Being able to control perfect graining included in a single product, or even from product to product has been difficult in previous Microvellum releases. There is now the ability to tell the optimizer what to perfect grain inside of a product, or ...
There are two different types of graining in Microvellum. One is the ability to set the grain of a material or an individual part. Setting the "material grain" to the width or length of the material means that you are determining that parts from that ...
The bitwise values for column J referenced in this video are listed below. 0: No forced grain, IRIB 1: No forced grain, Don't IRIB 2: Forced Length, IRIB 3: Forced Length, Don't IRIB 4: Forced Width, IRIB 5: Forced Width, Don't IRIB For more ...
Office Furniture Library Expansion The Microvellum Office Furniture Library contains an in-depth collection of furniture products. This library is intended as a foundation for manufacturers to establish their own catalog. Products can be created and ...
Material Levels in Toolbox Figure 1: Library Specification Groups. Figure 2: Project Specification Groups. Materials in Toolbox can be controlled through one of two interfaces, each of which is attached to one of two levels of control: library ...
The following release notes apply to Toolbox build 24.1.1206.641 MV Server Nesting Fix There was a reported issue occurring when users attempted to remotely process work orders using a nesting station on MV Server. When attempting to process the work ...
The following release notes apply to Microvellum Foundation Library build 24.1127. Additions Added a new Soffit product to the Upper Cabinet Accessories category. Added the Top Filler (Ceiling Scribe) option to Upper and Tall cabinets. (Corner ...
The following release notes apply to Toolbox build 24.1.1125.641. IRIB Setmill Location Fix Fig. 1: Setmill being moved to the start of the route (top) rather than at the center of a straight line, as intended (bottom). There was an issue reportedly ...
The following release notes apply to Toolbox build 24.1.1105.641 Nesting Fix Fig. 1: The fatal error that would occur during processing. There was reportedly an issue that occurred when clients attempted to process a work order using the nesting ...
The following release notes apply to Microvellum Foundation Library build 24.1025. Additions Added new global variable “Remove Stop Dado On Bottom Edge” for wood drawer boxes. Check this option to run the dado through at the bottom of the sub front ...