActive MV User
Is there a way to reference the logged in user on a report? where is this data? ex. including engineered by: [currently logged in user] on nest report EmpoloyeeLogin table would seem to be the logical place but no luckAdd More Star Hanger Hardware
We like to use the Star Hanger 320's for many things as well as others that aren't included in the libraries currently. We would like to see more Star Hanger products added.New Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseCopy and Paste in Edit Design Data - Please Fix this issue.
How many times have you pasted a formula into Edit Design Data and select Save, Close and Redraw? Guess what, it doesn't save it and now you have to do it all over. For some reason EDD doesn't recognize this change, so you have to "trick" MV into thinkingWiki
More of a general question: This detailing job has more info than I can keep in my head, Especially info used like once a year, Ended up making a folder for every supplier/company to contain their specific info, (150 suppliers), Then have a word documentSolid wood doors
It has been a while since I've had to change the doors to solid wood slab doors. Since there are so many ways to do it in MV, what is the best method? Change the door material pointer to solid wood material or change the door style to something? LookingMicrovellumWorkOrder & MicrovellumGeometry
Installing a foundation library on SQL Server to run beside our component library until we can transition. Assuming i can just create the “MicrovellumWorkOrder” & “MicrovellumGeometry.” databases but name them differently for the new version. Leave theOverlay top and Rails both selected
I wanted to have top rails that are overlay but was told that isn't possible. However both are now selected and i don't know how to unselect them. I went to the spec group but can't select it there. Any thoughtsTwo different size screws used in construction is it possible?
We currently are using screws and dowels for construction. Conformat screws (7mm) used for construction of top/bottoms and ends. We want to use a smaller screw (3/16") to attach the back to the sides. Is there a way to specify two different sizes forBase_Door VS Base_MDF_Door
Can someone explain the difference between these two? Base_ door and Base_MDF_Door. Is the Base_MDF_Door, one that gets routed out to look like a 5 piece door?Composite file shows all parts under one product
Work Order shows correct product numbers. Reports show the product number. The composite file shows all parts are under Product 1.00.Need Hardware
Accuride 3634/3634EC Accuride 7950/7957 Rakks surface mount brackets Does anybody have these they would be willing to export to me?Foundation Library Drawer Boxes - Material Selection
In the Foundation Library I am curious how others have it setup in their formula driven materials to be able to select between drawer box materials. As 95% of out projects utilize melamine drawer boxes, but occasionally we get a project that wants hardwoodHardware List
If I wanted to print a hardware report of all of our hardware in the current library, is there a way to do that? Specifically talking about all of our hinges so we can just look at the report to see if the hardware numbers are correct?Q: How are feature requests prioritised?
Just a question around how feature requests are actually prioritised now. Is it mostly based on likes and engagement, or is production impact weighed separately? I ask because writing a proper forum post takes a fair bit more time than submitting a ticketleft/right drawer fronts still not labeled
so i saw that on build 25.0319 they added left/right part names to drawer parts on a side by side draw config. but we are on 25.1121 but are drawer fronts still aren't labeled left and right. is there a prompt i'm missing?V-grooves on MDF slab door
Any idea on how to add vertical v-grooves to MDF slab doors?Better resource for editing visibility in a block in BricsCAD
Does anybody have better documentation on how do actually do this? AutoCAD was so much more intuitive.BricsCAD Subscription
Hi Fellow MV users, Since BSB now includes all features. We are thinking to convert to BricsCAD and want to gauge what everyone is paying for Subscription with 1 license.Master 2 Bay Horizontal
I haven't made use of MV for the last 2+ months, and you know what happens (If you don't use it you loose it). I need to modify the unit, not sure how to accomplish this in E.D.D., 2D Instructions or Subassemblies. I cannibalized the original and justSlat Wall
Wondering if there is a Slat Wall product in Foundation, I searched and found "perforated panel". The Wall Paneling is not helpful. Any suggestions?dfd-bold.shx
In BricsCAD, I have this 1 font I can't for the life of me figure out where to import from. Does anybody have a file of this they can share with me? It pops up every time I open a drawing. Previously we used OEM so wondering if that has something to doToolbox BSB Crashing
I keep having issues with the program crashing. Even changing views (top to right) it gets real buggy. Its now to the point where I can not place a wall in a room and it crashes. Any recommendations would help! Things I've tried: -I have reverted backWMF part Images
I'm using the bluecell saw postprocessing station. and have WMF. images turned on I cant however seem to get the program to produce wmf images for parts without horizontal boring or some sort of machining? How can i get a image for every part. The reasonSMA material selection?
When SMA prompts for a material selection, if I used find and replace inside our typical library materials, it only lists 1 set of the find and replace that I did. I am assuming it is the 1st material names I changed or 1st spec group its using, howeverNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofUPDATE ... USER ERROR DUH! - Can you NOT add a Material Pointer at the Project Level anymore in Foundation???
Ok ... Can you NOT add a Material Pointer at the Project Level anymore in Foundation??? Not there... Can't manually type in it either ... What's up with this???? Not here eitherBricsCAD Sheet Set Manager
Does anyone know how to rename a subset? I find help online saying there should be a "rename subset" in my right click options, but it is not there (or I'm not looking hard enough). I need standard subsets to organize drawings (Plan, Elevation, Detail,How do I delete scales I don't want in BSB?
The delete button is grayed out for all of them.Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 25.2.0406.641
We are happy to announce that Microvellum build 25.2.0406.641 is now available! This build includes resolutions for issues with the Product Prompts UI, the Part Properties interface, formula driven materials, and more. Please refer to the complete ReleaseNew Microvellum Foundation Library Release Available Today: Build 26.0327
We are happy to announce that a new update for the Foundation Library, Build 26.0327 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Today: Build 25.2.0330.641
We are happy to announce that Microvellum build 25.2.0330.641 is now available! This build includes resolutions for issues with editing formulas in Part Properties, perfect graining, toolfiles, errors occurring during processing, and various issues withinNew Microvellum Release Available Today: Build 25.2.0317.641
We are happy to announce that Microvellum build 25.2.0317.641 is now available! This build includes resolutions for numerous issues with Microvellum's optimizer, block nesting, the nesting tools, label creation, part machining, and more. The Product PromptsDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earn
Follow us on: