Toolbox AC for AutoCAD 2026 ??
Any update on Toolbox AC officially supporting AutoCAD 2026?Build Request: Toolbox OEM 25.1.0616.641
Greetings Everyone! :) We were hoping to get our hands on the last build for Toolbox OEM since Bricscad BSB subscription has been launched. Since the autocad licence ended, MV is unable to provide this update as the deadline has passed.. Would someoneHardware Machining Holes
Is there a way to update / change the holes that are created by this drawer spacer? The hardware part is Blum Tandem Slide Spacer. I don't see any parameters to change the holes in the design data. I can't make any changes to the holes in "draw part in5 Piece door is showing gaps between rails and stiles
There is a gap between rails and stiles on a 5 piece door The tongue length measures at 0.5" (needs to be 0.375") . Which is causing the overall rail length to be 0.25" short In the "S" workbook, the tongue length is set to 0.375". If I change it to 0.5"Choice: Toolbox AC or Toolbox BSB
Hi Community, It's been 3 months since BSB launched, and I have put a lot of detailed feedback and done massive search regarding whether we can transition our team's heavy muscle drafting memory from AutoCAD to BricsCAD, and we are still struggling, asAbility For .mprx CNC Output
Adding ability to produce .mprx files in G-code to keep up with newer WoodWOP versions. Gives operators better variable support and data manipulation in components vs the .mpr output.Cross Section Wall
I would like to turn of the Cross Section Wall. However, turning off the 2D_Section Layer, will hide all Geometry. What "Prompt" controls the Layer for the Section Wall.New Microvellum on BricsCAD User - Challenges with AutoCAD-centric Training
Hello everyone, I'm a new user working with Microvellum on BricsCAD, and I'm finding the official training videos, particularly those in the "Plan to Production" playlist, challenging to follow. The videos are great, but they're demonstrated in an AutoCADDrill bit "Type Info"
Right now our CNC's have 5mm brad tip bits installed. In my other CNC's at other companies we opted for V-tip bits so we could drill for pulls without blowing out the front faces of the doors. I don't recall this 'Type Info' setting in those tool filesTemplate Time Stamp
Strange, I have a template with a date in the 1600's. Anyone else experience this? Wonder what life was like working with a computer in that Century.Cloud Enabled Workflows
--Was recently approached by a freelance drafting firm making the following claim: Although I've set up remote access via VPN, RDP, etc. in the past, this is the first I've heard of MV natively supporting it. Is there any truth to the above claim or is.mprx vs .mpr loading into WoodWOP
Anyone have experience with the .mprx format? We updated the tool file extension in the settings to .mprx, which changes the file, but produces an error when trying to load directly into WoodWOP. Just curious if anyone else has had this issue and figuredFEATURE REQUEST - Project Specification Group In Use Message
When editing Project Spec. Groups it is possible for more then one engineer to have them open. This can cause the changes to be over written due to the caching of the data when the editor is opened. It would be nice for those of us that use SQL SeverFOUNDATION ADA Sink Angled Frame - Bracket 3D Controls
For the life of me I cannot find where the 3D for the ADA Brackets is hiding within the prompts of the Foundation ADA Sink Frame. As in our Foundation Library the A&M Brackets draw in 3D just fine but the Rakks ADA Brackets do not draw at all in 3D. IToe Kick nesting
Does anyone know why the toe kick nesting notch now does this instead of just cutting a square out? It feels wasteful in nesting time, and I cannot find the setting to turn it off.Toolbox Error when importing pdf's
Hello, anyone dealt with this kind of error? It happens when I import the second pdf. After the message Toolbox crashes. Thanks.brics cad viewbase
hey all does anyone know how to remove the view outline in the view base in brics cad see attachedHow to scale the UI?
We are using OEM and some of our drafters are looking to get the UI to scale a little larger so its easier for them to see. Is there an easy way to adjust this for them and scale some things bigger?Material Requests for Multiple Cabinet Runs - How do you handle them?
I am wondering how other cabinet shops are handling material requests when you have a project that has multiple runs? We use production Coach and do cabinet runs of 30 to 60 cabinets, and have been doing a separate material request for each run, and thenTrim Cuts
When cutting a sheet that has both face 5 and 6 machining, we machine the face 6 first as a full sheet. Microvellum does a trim cut for a reference edge before flipping, however this cut is a full depth pass. Is there a way to control this so that itFeature Request: Onion Skin only Small Parts with Multi-Pass Tooling
We have been working on dialing in our tooling strategies lately, and have had great success with a maximum pass of 1/2" while using 1/2" tooling. A majority of the material we work with is 3/4", so that's running two passes (one at 1/2", one at 1/4").Tool Assignment For Border Cut On Flip Operation
Can someone help me locate the tool assignment for the router used to cut the reference edges when there is a flip operation for a nest? We changed our default routing tool to 1012 but the reference edges are still being cut with the old default 100Update 25.1.1107.641 .zip | Install File
Would anyone be willing to share their 25.1.1107.641 update .zip file? Any help would be greatly appreciated!Make Saw Cut Last
How would i make the saw on our Biesse machine cut last? I use it to trim the offcuts into a sensible handling size and not have silly shaped pieces, however since ive been doing this it uses it fairly on in the cutting process which has led to a fewRoadmapping Focus Group Recordings
Not sure we posted these anywhere, all MV customers have access to these in peAk: Focus Group #1 Recording Focus Group #2 Recording We will be establishing a Q4 roadmap this week, and then we will hold a (recorded) webinar to unveil it and publish itHere are most of the A&M brackets
A while ago, I contacted A&M about adding their brackets to our library and sharing them with the MV community. Jared Ingold at A&M kindly sent me a number of drawings to work from. I have the 3D models (drawn in metric for inclusivity) finished but stillFace to Face associative machining
I am trying to add location dowels to some parts I am not sure the best way to make them parametric and associative. Anyone done this before? If so can you please assist? Thank you.Customer Focus Group: Q1 2026 Planning
It’s that time again, when we get together to talk about what we prioritize next quarter. Our Q1 2026 Focus Group is coming up on November 20th, and this session is all about hearing from you and what you’d like to see us focus on next. We use your feedback,New Toolbox Release Available Today: Build 25.1.1107.641
We are happy to announce that Toolbox build 25.1.1107.641 is now available! This build includes resolutions for various issues with the Beta Optimizer, subassembly names and prompt values, extruded products, and more, as well as improvements to certainglobal switch for changing drawer color
is there such a switch if so were, if not why not as it would help with ordering the correct hardware.FEATURE REQUEST: Revert Subassembly in Prompts UI
This would be a helpful addition and would eliminate having to open another UI to revert a subassembly. James Drury Technology Advocate MICROVELLUM SOFTWARE LinkedIn Vimeo[Sharing is Caring] Elliptical Cutout
I had to do an elliptical cutout in a countertop (undermount sink). This gets you a pretty good result, but will still need some hand-work to smooth it out after. Add the prompts in the attached .CUTX to your product/subassembly. -EzraDownloading Sandbox Database
I am trying to install a sandbox database but all the links to download the foundation library lead to dead ends and broken links. I downloaded it before and didn't have these issues. I am trying to download the autocad version to install as a local database/sandboxChange Room Automatically when you change tabs
It would be very nice to have an option to allow us to change the current room when you click on your tabs.Where to adjust the router in/out angle
When MV creates our gcode, our operators have been telling me that the in/out angle is too steep and has been causing issues. They just change it now at the machine but Id like to fix it so they dont have to spend the time to do that every route. LooksFormula Help - works in Legacy Library but not Foundation Library
We are setting up our Foundation Library and are bringing over our Lookup Table for all of our in house custom moldings we make and I am running into the issue where the following formula no longer works in the Foundation Library like it currently worksBase 2 Door 2 Drawer- Drawer Problem
The Base 2 Door 2 Drawer cab doesn't show the drawers correctly, it is missing parts and placing parts out side of the carcass. Has Anyone seen this before? Not sure how to fix it. This is straight from the library no modifications.Single Doors and Single Drawer Fronts should be included with perfect graining
While working with a material with directional grain (cathedral grain), we discovered the "1 Drawer Base" drawer front did not nest with the same orientation as the adjacent products. My ticket to Microvellum informed me that "a minimum of a pair of partsIntroducing the Next-Gen Optimizer: Now in Beta
We’re excited to introduce a new generation of optimization tools—now available in beta. This release marks a major step forward, featuring an all-new optimizer built from the ground up with a modern, flexible architecture and a powerful genetic algorithm.Q4 2025 Roadmap Preview
Did you miss yesterday’s roadmap preview event? Here’s a quick summary of what made it onto the roadmap this quarter. Remember, these are the items we’re committing to, not the only things we’ll be working on. .......... CAD/CAM Decoupling Machine Code/PostNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnNew Microvellum Release Available Today: Build 25.2.0114.641
We are happy to announce that Toolbox build 25.2.0114.641 is now available! This build includes resolutions for issues with the Processing Center, saw trim values, label output file paths, and more. Additionally, in accordance with Microvellum's new subscriptionWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: