Microvellum Foundation Library Release Notes | Build 22.1207
The following release notes apply to Microvellum Foundation Library, Build 22.1207
Additions:
- Added a new subassembly called
“Decorative Routing” which can be added to any product to produce parametric
decorative routing to any face. To demonstrate, this has been added to the
Valance product and the Box End product.
- Added a generic 2D Leg Leveler section drawing to represent leg levelers in 2D cabinet sections. Updated the hardware drawing “Leg Leveler Section.dwg” to match your desired leg leveler.
- Added new global variable “Cabinet Depth Includes Door”, located inside the User Preferences category. Select the checkbox to include the Finished Face (Door) thickness and the Door to Cabinet Gap as the product depth for open cabinets. Otherwise, the Depth of all cabinets will only be the carcass box.
Added a new subassembly, “2D Instructions”, to facilitate a new location for storing 2D draw tokens (see Modifications below).
Modifications:
- Moved the location of all 2D Plan
view, Elev view, Cross Section, Elev Section, & Plan Section draw tokens
for most regular Frameless cabinets. They are now inside a single new
subassembly called “2D Instructions”. At this time, the Corner, Angle, Closet, Face
Frame, & other specialty products remain unchanged.
The reason the location of the draw tokens was moved is to encourage users to customize their own 2D text, dimensioning, and other annotations. After this update, users can exclude updating the “2D Instructions” subassembly, preventing their customizations from being overwritten.
- The default Depth value of all
open cabinet products will no longer include the door thickness & gap.
Select the new global option “Cabinet Depth Includes Door” to revert to the
previous behavior.
- Selecting Screw Construction for Nailers will automatically switch to Dowel Construction at Finished Ends.
Resolutions:
- Resolved origin issues in certain cabinets when the finished end was
a different thickness than the unfinished end. This occurred in double drawer &
blind corner with drawer cabinet products.
- Resolved issue in the “Internal Drawers With Faces” subassembly.
Drawer Depths will now calculate correctly.
- Resolved issue with certain Tab Pull 2D elevation drawings.
- Resolved issue with Aluminum Handle Door 2D elevation at Upper
cabinet conditions. Also, the handles will now be on the HWR layer.
- Resolved
issue with Blind Corner Mounting plates. Plate Location From Door Edge
(X Origin) was not correct for Right Swing conditions.
- 2D Cross Section drawing of Countertops will now follow the parametric
depth of the cabinet product instead of a global depth value.
- Resolved a Fixed Shelf Dado thickness issue inside the Vertical Splitter subassembly.
Related Articles
Microvellum Foundation Library Release Notes | Build 24.0919
The following release notes apply to Microvellum Foundation Library build 24.0919 Additions Added 5 new special Wine Rack products and 9 new Wine Rack Insert subassemblies. Products: Master Vertical Wine Rack Corner Frame Master Vertical Wine Rack ...Microvellum Foundation Library Release Notes | Build 24.1025
The following release notes apply to Microvellum Foundation Library build 24.1025. Additions Added new global variable “Remove Stop Dado On Bottom Edge” for wood drawer boxes. Check this option to run the dado through at the bottom of the sub front ...Microvellum Foundation Library Release Notes | Build 24.0823
The following release notes apply to Microvellum Foundation Library, Build 24.0823 Additions Added a new global variable option, “Rebate With Router And Saw”. Selecting this option will enable two machine tokens per cabinet back edge as it associates ...Microvellum Foundation Library Release Notes | Build 22.0114
The following release notes apply to Microvellum Foundation Library, Build 22.0114. Please make sure you are selecting the correct specification group when drawing products. There are specification groups for both metric and imperial. Additions: ...Microvellum Foundation Library Release Notes | Build 23.0113
The following release notes apply to Microvellum Foundation Library, Build 23.0113 Additions: Implemented a "Push Catch All Doors" option in the Hardware Wizard. Added the "Magnetic Catch Liberty" hardware option as an alternative choice for push ...
Recent Articles
Toolbox Release Notes | Build 25.1.0221.641
The following release notes apply to Toolbox build 25.1.0221.641 UI Fixes An issue was reportedly occurring when users utilized pop-out menus near the edge of a screen on a multi-monitor workspace. When popping out a sub-menu, it is expected for the ...Toolbox Release Notes | Build 25.1.0213.641
The following release notes apply to Toolbox build 25.1.0213.641. Stay Down Nesting Additions 3 new settings have been added to Stay Down Nesting, to resolve specific issues with routes and connectors that have been reported: Fig. 1: New options in ...Toolbox Release Notes: Year of 2024
This document will catalog all releases for Microvellum Toolbox software builds that were released in the year 2024. This encompasses builds 24.1.0104.641 to 24.1.1206.641. Toolbox Release Notes | Build 24.1.1206.641 The following release notes apply ...Toolbox Release Notes | Build 25.1.0129.641
The following release notes apply to Toolbox build 25.1.0129.641. SMA Fixes A wide variety of issues with the Solid Model Analyzer have been resolved. Multiple modifications to existing interfaces or settings have been made to improve precision and ...Microvellum Foundation Library Release Notes | Build 25.0124
The following release notes apply to Microvellum Foundation Library build 25.0124. Additions Added Century Components Waste Bins, Vanity Organizers, and Base Cabinet Organizers. 11”, 14”, 17” Signature Series Bottom Mount 34qt & 50qt. 4”, 5”, 6”, 9”, ...