Verify In Field (V.I.F)
Hey - new to Microvellum – how do I turn off the setting by default that is making all walls show V.I.F. when drawn?Drawer Division FF formula is wrong
As title states i think the drawer division FF formula is wrong. If I leave it set to defaults, the division is placed behind the frame as expected but finishes to to the back of the backboard. In the picture, on the left division is my setup and on theFormula for Horizontal Opening Splitter FF is wrong when using "double" overlay control stile
As the title states i believe the Formula for Horizontal Opening Splitter FF is wrong when using "double" overlay control stile , when I set mine to double the center stile stays central where it should be, but both parts of the carcasses side cheeksDRAWLEADER Improvements
Hey ya'll, I'm currently in the process of trying to automate some callouts on our 2D drawings and came across this issue with the DRAWLEADER token. Right now it just draws a two segment polyline where one of the vertices has a modified width to makeIDW file creation upon saving AutoCAD file
While working with Microvellum, my coworkers and I often come across an oddity where .idw files will be created and stored in the folder with our DWG files every time we save our drawing. By the time we've finished a job, there will be upwards of 20+Layer Separate from FP/Elev/Open
Currently the Floorplan and Elevation fall on the same layer. Placing on separate layers would allows for different linetype, colors, weights. The Open cabinets all fall on the same Finish# layer, so the FP/elev are the same, but also doesn't delineateNo Machining options in Pigeonhole Insert subassembly prompts
I am trying to make a relatively large pigeonhole cabinet. I started by dropping an open upper into my room, and then added the pigeonhole insert in the Interior Components selection. Now I have shelves and dividers with cross lap joints just like I wanted.FEATURE REQUEST: Change "Filter Parts" in Edit Design Data to a Toggle or Radio button instead of a Pulldown Menu
When in Design data, to curate the Used Parts or All Parts to display we have to click the "Filter Parts" button. But then an option has to be clicked. Double-clicking does not change the option. This makes it an On/Off choice which does not make a Pull-downERROR CODE 115028
IS ANYONE EXPERIENCING THIS ERROR CODE WHEN WORKING 115028Plot Layers Based on Page Setup
Hello everyone, Our company is slowly making the switch from using one big franken-file for a job (up to 100 sheets) to doing one .dwg per room. In the spirit of pushing this transition along a little smoother, I am trying to overhaul our templates toLamello Cabineo Display Issue
I am getting an odd image when using the Lamello Cabineo fasteners in both 3d and section views. Any idea why I am getting this? It does not seem to affect machining at all so it seems to just be a graphic issue. I am leaning towards it being the coverMicrowave base cabinet with open coloured box above
Have a unit to suit Microwave open base cab with drawer below currently only has the option to suit trim kits no coloured internalsParametric list for EDGEARRAY
Asking for a friend:) How can I generate a parametric list of locations? I am messing with EDGEARRAY token and the first parameter is the list of numbers that determine the location of the hardware. What I am trying to do is to write a formula that generatesHETTICH IQ CAB
have an option to select Hettich IQ units and mark back of doors for mountingJoining Tables in Report Designer
Hi all, I'm trying to modify the Product Summary report so I can access the prompts for each product, yet I only want one line for each product. Does anyone know the simplest way to achieve this or have any tips? I think the best solution would be toOPTION FOR DW HOLE CUT OUT IN BASE UNITS
Have an option to make DW Service hole in the base and end of a base CabinetLibrary Designer product prompts different to products prompts
I thought I had the Library Designer figured out but I can't seem to get all my changes to work. Some changes are merged and work fine however some have only changed in the Library Designer and not in the actual Cabinets Products Prompts. Any help wouldFEATURE REQUEST - Add 3D Elevation Tokens
We would like to see 3D Elevation Tokens that work in much the same way as 2D plan tokens, drawing automatically when you draw your 3D product. This way, once we have the 3D products in, you could have viewports set up to automatically show the layers you want in each view and create your elevations without having to use the "Draw 2D Elevation" button. We could use this for products regardless of if they associate to a wall or not, including our custom millwork walls.update viewbase in layout
Gday is there a way to update my layouts when i have made changes to all the cabinets/walls associated with a viewbase? ie- i changed a wall length and the assciated cabinets. my layouts just show red squares where the view used to be. if i click on it1 Door Products, No Swing Prompt - With solution
I am setting up Microvellum Foundation Library 24.0221. I am new to the Foundation Library. I have been using MV since about 2005. The Base 1 Door product (and similar products) and the Upper 1 Door product do not give you a prompt for the door swing.Grain Direction in Designs
I have attached a quick design of a benchtop & Shelves with timber grain added and you can see that the waterfall legs have the grain running vertically, but the top has the grain running fron to back instead of left to right. This also happens as perCan you update your drawing template once a project is created?
Is this possible? I have made changes to our drawing template and want past projects to inherit those properties.Lookup table for section cad blocks?
I am designing a display case and I am using a lookup table to determine the shelf depth based on the overall depth of the display case. I need to figure out how to draw the appropriate cross section for the shelf supports (KV 180) based on the depthHatched return
Can the hatch return be added to cabinets. If so can it be a suggestion for a library update?Missing Variables G!Buyout_File_Drawers and W!Buyout_File_Drawers
I am setting up the Foundation Library. I found a Variable that is referenced in the products. But, does not exist in the Global or Wizard. I created it in both places. So, I am good there. Here is my question. Where does this kind of discussion existFEATURE REQUEST: Updated Product Prompts UI
This may be wishful thinking, but I think an update to the Product Prompts, similar to the image below would be extremely helpful. I would also like to see the added functionality of being able to access the drawing while the prompts window is open. Pretty2D/Section Text Height
Anybody else started having an issue with the text drawn on 2d/sections only coming in with a height of 1 since a recent update? It's definitely not a text style issue or the like, going back to a project from before the update and redrawing a cabinetCountertop width dimensions - Elevation View
Need some help here. I am trying to locate where the dimension is coming from in this countertop elevation view as seen below: I simply want to get rid of it in the elevation and cannot find it. I have looked in my drawing tokens and as well as in editLooking for MV Drafters - Melbourne Australia
Melwood Joinery in Braeside Vic are looking for a full time drafter with MV experience. We manufacture joinery for commercial projects across education, aged care, office fit-out, infrastructure and community housing sectors. Plenty of work in the pipelineHardware to be drawn on a different layer
Is there a way to set certain hardware in the product to be drawn on a different layer than a default one 3D_HWR?Possible to change PLINE or LINE widths in spreadsheets?
I doesn't appear to be on the drawing tokens as an option. I have set the layer lineweights and VP linewieghts to try and reflect these changes but it seems that anything over .6mm is not really making a difference. Just not getting the results I am seekingEdge top and bottom of sides globally
Morning, I would like my upper cabinets to come into the drawing with the top and bottom of the carcass side edged every time. I.E. Not have to do this manually as I have in the attachment. Had a good look around but cant find where to set it up. AnyProduct showing in wrong room
Hi, I have created 2 rooms, finished drawing in both, opened them up several times since initially drawing over the last fortnight without issue. Today I opened them up and found all the cabinetry, walls and annotations of room 2 showing in room 1, alongTwo rooms in one project with different base cabinet heights
I have set up a sample project with tow rooms. One is a kitchen the other a vanity. I want to set up different base cabinet heights for each room. Tried setting up two spec groups, selecting one spec group, project wizard, project setup, cabinet sizeLTSCALE is wrong for some reason...
The scaling on the dashed lines are showing as solid lines. Well actually, you have to zoom in super far and they are there. I change the scaling (which is always at 1) to .25, .5, 1, 12, 24, etc but it is still not what it should be. How can I fix this?Foundation Library Hardware not showing up in 3d
Hello, I am creating my own custom products and I am the stage where I need to add some hardware blocks to my drawings. I am doing it the easy way, thru the Hardware Tab in Part Properties. I added some hardware from the library but it does not show upLock Dado and Regular Dado Same Cabinet
We fabricate all our cabinets using dado construction. For upper cabinets we Lock Dado the bottom only but use a regular dado for all other joints. The component library had the flexibility to allow us to do that. I could specify dado for the overallRecover a deleted project
A project was deleted when importing a project with the same name. There were some rooms I needed from the deleted one. Is it possible to recover the whole project that was deleted earlier today?Solid Modeling Tools - Extruded Tools
When I create a 3D product with Solid Modeling Tools (SMT), I noticed that some SMT tools do not modify the product permanently. For example, I want to stretch a part (entity), there is a tool for that in the Extruded Tools window under Extruded Entities.Long time user with some bad habits, Looking for advice
Im a long time microvellum user who is trying to upgrade and train a new employee at the same time. I have been with my company for about 20 years and have been the main programmer for our CNC and panel saw for all of that time. I use a mix of MicrovellumNext Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: