It would be helpful to our nesting labeling process to have a way to add labels to a default part label group and be able to change the part label per piece from that group when processing batches similar to assigning a toolfile to parts in the processing center. There could still be a default label that would be assigned to the parts but the option would be there to change the label from the nesting label group for any parts assigned to a Nesting processing station and from a saw label group to any parts assigned to a sawing optimization station. Or even if the machine operator was able to easily select a different part label on the fly depending on the type of parts being cut it would be convenient. Currently we have to change the default label and reload the entire workorder at the machine if we want to change the label that will be printed on a part. Our preference is to use 1x4 labels but they aren't large enough to have all of the desired information on one label for every type of part. When parts are mapped to following processes they could also have a label which would have the relevant info to the route that part takes through the manufacturing process.