Molding Token
I'm trying to get an extruded part as a molding token but I'm having issues with part placement. See in GREEN the part without the Molding token, in the correct position. Then in RED when i add a Molding token, i did not change the position or base points,IF AND Statment
Hi, I'm trying to create and IF AND statement but I don't know how to word it properly for the formula to work. If I have the add substrate prompt checked then I want the product to add the substrate. Then further if the substrate is checked I want microvellumProduct Starter NOT Getting Associated Sub Assembly Machining?
.... couldn't figure out how and when this happens sometimes .... has anyone notice this? Ok ... I finally can reproduce the steps to make this happen. So hear me out. Product Starter Horz - (3) Bays - Drawer Bank, Door and Drawer Bank (Nothing fancy)Step cut code generation
Riddle me this. Yeah I know this is a little long but humor me please. Why when we need to make step cuts are we still generating code that has an index move fore each cut? Why is this? Here is a simple square with 4 steps and the MV generated code. 55Pricing preventing work order processing
Could someone inform me what to do to prevent this error?AutoCAD 2024
Replace block command looks interesting. Hoping this is available in MV OEM.Drawer Slide not showing in Section?
Does anyone know why my Axial Drawer Slides are not showing in Section? I tried everything including picking a cutting plane right below the slides, changing the cutting distance in X, nothing worked. Thanks,Improved Subassembly Prompts Selection Window
When using the Subassembly Prompts tool and then selecting a part of the desired subassembly we are greeted with a window asking if we want to view the nested prompts by clicking "Yes" or the parent prompts by clicking "No". Every single time I see thatPart Not Appearing on Nested Report
Hello, Recently I have been encountering a problem where parts won't appear on my nested report. The cutout of the part will just be a squiggly line, but any necessary machining stills appears as if it is there. I have attached a picture below. This isSMA Router qualifying diameter
How would I drill down to identify this problem?Shelf Pin Holes being drilled central to shelf
Does anyone know how to change the shelf pin settings so that the centre of the middle hole is in line with the bottom of the shelf? At the moment it is drilling it central with the shelf.Supplemental Parts
Is it possible to move a supplemental part into the extruded parts folder?Feature Request: Drill Location Hole for hinges
I would love to see Drill Location Hole for concealed hinges added to the foundation library.Adding New Fonts
Our marketing team wants us to use the special fonts they use. I added the fonts into windows fonts. but I can't get it to show up in Microvellum? Is there something special I need to do?foundation library cutpart files
getting started with the foundation library so please forgive elementary questions. Whats the differneces between: formula cutparts default --allows you to use cutparts wizard imperial cutparts default --old school imperial cut parts file imperial cutpartsSMT Custom Tools
I have a question regarding "procedure" please see attached. Much appreciation, in advance.Specialized Virtual MV University Event - SMT
It would be nice to have an event that the community would be able to attend that would teach them to nuances of the SMT. I am at a point where it is taking me more time to manually fix and alter my model than have it done for me with the tools that ITool File Adjustment?
I would like to know the steps needed to remove the notched path that is cut in the DADO Wall. Is it tool related and or what ever else is causing the condition? I am new to this stage of engineering and I would like to make certain that this "trainingSmart Layers "String Information"
Is there documentation that explains what is initialed in the string. It would be nice to understandSink Sub Front on Door and Drawer Report - Can it be omitted?
Why do "SINK SUB FRONTS" show on the DOOR and DRAWER report? (See below) And can we remove it....unless there is a good reason why not too? Reason / problem is ... we have a BUYOUT report and a DOOR & DRAWER report. We ordered from the DOOR & DRAWER REPORTFEATURE REQUEST: Enhanced Sections
The Draw Sections tool is okay, but it could be better. It'd be nice to have an additional distance setting that would be used in more of a SECTIONPLANE/BOUNDARY type section. This would allow the user to create a cut in a section and only have the partsFEATURE REQUEST: Hardware Images in Material File Hardware Library
Something like the below image would be nice, to help keep our very large hardware library straight. It could reference a CAD dwg or require a separate JPEG to be stored, similar to the Product Images, Machine Token Images, etc. If these could be usedFEATURE REQUEST: Allow Smart Layers to be Assigned to Solids
When modeling things out that can't easily be build with the SMT builders I find it beneficial to still set up Smart Layers for part naming and material assignments. When modeling completely custom 3D solids it would be great to assign Smart Layers straightNew Foundation Library Release Available Now: Build 23.0609
We are happy to announce that a new update for the Foundation Library, Build 23.0609 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, such as corrections to global variable use in someAcad Subtract
When I use a large solid to subtract multiple parts, once I execute the operation, all of the parts are made as one, How could I do this and still have them as their own entity?F1 help document modification request
Would the be any chance that we could have an Autodesk hyperlink that could go straight to the help location for the appropriate AutoCAD install? Example: We are running 22, it would be nice to have the option to go straight to https://help.autodeskDifference between EQ and GETEQ
Hi So i created a sub for special shelves and had 2 option for it. One option was using the EQ1 and the other the EQ2 After a few conception trouble(the positioning started at the bottom of the cabinets), i realised that even while we use the pick corners,AutoCAD "UNHIDE" Command
I remember a discussion sometime back about adding AC commands to the MV Toolbar. I cant locate it nor did I book mark it. However, we have the "hideobject" command available and I don't see the "unhideobject". The more solids you add to a drawing theFEATURE REQUEST: Add a "Draw All Selected Products" in Product Viewer
Currently when you are drawing products in the library you can right click and choose "Draw all Products in Category" One thing that would be helpful would be to have this same option available in the Product viewer. Right now if I add multiple productsNew Toolbox Release Available Today: Build 23.1.0613.641
We are happy to announce that Toolbox build 23.1.0613.641 is now available! This build includes several resolutions for issues like edge band material overwrites, prompt duplications, and problems with certain machines during the nesting process. PleaseEditing multiple solids
Here is my dilemma, I have a desk with many solids and assemblies, and multiple walls. I need to make minor adjustments to lengthen the walls and move studs and dados with it. Is there a way to do a bulk edit for this to happen?Machine Collision Warning with Vertical Drilling
We're cutting a bunch of dowelled cabinet parts on 27.9mm material and keep getting machine collision warnings at the CNC (Morbidelli N100) which appear to be depth-related. I've narrowed it down to two vertical drill bits (5mm and 8mm) and can get theVirtual MV University
Did MV release the recording of there first virtual university to the attending companies?Issue when copying page tabs in OEM 2023
Why does it place the new page tabs after the layout I selected? It says "before layout" in the menu. I've gotten it to work correct at other times but I'm not sure if its the drawing that is messed up or if its because of a setting somebody else hadShelf stud holes
Why are these shelf stud holes not level, how do i fix this?Vertical Entities
Is there a way to lock vertical entities with the EPB?"Construction Line Path"
What would be the normal practice to change the dimension of one section from a two section "Path". I would appreciate how others handle this correction. Thanks in advance.Better Stability with AutoSave and Drawing Sections
Toolbox seems to crash on a pretty consistent basis, and based on the frequency in which the crashes occur it appears they might be linked with the timing for auto-saving the drawing. (I've tested this with several different auto-save times and it's verydbconnect
Why is it that I am not able to execute queries of databases once they are connected? Is this not an option in OEM?Formula Help // Refer to a Prompt from one Subassembly from another Subassembly
Hi There, library V50.7 This has bugged my for a while and has stopped me from doing many paramatric things I wanna do. How can I refer to a Prompt of one Subassembly from another Subassembly? I have a bottom panel with a grommet hole in subassembly "UpperNext Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Toolbox 2025 Now Available
We are happy to announce that Toolbox OEM 2025 is now available! To discover the new features and abilities of Toolbox 2025 check out What's New in Toolbox 2025 (OEM). For help installing Toolbox 2025 please visit Installing Toolbox for a simple overviewNew Toolbox Release Available Today: Build 25.1.0213.641
We are happy to announce that Toolbox build 25.1.0213.641 is now available! This build includes resolutions for issues with stay-down nesting, adding 3 new options to the nest settings to address them, as well as an improvement for Drawing Products inNew Toolbox Release Available Today: Build 25.1.0129.641
We are happy to announce that Toolbox build 25.1.0129.641 is now available! This build includes resolutions for a variety of issues with the Solid Model Analyzer, as well as a few additions to the analyzation settings. Please refer to the complete ReleaseBlum MERIVOBOX Drawer System Add-on Now Available for the Foundation Library
The new Blum MERIVOBOX Drawer System is now available for Microvellum’s Foundation Library. To obtain the new drawer, click here to download just the drawer system and use the Database Management tool to import. Otherwise, you can use the library update2024-2025 Product Engineering Updates
Here you will find a catalog of the Product Engineering Update Review recordings for 2024-2025. These hour-long meetings, hosted live at the end of every month, feature Microvellum's Product Engineering Team reviewing the latest changes and improvements
Follow us on: