Solid Model Properties
Solid Model Properties
The Solid Model Properties interface allows you to set up the values for parameters to your preferences. Setting up these values will speed up the creation of smart layers. They will also speed up the process of creating products using the Custom Product Builders.
Related Articles
Solid Model Analyzer - SMA (Reference)
This article is a reference article explaining how to work with various types of products in the Solid Model Analyzer, also known as SMA. It also explains the commands and properties that apply to SMA. See Using Solid Model Analyzer - SMA ...Solid Model Analyzer - Solid Analyzation Tab
You will find these properties on the Solid Analyzation tab of the Microvellum Options page. Each section below contains the properties listed. Fig. 1 – Solid Analyzation Properties Material Thickness Section Fig. 2 – Material Thickness Options ...Solid Model Analyzer - SMA (Overview)
Description Solid Model Analyzer is a powerful tool included in certain product levels of Microvellum. The design and manufacturing industry is steadily moving closer to the adoption of 3D design for its verification and visualization abilities. The ...Solid Model Analyzer - SMA (Tutorial)
Description This document gives you a step-by-step tutorial on how to use the Solid Model Analyzer (SMA) to create a Microvellum product from a solid model. Before using this tutorial, you need to have a solid model in an AutoCAD DWG file. You may ...Solid Model Analyzer - Frequently Asked Questions (FAQ)
Question: Can I use the AutoCAD Command SPLINE to create a construction path? Answer: Using the AutoCAD Command SPLINE will result in a segmented path when selected as the construction path. A PLINE must be used for the construction path to be ...
Recent Articles
Toolbox Release Notes | Build 24.1.1105.641
The following release notes apply to Toolbox build 24.1.1105.641 Nesting Fix Fig. 1: The fatal error that would occur during processing. There was reportedly an issue that occurred when clients attempted to process a work order using the nesting ...Microvellum Foundation Library Release Notes | Build 24.1025
The following release notes apply to Microvellum Foundation Library build 24.1025. Additions Added new global variable “Remove Stop Dado On Bottom Edge” for wood drawer boxes. Check this option to run the dado through at the bottom of the sub front ...Toolbox Release Notes | Build 24.1.1030.641
The following release notes apply to Toolbox build 24.1.1030.641 Routing and Profile Fixes Several issues were found with routing and polyline paths: Fig. 1: Horizontal routes off of a part disappearing (left) and appearing correctly (right). When ...Toolbox Release Notes | Build 24.1.1010.641
The following release notes apply to Toolbox build 24.1.1010.641 Biesse Winstore Fix Several issues with the Biesse Winstore plugin have been resolved: There was an issue that would sometimes occur wherein materials that were intended to stack wound ...Toolbox Release Notes | Build 24.1.1001.641
The following release notes apply to Toolbox build 24.1.1001.641 HBore Toolfile Fix Fig. 1: The location in the Toolfile UI where the error would occur. There was an issue reported with the functionality of the Horizontal Boring Machine setting in ...