Change material thickness
What's the easiest way to change a material's thickness at the project level? I thought I could change the value in column B of the SheetStockLibrary tab in Workbook Designer, but it doesn't save when I exit Toolbox. Shouldn't this save? Do you have to1 file per job
For you guys that use 1 file and put all of your rooms in it https://www.youtube.com/watch?v=TOlIvcmrUFcSeparating FE's machining from Unfinished Sides machining.
We're running Imperial Component Library and I'm trying to separate the machining on my FE's to be doweled and the other Unfinished side to be screws. we have a limited Horizontal dowel machine and I can't bore both edges on my parts because of the spacing.Importing projects with XML files
Good day, We have been using XML importing for almost two years and it is fantastic. I wish we could import to the Wizard or Global sheet but since that functionality is not available, I am planning to add dozens of variables to what we already includeADA Sink Angled Frame With Hinges
Has anyone used hinges in place of Keku?blum movento or any woodboxes
Hey all hope you all doing well. i have a question for a movento woodbox i want to use screws for construction but when the box hieght is small say 100mm i dont want 2 holes on the back or front to be so close to each other is their a way if the drawerNew Toolbox Release Available Today: Build 24.1.0503.641
We are happy to announce that Toolbox build 24.1.0503.641 is now available! This build includes resolutions for issues with 3D representation of corner cabinets, routing depth with 900 PTP tools, and nesting optimization. Please refer to the completeLock strikes
Hello I need some help, running foundation library 23_1010, in the material wizard, are the lock strikes that are listed under partition strike used for the cabinets also? If not where do i find the strikes for cabinets? How do i add machining tokensHelp making formula work with nested subassemblies
I use this formula to control if the door/drawer front gets a flat panel or not. When I have doors/drawers that are nested sub-assemblies it fails to work correctly. What needs to be added so that it will function correctly? =IF(W!Use_Flat_Panel=1,"Fixed shelfs
Hello Team Would their be any chance of getting tall cabinets fixed shelfs to have led option and also angled option with front lips? last couple of months / years lots of clients want leds above wardrobe rails etc and angle shelfs for shoesWhat are you building today?
Hello MV Community! I was browsing through the community posts tonight and started thinking about the thousands of people plugged into Toolbox or another component of the Microvellum platform at this very moment. And I thought, I wonder what sort of productsHinge and Pull Stile WIdth Override Slight Mistake (Foundation 24.0322)
Looking at Foundation 24.0322 (Most Recent) the formula for these are usually always pointing to the drawer column in the door look up table because its asking: AND(Bay_Position<59,Bay_Position<67), Just needs to change to AND(Bay_Position>59,Bay_Position<67)Blum pocket door
hey all is microvellum going to add the blum pocket doors to the library?Boîte de commande ToolBox
Quelle est la commande pour faire apparaître la boîte de commande Tollbox? Merci .Unhandled exception
Anyone else get this error after working in program and then going into product prompts.Product Engineering Team Meetup - New Schedule
In response to recent feedback regarding our Product Engineering Team Meetup events, we have implemented some adjustments to the event schedule. While tomorrow's event, scheduled for May 2, 2024, will maintain its usual time at 1:00 PM Pacific Time, ourNew MVU Training Plan Now Available: Estimating & Project Costing
Are you using Toolbox to create estimates or generate project costing information? Need help getting started? We created a training plan, videos and a quiz to equip you with the skills and knowledge needed to effectively utilize Toolbox for estimating.New Toolbox Release Available Today: Build 24.1.0430.641
We are happy to announce that Toolbox build 24.1.0430.641 is now available! This build includes resolutions for issues with G-code file paths, and processing with multiple saws in a work order. Please refer to the complete Release Notes for more informationX indicator for edgetape
To prevent machining on the incorrect edge of a part, could an "X" or similar show up where there is an edgetape assisgned. Considering there is a yellow circle for the machining point, I assume my request is posssible. I've drawn in the red "X" belowNew Foundation Library Release Available Now: Build 24.0419
We are happy to announce that a new update for the Foundation Library, Build 24.0419 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, updates to existing products to improve functionality,Drawer stack bottom recess for the Foundation Library
There is an option in the Component Library for a drawer stack bottom recess where it lowers the bottom of the drawer cabinet behind the toe kick face. I use this often to get more space for file drawers. Is there an option for this in the Foundationadding the daisy catch
I would like the daisy catch added to the finished face for use in corner units. It's a very simple piece of plastic that stops corner doors from sagging.Saving Sub assembly
Has the issue with saving a subassembly been resolved in the later updates? I am still using database explorer to change out a sub assembly for a newer modified one as the save to library and overwrite existing sometimes works but most times not. HasWhat happened to my bay calculator?
Hey all, Working on a modified of the Foundations Library Master Straight Designer Cabinet. Somewhere in my work I've managed to remove(?) the bay calculator. It no longer shows up on the right click in the product prompts and doesn't show up in the propertiesCabinet in foundation library
Hello does anyone know the name of this cabinet in the foundation library? We can't find it anywhere so thanks for any help.Serial number removal from system
How do I go about removing the current serial number from my installation? I am having issues with contacting the original owner of the seat that I have installed.Full Tops option Global on Library and projects specifications groups in RED and won't let me check box
I'm trying to select the full top option on my project specifications groups and it appears in RED and it doesn't let me check the box. Why is it like this and how do I get it to work? I attached a snippet.Bluebeam alternatives
any other pdf software that allow you to mark things up that are cheaper than Bluebeam? They just raised prices againCreating report for a specific material only
Hi, We would like to run a report where only parts to a selected material are processed, is this possible? It's required for a take off to a certain material in the project. I can see in the processing center, you can load parts to the selected materials,Face 6 axis direction single parts
When drilling face 6 single parts after sheet nesting,,,, is there a way to control which axis it flips the part, what im looking for is "longest edge on the x" type of control. hope this makes senseDim Sting From Wall
Where do I find an explanation for the 4 Dim Strings. I do understand that they most likely are prompts for drawing the 3D wall in Plan and Elevation. I have made a change to the wall width Dim being place off the wall 6" instead of the 26" (thanks toSeeking Employment
Feel free to reach out if anyone is open to a remote or hybrid submittal engineer. https://www.linkedin.com/in/leepellegrin/How to Lock a Library
I have googled the Tittle and no luck. I viewed a few Videos on creating a Library and they mention Locking the Library. Any input is appreciated and thanks in advance.Setting up a Library
I am wondering how others handle wanting to create two different scenarios one for "Institutional/ADA" compliance and for "Residential". What is the best alternative to accomplish this? Thanks in advance for the input!!OEM 2023 tools palette limitation?
I'm trying to create a 3rd group under my tools palette group and its not letting me drag and drop the blocks into the 3rd group for whatever reason. I had some issues and had to restart to get the other groups to work correctly but those worked finecustom global variable: =G!Dim_To_First_Drw_Slide_Hole
In the component library v050.7, the system drawer slide locations are pretty much hard-wired to the bore templates. (ie 35mm, 128mm etc for the 5mm slide mounting holes.) This leaves the drawer slides dead flush to the cabinet face, without any optionEdge band front edges with same color as exterior finish
Build 23.1.1219.641 Foundation 24.0322 How do you set the edge banding on the front edges of cabinet tops, bottoms, sides and shelves to match an exterior edge banding color? We edge band our boxes with the same color as the interior material color exceptMicrovellum Toolbox 2022 OEM (Cabinet Dimensions)
Hi there, How to turn on / off the dimension in cabinets just by itself (2D & 3D) The dimension in the cabinet seems to be one block or group. I’m trying to select just the dimension and it would select the cabinet box as well. Thank you, EderwinNew Toolbox Release Available Today: Build 24.1.0416.641
We are happy to announce that Toolbox build 24.1.0416.641 is now available! This build includes resolutions for issues with Maestro Toolfile label generation, XML file conversion, and product calculation. A new saw type has been added, and new hiddenadding bins to foundation library
hey all anyone know how to add waste bins to the foundation library we use to have lincoln sentry bin in the old library but ever since we updated to foundation its gone not sure if its Australia issue.Next Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Toolbox 2025 Now Available
We are happy to announce that Toolbox OEM 2025 is now available! To discover the new features and abilities of Toolbox 2025 check out What's New in Toolbox 2025 (OEM). For help installing Toolbox 2025 please visit Installing Toolbox for a simple overviewNew Toolbox Release Available Today: Build 25.1.0213.641
We are happy to announce that Toolbox build 25.1.0213.641 is now available! This build includes resolutions for issues with stay-down nesting, adding 3 new options to the nest settings to address them, as well as an improvement for Drawing Products inNew Toolbox Release Available Today: Build 25.1.0129.641
We are happy to announce that Toolbox build 25.1.0129.641 is now available! This build includes resolutions for a variety of issues with the Solid Model Analyzer, as well as a few additions to the analyzation settings. Please refer to the complete ReleaseBlum MERIVOBOX Drawer System Add-on Now Available for the Foundation Library
The new Blum MERIVOBOX Drawer System is now available for Microvellum’s Foundation Library. To obtain the new drawer, click here to download just the drawer system and use the Database Management tool to import. Otherwise, you can use the library update2024-2025 Product Engineering Updates
Here you will find a catalog of the Product Engineering Update Review recordings for 2024-2025. These hour-long meetings, hosted live at the end of every month, feature Microvellum's Product Engineering Team reviewing the latest changes and improvements
Follow us on: