Hawa Concepta III
Just wondering if MV are looking at adding the Hawa Concepta 3 pocket door system?Activity Stations Setup
Hi all, If this can't currently be done (as I can't find out how) it would be nice to have multiple activity stations setups? As in:- Department 1 Department 2 Ect.... And select which one to use when processing a work order for cost/quote reports? ReasonUnable to configure database in Microvellum
Hello Team, We are facing problem to configure our database (Projects) in Microvellum. Need your urgent help/support to solve this issue as soon as possible. Thanks & Regards, Hardik Panchal. +91 798 40 87 569 hardik.panchal@hitechdigital.com MS Teams:-WORK ORDER - PART QTY
Sometimes parts are damaged and need replacing, this isn't too difficult to address when there are single parts, however when workorders have been made with multiple products there are multiple parts also made in the workorder. Is there a way to changeHinge Holes
Hello Everyone, I am wondering if the is a way to drill the two screw holes on the sides of the hinge, We currently drill the hinge cup hole and would also like to drill the holes for screws but I cant find a way to switch from press in to screw in, orblum servo drives
hey all does the AVENTOS HF bi-fold lift system have the servo switch in microvellum at all i cannot seem to find it and also drawer systemsSingle Part Editor - G-Code Filenames
In the Single Part Editor, when I create a new panel, I give it a specific name. And when I create the G-code for this panel, Microvellum gives it's the G-code file a random numerical name. Back in v67, the G-code filename would be the same name as thecopy and paste
Can someone tell me why on some of our work station you can copy and paste entities from Autocad into MV with no problem and some can't, it comes in as OLE? Is there a variable somewhere?Passwords in Mircovellum
I have cleared passwords in Microvellum without turning the login prompt off. Now it will not accept anything for a password. Any thoughts on how to fix this?Product Weight
Is there a way to calculate the weight of a product? I see a prompt in the starter products but no value or equation to drive a value. My current library I'm running is 46.1 and I'm on build # 15.6.730.640.What are the indications that unusual noises coming from your HVAC system might be a prompt signal for urgent repairs?
The flawless operation of your HVAC system is intended to deliver comfort without causing any disturbances. But when strange noises begin to come from this important system, it's not just a nuisance—it's frequently an indication that urgent repairs areFEATURE REQUEST - Correct Shelf Wide Span Calculation with Divisions
Products are no longer recalculating the Shelf Wide Span Width distance when a Division is selected. For example, a 36" wide base cabinet would use a 1" shelf because the Shelf Wide Span Width is set to 32". When a Division is added, one would expectFeature Request - Add XLOOKUP function
The XLOOKUP function would be useful when searching table data.Warning messages not showing through project properties
Hi. Just finished setting up our new cut part and edgeband wizards and I have added a few warning messages for the end user. Works great if you open the wizards through the advanced project setup, but I get no warnings if gaining access to the wizardsPart CNC nest spacing for various tool diameter?
I see there is a default gap spacing on parts nested on a sheet . Can that be set up to accommodate different tool diameters? Or is this pretty much a one and done option ? We are currently at a .5 part nest spacing in between parts , if changing toMaterialProperty Function Issue
Yesterday, I realized the part grain override formula (to force length/width grain direction) in our library wasn't working. The formula is giving a #NAME error for every part. I'm not sure if this was customized from the standard library at some point,Phase Status Indicator
Back in the day, V6 I remember that you could modify the phase or item to indicate that it had been released. It would be handy at times to have this feature returned. Maybe this is still there and I just haven't found it.How to get lookuptable value using row and column
Hi. Could someone please help me with trying to get the value from a look up table which is basically combining the VLOOKUP and the HLOOKUP, if that makes sense. So, I have a table for board materials where the rows are the board name and the columnsTokens
Hi For the "add" to add a token where are the settings for this as per the 2 screen shots attached? As I want to make a few small changes so each time its used to comes out to what we use instead of making changes each time. I know they can be saved toEngineering/drafting services
Hello, if anybody is in need of AutoCAD drawings or Microvellum help I can offer my services at a low price. Ideally looking for a long term relationship even if that means on and off work for the time being, large or small projects. Comment below.Updating to The FLA Builds
Hello everyone! Now that some of the dust seems to have settled regarding the FLA change, and there seems to be a large pool of users who have updated to a build that forces the FLA, I wanted to see what y'all thought the pros/cons were of floating licenses.Parametric Default Tool Depth?
Trying to set up a Multi-Pass tool, and would like to have the depth of an operation be parametric. Since we'd use this tool on parts that are +/- thickness and want to always have it cut 2mm shy of all the way through. How can we make consistently shyHow to know the correct placement for machining when using 2D Part Editor
We had a question come up in our product review meeting about the best way to determine where to place a machining operation when using 2D part editor. It can be confusing to know how a part is orientated when seeing it in 2D compared to how it looksFoundation- "Ladder Style" Toe Kick Assembly
I am trying to write a formula for a DIM referencing "Toe Kick Space". Have tried adding a few different Prompts with no luck. Any insight will be appreciated.MV Assistance
Hey MV Community, I've been out of the MV game for a while and need some assistance. I'm looking for the best way to make a custom product for this outdoor trellis. Can anyone recommend a product to start with and formula for the 1x3 Slats where the sizerouter time
does MV have a utility that calculates router run time for a work order?SMA and Profiles
It would help to understand why SMA does not create the profiles for a Solid Surface edge and cove detail, that I drew. First pic shows SMT making what I want and pic 2 shows what SMA creates.New Toolbox Release Available Today: Build 24.1.0703.641
We are happy to announce that Toolbox build 24.1.0703.641 is now available! This build includes resolutions for issues with nesting tooling order, custom strings in horizontal boring, edgebanding data populating exported orders, and more. Please referDuplication error
I Keep getting a weird duplication happening with my units, its hard to pin point when, but in this scenario, it is a 80% custom unit. It happened when i had closed part editor, used the prompts page to then adjust the height of the unit to make sureglobal variables in library updates
I had the impression that with the foundation library updates, new global variables would be appended to existing global files. even ones that had been renamed. this idea came from this article toward the bottom: "No spec group (global or wizard) workbookLicensing Portal - Where to access?
Hello, Just wondering if anyone knows where to access the Licensing Portal? I'm getting this error message because all available Microvellum seats are in use. It says I can check a licensing portal to see who's currently using the seats, but I can't findJobman Integration
Hi, just wondering what file type the Jobman ERP system actually requires, none of the help guides ive seen specify and everything ive exported from MV has failed to work with Jobman. ThanksAvoid printing empty reports
Is there a way to avoid printing empty reports? Thank you.viewbase
hey guys i use view base for all my drawings these days but i am wondering is their a way to show door swings and drawers on plan view on my setup it doesnt come through.Shelf Hole Spacing
I have a 2-bay cabinet. Both bays have adj shelves. Anyone know how to get different shelf hole spacing per bay. I can change the spacing but not per bay.Tabs
Can someone please point me in the direction to find "tabs" for small parts on Microvellum? On Vcarve (we use for super specialty stuff), it's a prompt in the tool path section but we cannot seem to find in on MV. TIA and Happy Birthday America!!F Workbook & Database Explorer
Is it possible to export/drag drop the F Work Book? We have a sandbox that gets updated and a main configuration the Drafters/Layout Techs use. I've been manually updating the F Workbook Changes. I was wondering if there is a way to Drag Drop it from2D MACHINING
can anyone explain to me why it is when we add machining to a part in the edit part in 2D and then process the part it loses the correct tooling. I have a part the has a cut thru with the cutout tool and a single line path with a 45 miter. when i processImport General Contacts
Has anyone succefully exported / imported contacts from one SQL CE to another SQL CE? An option in Utilities Database Management would be nice however it's not currently an option.Fulterer Drawer Guides
Does anyone use the Fulterer Drawer Guides? They are not an option in Microvellum and wondering how much work would go into adding these guides? We are looking at options for heavy duty and soft close other than KV guides.Next Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Microvellum Q&A Sessions
This post catalogs Microvellum's Q&A Drop-In Sessions from the year of 2023 to the present day. In Q&A sessions, Microvellum's team of experts help answer questions from clients regarding Toolbox, product engineering, software updates, troubleshooting,New Toolbox Release Available Today: Build 24.1.1105.641
We are happy to announce that Toolbox build 24.1.1105.641 is now available! This build includes resolutions for a fatal error that would sometimes occur during processing, as well as issues with the software feature warning clients when their databaseNew Toolbox Release Available Today: Build 24.1.1030.641
We are happy to announce that Toolbox build 24.1.1030.641 is now available! This build includes resolutions for issues with routing and door profiles, specific settings within data access, the setmill of extruded products, the Library Update Utility,New Foundation Library Release Available Today: Build 24.1025
We are happy to announce that a new update for the Foundation Library, build 24.1025 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, updates to existing products to improve functionality,Component Cabinet Library PDF Archive
As part of the End of Life for the Component Cabinet Library, the majority of articles on the Component Cabinet Library have been removed from the Microvellum Knowledge Network. However, we are fully aware that some users may still require the documentation
Follow us on: