Afternoon,

The problem I'm having is that when I output parts (to Ardis, which then distibutes it to our beamsaws) all the parts show up with the .03125 premill allowance missing. 

For example, a 5" wide spreader would have .125" edge banding on a single edge. So 4.875". But the edge bander takes a 1/32" premill. So I need an additional .03125" to account for that. But the part just comes out at 4.875" instead of 4.90625". 

The "legacy premill" is selected. How can I get it to actually output on cut parts?