Dado in Shelf Edge
Good morning, I trying to make the Shelf Edge to have a dado and also to have a 1/8" Lip UP Below a picture of what I have and what I need, and also the globals that is currently set. And also, how do I change the Size from 1-1/2" to 1-3/8"? Thanks inFeature Request - Work Order Notes
It would be super handy to add a "Notes" line when creating a work order so that when we go back and look later on at the same job with say _2 or _3 etc we know what they are for. For instance, say i process an order with 12345_1 and 12345_2, i have noEPB/SMT/SMA and Associative Machining
Is there a procedure, in place, for adding additional machining to a “Vertical” for attaching a “In-Wall Support Bracket”. The only way, I know in accomplishing this, would be to draw a replacement profile and change out the studs to be used for the In-WallConventional vs. Climb Cutting and how to specify one router
I am having chipping on laminated surfaces when routing and machining doors on our CNC. To reduce the chipping we have learned that the doors needs to be cut in a conventional (Counter-Clockwise) direction. We do however want our primary perimeter routerImperial and Metric Toolbox Configurations
I currently am using an Imperial Toolbox configuration on a SQL Server. I would like to create a Metric Toolbox configuration. Can you have an Imperial Toolbox configuration and a Metric Toolbox configuration on the same SQL Server? If so, how do I distinguishNew Foundation Library Release Available Now: Build 23.0623
We are happy to announce that a new update for the Foundation Library, Build 23.0623 is now available! The latest release of Microvellum's Foundation Library includes the addition of numerous products, such as a hardware bracket for countertops, numerousSingle Doors and Single Drawer Fronts should be included with perfect graining
While working with a material with directional grain (cathedral grain), we discovered the "1 Drawer Base" drawer front did not nest with the same orientation as the adjacent products. My ticket to Microvellum informed me that "a minimum of a pair of partsNew Toolbox Release Available Today: Build 23.1.0621.641
We are happy to announce that Toolbox build 23.1.0621.641 is now available! This build includes several resolutions for issues like configuration errors, the removal of redundant options and buttons, along with multiple UI improvements. Please refer toIdentifying Drawer Parts with Bay Position - Best practices?
The problem - We occasional lower or raise a drawer box part in a cabinet with multiple drawers. Our CNC operator doesn't always know which drawer box gets the modified part. I plan to add the bay position name to help our operator identify which drawerI need help with finding the Carcass Base subassembly.
Where can I find the subassembly Carcass Base? This subassembly was available in Library v050.7 but not in Library 23.0609. See attached screenshots. Thank you for any input.Labeling
Has anyone had success creating a QR code that will give the information of the room# or the cabinet# and include that on a label that we create?Routing Laminated Doors Face Down
We are currently machining our doors on our CNC so that we can also include hinge and handle boring. We run one side laminate with a balanced backer, the laminate face is down. We are having the laminate chip out on us most of the time, but not every3MM EDGEBAND SETTING NOT GIVING APPROPRIATE GAP SIZE
I’m having much difficulty editing edgeband settings for an important project. I have searched the database, videos and googled. Wondering if you’re able to help? We have the specs set up for 3 mm edgebanding, but it is not allowing the product enoughFEATURE REQUEST: LISP Routines Please!
I know I’m asking for something that probably isn’t going to happen, but I thought I’d throw it out there anyway. I used to have a ton of LISP routines that helped us speed up our processes. Some were very simple, others more complex. But the need cameFace Frame Bevel and Miter on the Corners.
Hello, Is it possibel to Add bevel on the interior edge of the face frame? See picture If possible, how can I achieve that? ThanksValidation Code
I’m trying to use the validation code to restrict a value in this scenario: I have a prompt which has a formula and I want to validate the result based on the validation code column to show a warning message. If the user interacts with the prompt, itHow to get Project Name / Work Order Name into DXF file?
I'm trying to create DXF's that include the Project name for each part, and also the Work Order name. I'm currently creating them at time of work order creation, and they already include the other info that I need. How do I get the project name and workSMT "Extruded Parts"
I have checked rechecked and also redrawn the "Geometry" for my "extruded Parts". They constantly show up with an overlap of one section to the other by .02". What is causing this to happen? Much appreciation in advance.System Lockup When Work Order Directory Open
When reprocessing a work order and the work order folder is open (from viewing report groups), if you forget to close the window directory, the system will lock up and requires you to do Task Manager/End Task to close Toolbox - just as bad as a Fatal"Hinge Plate Inset Blum" for Inset Doors // V50.7
Hi, It seems that Microvellum only has one Global viable that reference the Hinge Plate inset from door (1.4567" = 37mm) . But per Blum's spec, the number is different (38mm) when it is an inset door. Shouldn't be there two Global Variables that willNested Optimization Report Index Number
Is there a way to change the nested optimization report index numbers to be sequential throughout every nested sheet instead of starting back at "1" ? We do not use labels on parts, instead we write a single number on the back edge of each part. Whereimporting library to SQL Server
I have always worked with a local instance of Microvellum so a few questions about MV in the server context to make sure i'm not assuming anything. *i can have multiple librarys/configurations? * its possible to import a library that i have a tweakedHard drive issue
Hello All I have a failing hard drive here at work and the IT company just asked me if MV when loaded onto a computer is then coded to that hard drive. As the last time it was cloned, MV would not work, and my hard drive is still failing. Cheers NigMolding Token
I'm trying to get an extruded part as a molding token but I'm having issues with part placement. See in GREEN the part without the Molding token, in the correct position. Then in RED when i add a Molding token, i did not change the position or base points,IF AND Statment
Hi, I'm trying to create and IF AND statement but I don't know how to word it properly for the formula to work. If I have the add substrate prompt checked then I want the product to add the substrate. Then further if the substrate is checked I want microvellumProduct Starter NOT Getting Associated Sub Assembly Machining?
.... couldn't figure out how and when this happens sometimes .... has anyone notice this? Ok ... I finally can reproduce the steps to make this happen. So hear me out. Product Starter Horz - (3) Bays - Drawer Bank, Door and Drawer Bank (Nothing fancy)Step cut code generation
Riddle me this. Yeah I know this is a little long but humor me please. Why when we need to make step cuts are we still generating code that has an index move fore each cut? Why is this? Here is a simple square with 4 steps and the MV generated code. 55Pricing preventing work order processing
Could someone inform me what to do to prevent this error?AutoCAD 2024
Replace block command looks interesting. Hoping this is available in MV OEM.Drawer Slide not showing in Section?
Does anyone know why my Axial Drawer Slides are not showing in Section? I tried everything including picking a cutting plane right below the slides, changing the cutting distance in X, nothing worked. Thanks,Improved Subassembly Prompts Selection Window
When using the Subassembly Prompts tool and then selecting a part of the desired subassembly we are greeted with a window asking if we want to view the nested prompts by clicking "Yes" or the parent prompts by clicking "No". Every single time I see thatPart Not Appearing on Nested Report
Hello, Recently I have been encountering a problem where parts won't appear on my nested report. The cutout of the part will just be a squiggly line, but any necessary machining stills appears as if it is there. I have attached a picture below. This isSMA Router qualifying diameter
How would I drill down to identify this problem?Shelf Pin Holes being drilled central to shelf
Does anyone know how to change the shelf pin settings so that the centre of the middle hole is in line with the bottom of the shelf? At the moment it is drilling it central with the shelf.Supplemental Parts
Is it possible to move a supplemental part into the extruded parts folder?Feature Request: Drill Location Hole for hinges
I would love to see Drill Location Hole for concealed hinges added to the foundation library.Adding New Fonts
Our marketing team wants us to use the special fonts they use. I added the fonts into windows fonts. but I can't get it to show up in Microvellum? Is there something special I need to do?foundation library cutpart files
getting started with the foundation library so please forgive elementary questions. Whats the differneces between: formula cutparts default --allows you to use cutparts wizard imperial cutparts default --old school imperial cut parts file imperial cutpartsSMT Custom Tools
I have a question regarding "procedure" please see attached. Much appreciation, in advance.Specialized Virtual MV University Event - SMT
It would be nice to have an event that the community would be able to attend that would teach them to nuances of the SMT. I am at a point where it is taking me more time to manually fix and alter my model than have it done for me with the tools that INext Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Microvellum Q&A Sessions
This post catalogs Microvellum's Q&A Drop-In Sessions from the year of 2023 to the present day. In Q&A sessions, Microvellum's team of experts help answer questions from clients regarding Toolbox, product engineering, software updates, troubleshooting,New Toolbox Release Available Today: Build 24.1.1105.641
We are happy to announce that Toolbox build 24.1.1105.641 is now available! This build includes resolutions for a fatal error that would sometimes occur during processing, as well as issues with the software feature warning clients when their databaseNew Toolbox Release Available Today: Build 24.1.1030.641
We are happy to announce that Toolbox build 24.1.1030.641 is now available! This build includes resolutions for issues with routing and door profiles, specific settings within data access, the setmill of extruded products, the Library Update Utility,New Foundation Library Release Available Today: Build 24.1025
We are happy to announce that a new update for the Foundation Library, build 24.1025 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, updates to existing products to improve functionality,Component Cabinet Library PDF Archive
As part of the End of Life for the Component Cabinet Library, the majority of articles on the Component Cabinet Library have been removed from the Microvellum Knowledge Network. However, we are fully aware that some users may still require the documentation
Follow us on: