Production Designer Australia Sydney
PRODUCTION DESIGNER About us We are a dynamic and growing Building & Joinery company based on Sydney's Northern Beaches Australia. We cater to clients on the beaches and throughout Sydney in both the Residential, Commercial and Hospitality sectors.Hide products in the product list?
Is there a way to hide products that have been dealt with on this list? After having a couple hundred products and some that have already been produced , I would like to "hide" the ones that have already been produced.Dynamic Materials Grain Formula
Good Morning, I'm working on setting up some dynamic materials, so far so good. I'm just working on a naming convention for the materials. But I also want that naming convention to drive some attributes ... what I'm stuck on is the Grain Formula. I can'tWelcome to Me!
Good morning to all, Excited to announce that I downloaded my first Microvellum software last night and am eager to get started and looking forward to working with as many of you here as possible. I am a cabinerd since 1995 and know the industry. WeNew release available today: Build 21.1.0127.641
We are pleased to announce that the update to build 21.1.0127.641 is now available! This maintenance update provides users with access to Toolbox 2021, the latest release of our AutoCAD OEM platform. This build also officially supports full version AutoCADDADO Clearance at SMA
Happy Friday Everyone, Wondering how do you guys tackle the issue of dado clearance with Solid Modeling Analyzer? Let's say we have a .5" thick material dado into another material, I'd like the dado width to be slightly bigger at 0.51" wide. Is thereDoes anyone know how to change the text in a value reported from a field?
I have a title block that is all done in Times New Roman, but values reported from a field are what appears to be arial. I want to change them to Times New Roman. Does anybody know how to do this? I can't seem to find it in autocad help, or in youtube.SOLUTION REQUEST: Have SMT Create a Layer Specific For Construction Paths
I thought there was a post about "rebuilding products from an existing session" on here, but I can't find it. Or perhaps, the question came up during the IWF Connect - SMT session. Either way, the question was in regards to construction paths; somethingHaving issues with rear modifications
I have 3 upper cabinets next to a hood and the client wants ductwork to run through the uppers to vent outside for the range hood. I use the top notch rear modification to do that and set my size but I am getting a few problems. It is not notching theMicrovellum & INNERGY Educational Sessions
I wanted to invite you all to the free educational sessions (not software centric) we are offering at our Virtual Summit this week. There is no cost involved for this track. All you need to do to register is go to the registration page: https://www.innergy.com/summit-registrationPart/Full time Microvellum drafter
Hi, The New Traditionalists and ducduc located in Connecticut are looking for passionate and skilled microvellum drafters to join the team! We create a variety of products from children's furniture that ranges from flat pack to custom projects and createSaw files in Work Order Folder
Submitting this Idea for a user (John Savoy @ Phoenix Millwork) He would like if the Saw Optimizer Output files were placed in the Work Order folder the same as the CNC output files. Right now they are only sent to Secondary Folder Locations that the user has to setup. Thank you,machining
Bonjour . dans ma CNC j'ai plusieurs mèches de 5 mm et 8 mm , mais j'ai remarqué qu'il y a seulement 1 mèche qui fonctionne à la fois , est ce que c'est le cas chez vous aussi ou bien ça descend plusieurs au meme temps ? merciCAN SOMEONE DIRECT ME ON HOW TO CLEAN UP CORNERS WITH A SMALLER BIT IN A 2ND PASS?
i need to go back into an inside corner to clean up with a smaller bit to reduce the radius.use solid model tools for more than just die walls and counter tops.
i would like to see a tutorial on how to use solid model tools for more than just die walls and counter tops.Make it possible to remove edgebanding from several pointers at a time.
Many times we don't use edgebanding in a job, and to remove an edgeband selection from a pointer, you use the right click menu but you can only address one pointer at a time. I'm suggesting MV allow multiple pointers to be selected at one time to makeWhat's the quickest and easiest way to add pricing to material/hardware?
I'm upgrading to a new library and need to update the pricing on all of our material and hardware. Looking for the best way to go about doing this. Any help is appreciated.MODIFING A SAW PATTERN LIKE A NEST PATTERN
So i know you can go into the composite dwg of a nest and "fix" a nest that had a less than desirable optimization, but is there anyway to do this to a saw pattern? So many times i get an optimization that can clearly and easily be fixed or made better2D vs 3D
I would like to draw in 2D instead of 3D. I changed this in the preferences box but it still draws everything 3D.Error Code Number List
Is there a list that shows the meaning of all the Error Code Numbers?'Home' in Part Visualization
Not sure when this started but in v1216 the "Home" icon in Part Properties Origin & Rotation does not reset the part to the original view. Home sets the part to the opposite view of the original. If the parts are SW when opened, Home sets them to SE,Corner Cabinet
I am not sure what is going on with my corner cabinet. This is the first project I have drawn where the corner cabinet has done this. To my knowledge i haven't changed any settings that would have affected this. Any ideas would be greatly appreciated.How do updates or Lack thereof impact the software
When I imported a "work from home" project to our Network, all my 3d products became invalid. Could this be because of a missing update or patch.??process
hello est t'il possible de combiner deux projet ensemble dans le process ?Sample csv file for the Razor Gauge
Let me know if I am using this site correctly. ThanksWho is using a software for scheduling/proj mgt with MV and which one?
After listening to me suggest it for 7 years, my employer just came up with the idea to use a software for scheduling jobs throughout the shop and for installation. Now it's a good idea because the man who has been taking care of this manually foreverWhat Happened???
I really don't know what I did, probably something simple. But I was drawing face frame tokens for a job and now I can't see any of the cabinets in the whole project. I have tried to change views and nothing. This is all I get when I try to click in modelSolid Timber Shaker Doors
Hi there Hoping to get some help understanding the door process in Microvellum. Im a new user, looking to outsource my "box" construction and run all my own doors. Looking at Hardwood Shaker type doors, can i set it up so that the cutting list is generatedHow can I forumlize a material for a part in a custom library product?
I need to specify the back of a custom product as MDF unless it's height is greater than 12 inches, in which case it is 3/4" mahogany veneer on mdf. Is there a way to do this with materials?Solid analysed Parts twisted in the "draw parts in 2d" and in the Nest.
Scince the update from 2019 -2020 Solid analysed parts are now often twisted in the "draw parts in 2d" and in the nest. Is there a solution for this or a setting that will prevent this? I continued using 2019 as I could not use 2020 because of this issueNew release available today: Build 20.1.1216.641
We are pleased to announce that the update to build 20.1.1216.641 is now available! This maintenance update contains changes and fixes related to the 2D Parts Editor, Machine Tokens, Part Properties, CPOUT, MV Commands, Specification Groups, Nest CompositeHanging System
Does anyone here use a hanging system for their upper wall cabinets? I know this is pretty common in the closet industry which we don't do a lot of right now, but definitely would like to in the future. Anyhow, looking for some feedback if it is worthFiller w/ Return
Any time I change the left side to an applied panel on one of the Filler w/ return panel products it gets placed incorrectly. But, the applied panel on the right side works perfectly fine. Any suggestions would be appreciated.constructing a 3 bay mail slot cabinet
I need some help with this as I have spent a couple days and still have not gotten anywhere. I need to make a mail slot cabinet with 3 bays, 9 openings each bay. The shelving is to be 1/4" MDF removable shelving, slides out the front and held in placeMicrovellum part/full time outsource drafter
Hi, My name is Bailey Tam and I am the engineering department lead at The New Traditionalists and ducduc located in Connecticut. We create a variety of products from children's furniture that ranges from flat pack to custom projects and create largeMicrovellum
A while back ago, Microvellum had a Virtual school all week long. They said that they will post it to rewatch and learn some more of the new things. Is it available anywhere?Importing AU Premium Library 20_1_3 into Toolbox 2020 build 20.1.811.641
Hello I have a new machine. I have installed a fresh Toolbox 2020 build 20.1.811.641 and the AU Premium Library 20_1_3. I need help importing AU Premium Library 20_1_3 Any advice please? ThanksHow to turn off elbow catch machining?
Is there a simple check box for this, to turn off ? We do not machine for this on the floor , so I would like to take it off instead of going though the composite drawings searching to delete. We use it for the material take off but for production i wouldAdjustable Height Base Question
I'm looking at making an adjustable height table in my home shop and trying to utilize all the space that i have. Just wondering if anyone has any suggestions for a base that can handle some weight and has a built to last framework. I would like a crankOnion Skin Help? Tool Deflection? or Parts moving?
We are having issues with onion skinning leaving a lip on the bottom edge. But only on one side of this part.(See Pics) It doesn't look like the part moved because the lip is on the side where the lead in-out is on. We are currently doing some tests, Is the clean cut where the router has a full load ,or on sides next to other parts where it only gets to cut half of the material?Next Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Toolbox Release Available Today: Build 24.1.1125.641
We are happy to announce that Toolbox build 24.1.1125.641 is now available! This build includes a resolution for an issue with setmill placement on parts with IRIB enabled. Please refer to the complete Release Notes for more information on these changes.Microvellum Q&A Sessions
This post catalogs Microvellum's Q&A Drop-In Sessions from the year of 2023 to the present day. In Q&A sessions, Microvellum's team of experts help answer questions from clients regarding Toolbox, product engineering, software updates, troubleshooting,New Toolbox Release Available Today: Build 24.1.1105.641
We are happy to announce that Toolbox build 24.1.1105.641 is now available! This build includes resolutions for a fatal error that would sometimes occur during processing, as well as issues with the software feature warning clients when their databaseNew Toolbox Release Available Today: Build 24.1.1030.641
We are happy to announce that Toolbox build 24.1.1030.641 is now available! This build includes resolutions for issues with routing and door profiles, specific settings within data access, the setmill of extruded products, the Library Update Utility,New Foundation Library Release Available Today: Build 24.1025
We are happy to announce that a new update for the Foundation Library, build 24.1025 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, updates to existing products to improve functionality,
Follow us on: