How to modify this formula?
I want to modify this original formula, which sets a Toekick recess. =IF(AND(Flush_Toekick=1,Toekick_Back=0),0,IF(Toekick_Drawer=1,G!Toe_Kick_Drawer_Back_Set,G!Base_Assembly_Back_Set)) I want it to include, if the model name starts with either "H" orHardware (Adj Leg Plates) are Spinning Differently
I've got an odd problem if someone can point me in the right direction. We need build up parts in our face frame adj leg subassembly. It looks good without the build up for the legs, the adj leg plate hardware points to the outside of the cabinet //ThisGlobal for drawer runner weight rating
Would be great to have a global to set a default 'choice' for the drawer runner weight rating. E.g. Blum Merivobox 40kg or 70kg. I generally make all runners the higher as default (currently I'm changing in workbook designer 'LookupTableRunnerHolePositions2'New Foundation Library Release Available Today: Build 24.0823
We are happy to announce that a new update for the Foundation Library, Build 24.0823 is now available! The latest release of Microvellum's Foundation Library includes updates to existing products to improve functionality, a multitude of quality of lifeFoundations Library and Custom Products
Please bear with me as we are in the process of implementing the new library and have some questions. If we take a "standard" cabinet from the new library and customize it and then save it as a new product to our library, will it be overwritten when weLadder Style Toe Kick
I am trying to add a DIM Token for "Toe Kick Space". Cant figure out how to add the "Thickness Door" to the formula. I am using the W!Door_To_Cabinet_Gap Prompt and it works as you see in the Screen Shot. I was able to add the prompt in W!: However theBlind Corner Cabinet Inset Blind Panel
We are using the new Microvellum Library and currently drawing a blind corner cabinet and can't seem to locate the option to inset the blind panel and notch the top and bottom of the cabinet. In our older Microvellum Library we had the option to select"E!"&MYCATEGORY(ProductCode)&"_Bottom_Edges_Unfinished"))
Library Foundation - 24.0722 Anyone know how this "Upper_Bottom_Edges_Unfinished is triggered. I have a pointer set but can't seem to find a global or local prompt that turns it on....Solid Modeling Machinng
So recently started using Solid Modeling for some Nurse stations and when it creates the product it is not routing completely through on the extruded parts. Using some 18mm ply and we have it at .709" in the material file and fix the parts on the screenChange Materials Render Interface
Hey everyone, I'm wondering if anyone has experience with this, or if there is documentation I'm missing on the knowledge base. I'm wondering particularly where the settings get save, if it is in the Microvellum Settings that can be exported, or if itsIs it possible for the error messages that you get when creating a work order to end up printed on a report?
We have several warning messages inside our products and subs. The ones in the subs don't show up until processing (which is not ideal but we can work with it). There are times (whether accidental or on purpose) that these error messages get ignoredwhere to find lookuptable for striplighting
Hey all im trying to find this lookup table to change the distance from front edge can someone guide me in the right direction. =VLOOKUP(Strip_Lighting_Options,LookupTableStripLighting,7,FALSE) many thanksNew Toolbox Release Available Today: Build 24.1.0815.641
We are happy to announce that Toolbox build 24.1.0815.641 is now available! This build includes resolutions for issues with drawer box heights, dynamic hardware image scaling, parts dropping from certain work orders, and more. Please refer to the completeErrors opening Workbook Designer get_Title()
Lately when I open workbook designer (Usually every other time) I get this popping up. Anyone know what could be causing it? I just close and reopen it, and it loads in just fine the second time. Thanks, -JamesSmall Part Labelling
We are currently using a 3"x4" size label on our nesting machine with auto labeler. We have some small parts like nailers and drawer box backs that are too small for the label and we're getting errors on the machine controller. Without going to a smallerMid-Stile Overlays are not being taken into account when calculating Drawer Front Widths.
Example: 2 Door 2 Drawer Base FF Library: Component 50.3 / 50.7 Library: Foundation 24.0722 The issue we are having is with the Drawer Front Left/Right Mid-Stile Overlays. For example, when using a 2 Door 2 Drawer Base FF cabinet, the default is thatCreating Cabinet Subassemblies for Stacked Cabinets
I'm using the Foundation library and rather than using a Split cabinet or Product Groups, is there a way I can create stacked cabinets under a single product? Is there a way to create my own library of cabinets as subassemblies which in turn I can useDrawer Back and Bottom Drilling Turn Off
In the Foundation library, is there an easy way to turn off the Drawer Back and Drawer Bottom machine token drilling from say a Global or Sub-Assembly level?Foundation 24.0722 Imperial Decorative Lam. M Table Typo
Hi, Just found this, its not allowing materials 10 or 11 to have a grain direction option. The 5 Should be a 1 (Check Box) and the 1 should become a 5 (Drop down list) Thanks, -JamesTechnical Support
What is a normal turnaround time for a technical support issue? Our program has been freezing up all day and we need support as we've tried everything within our capacities to remediate and submitted a ticket this morning and still haven't gotten a response.paste
need to know why when some of our stations can paste 2d geometry into MV and others paste in as an OLE object?Different color edge banding for front edges
Foundation 24.0607 Is there a Global or prompt that will change the shelf front edge banding and/or carcass front edge banding independently? The prompt "Finish left/right end" changes both the carcass material as well as the edge banding. We often edgeBase Cabinets Accessories - Base Scribe Filler With Cleats
Library Foundation - 24.0722 Been caught out with this one.... Changing the prompt width to say 50mm & Dado - the filler options - RH works fine but the LH throws the dado route off.... RH OK LH IssueAdding formula to 2D instructions for all products
I would like all Upper Product to display Dims, as shown, in all Cross Sections. How is this accomplished in "Foundation" 2D (Drawing) Instructions? Is "Library Designer" or "Database Explorer" used?Defining two sets of small parts
Is there a way of defining 2 sets of small parts, one that would cut the onion skin and one that would leave the onion skin? We want to be able to onion skin larger small parts and then with smaller small parts send them over to the trim routers but weSecond machining operation to be apart of first machine operation?
Hi everyone, Title is pretty self explanatory, for shadowline finger pull details for example, microvellum adds a second operation to do this detail where it could just do it on the first operation. Is it possible for microvellum to do the second op asMV Random Window Locations
I'm in MV clicking a button that opens a new window. The window opens on random screens/monitors. Is there a setting that tells MV to open a new window on the same screen/monitor that MV is open on? Or to open at its last location. There is a Windowslabel help
Can someone please tell me the path to pull in the work order name on my label. Is it listed under Opt-results. I can find the batch name but not the WO name. johnMV Profile Door
This one is to Library development team. MV Profile Door Sub has no pointers Columns W, X, Y & Z. I use pointers for 2 pack painted doors with a L/m value against it & a thickness of .001. This then carries into the quote/costing calcualtions. At theFace Frame (Multi Bay) Subassembly Qty Formulas are Slightly Off
There isn't really anything too broken, its just asking for =IF(Bay_1_Face_Options<>"No Doors",1,0) While it should be asking for =IF(Bay_1_Face_Options="No Door",0,1) The No Doors causes a problem because F Table is giving the drop down selection asUpdate MT from template is broken
Could someone familiar with this tool check to see if it still works. Was working great last I remembered, now it won't update any of my project level tokens to match the template. No changes. I've been copying and pasting the tokens through the spreadsheetCopy modified Product to "Library Designer"
I remember seeing this explained in a video. I modified and saved a new product. It does not show up in "Library Designer". Will someone refresh my memory.Adding In-Wall Brackets
I'm trying to add A&M In-Wall Brackets to the foundation in spreadsheet and can't figure out how. I see that all of the brackets show up in spreadsheet "L" in Lookuptable, but somehow they are formula driven (=RANGETOSTRING(LookupTableBrackets,"|")? IMirrored Value in subassemblies
Has anyone successfully managed to use the Mirrored Value column in the subassemblies? At the product level it works perfectly but when it is in the subassembly this column is completely ignored by the MVMIRROR command.Cross Section Text
I would like this text to be centered on the depth. Is it possible to do and what might the formula look like?lead in and lead out very visible on one material border, how can we improve it?
Hi, We have one compact material, it is very hard. If using compression tool, when machine border line, it is burning. So we switch to another tool recommend by tool company, we use 2 pass to cut 0.5" thk material. But after that the lead in and leadRamp in, Ramp out
Would it be possible to alter the ramp in, ramp out feature? At present when geometry is added to a nest, which happens quite frequently and a toolpath is applied you have to change to route editing tools and add a lead in and then go back and add theHelp with this formula. #Value error?
Hoping someone can help me with this. I think the formula would work if as long as I got everything in the right places. I just don't know if the VLOOKUP(if true) can be combined with the IF statement after it. The false would be the G!Base_Bot_Rail_Width.Interior Cabinet Tray Dividers - Removable - Cut Parts
Does anyone have or use an Interior Cabinet Tray Dividers that are cut parts and are routed in as well as removable for sorting baking trays inside a cabinet? We are currently using a Component Library, but I know we would do the same in the future withValance Dimension Height Formula for section views
I have added a dim in "part properties" for showing the height of the valance. The problem with the Dim formula that I added is: If I have a cabinet with no valance it shows 0". How do I write a formula to turn off the Dim when there is no valance? AnyNext Page
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 26.1.0422.641
We are happy to announce that Microvellum build 26.1.0422.641 is now available! This build includes resolutions for issues with product dimensioning, associative machining, grid view within the processing center, sawing reports, and more. A new optimizationNew Microvellum Release Available Today: Build 26.1.0529.641
We are happy to announce that Microvellum build 26.1.0529.641 is now available! This build includes resolutions for issues with docking sizes, the formula editor, sawing G-code, and more. Please refer to the complete Release Notes for more informationNew Foundation Library Release Available Now: Build 26.0527
We are happy to announce that a new update for the Foundation Library, build 26.0527 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Now: Build 26.1.0520.641
We are happy to announce that Microvellum build 26.1.0520.641 is now available! This build includes resolutions for issues with room names, the find and replace feature within Workbook Designer, item number scaling, and more. A new option has been addedWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: