Legra Box Drawer
Hi, I have drawn up a kithcen full ove legrbo drawer, I have never usd these drawers before,. My boss decided to change all the drawers drom 500 to 550. Now wher or how the hell do I creat 550 legrabox, at the moment I am enjoying an afternooon of playinProduct weight
Is there a way to set weights to specific materials or hardware to establish the total weight of a given product. We need a way to present this to clients per product. There is a weight prompt in the products but it's empty. I've also found GlobalMicrovellum Community Book Club
What's up everyone! This is something that has been on my mind for quite a while; and after our Showcase event with Bruce Humphrey and some discussions that followed after that event, we thought it would be cool to create a Microvellum Community bookConstruction Method for Toe Kick Box Assembly
Hi There, Is there a setting to get dado joints for all the parts of the toe kick box base ? So sleepers at sides, toe kicks at front and cleats at top all have dado. Thank you.Position Available. Hamilton, New Zealand
Montage Kitchens & Joinery is a well-established Joinery business in Hamilton. We are seeking a self-motivated, proactive, and organized CAD Draughtsman/Draughtswoman experienced in Microvellum. · Use Microvellum Toolbox to provide and maintainReport Groups
Hi Is the option to Setup Report Group work? Whenever i it, i get a error message after clicking the ''Add'' Thank younesting optimization
Hello, When using the foundation library, I'm not sure what I have turned off or on in the settings but during processing, all the different materials have complied into the one composite.dwg file rather than under each individual material file nameColor Code Materials?
Is there an easy way to tell different materials on a single product/or across different products in the same job in the model space? I just have an idea that if different materials can show different colors in the model space, it would make it easierMicrovellum Data Dictionary
Hello Microvellum Community! I wanted to share with you a very important resource available on the MV Knowledge Base. The Microvellum Data Dictionary is a detailed reference of the data structures used by Microvellum. It contains report table definitionsProblem With Solid Modeling Tools
I have encountered a new problem with SMT and am hoping someone can help. I would like the inner rib of the diewall (purple part in attached image) to be mortised for the studs. I have the stud extended into the rib 1/4" in the profile the same as I wouldGet multiple labels for the same P2P Part (after optimization)
We have an individual part label set-up to print for a specified processing station, selected from a list. It works very well except I can't seem to figure out how to get the label quantity right. Since I am using the OptimizationResults table all theDowel Timber Legs
Hi all, is there a product anywhere that is a simple dowel leg? I've found overly decorative turned ones, but no simple posts. Looking to use for banquette seat legs and open shelving unit support beams. Typically working with 35mm diamter oak, and wouldProducts to follow curves?
Can anyone link me to a tutorial to have open base cabinets follow a S curve? I have briefly looked but seem to be coming up short. I am looking to get open book shelf bases, sitting back to back and multiple "sets" to follow a S curve. The products willNeed an "Are You Sure" pop-up when deleting material categories
I right-clicked and tried to rename a material category, but accidentally clicked "Delete" instead. It automatically deleted the whole folder. My materials still appear to be in the spreadsheet, so I just have to figure out how to get them back in theBarcode scanner
We have an Optimat ABD 050 horizontal drilling/doweling machine. Soon, we are taking delivery of a Homag Centateq N-300 512 V7 push off CNC machining center. We've never done barcoding before but I think it will be important to do so with this setup.Bi Fold Pocket Doors
Hi there I'm trying to build up a Laundry Unit with Bi-Fold Pocket Doors in the cabinet. I need ot to be full width without mullions. Does the new foundation library allow me to do this, i tried the Tall Master but couldn't see how to add them. LookingUnderstair Units
Hi there, new to Microvellum and trying to get my head around how it all works. I have installed the new Foundation Library and am looking for the easiest way to replicate the 1 door and 2 door under stair units from the AU Premium Library. Also tryingFeature request - Foundation Library - More Location Control for tab pulls/handles/knobs
We've come across projects that require tab pulls/handles/knobs that needed to be centered either horizontally or vertically on drawer and or door faces. The current process for relocating an tab pull/handle/knob is less than prefect. It would be greatWhat's your construction method for nested based manufacturing?
We'll soon be implementing Microvellum to a new user in the UK and they've asked for guidance on best construction method for nested based manufacturing. I'm interested to hear from the community what your preferred construction method is? Screws DadoMaking 2D section live
When we updated to OEM2021 we lost the ability to access product prompts and part properties by clicking on the sections? Is there a setting I can't find to make this happen?Parametric Bulge List
I writing parametric PLINE routes that need to have a radius at each corner (Sink Cutout). I've created prompts so I can calculate my bulge at the vectors, but I don't know how to use that prompt in my Bulge list to make it parametric. I looked in formulaRenaming a Room
Has anyone else noticed that using the "Rename Room" command only changes the room name in the Room Tree? The actual AutoCAD drawing for that room does not get renamed.Anyone cutting Solid Surface on a Nested CNC?
We are looking into the option of starting to cut Countertop blanks and shapes out on our Nested CNC. I am wondering if anyone else is already doing this and could give us some pointers and tips. We already have the basic setup running and were ableFoundation Library
Hi all, I have been setting up the foundation library with my own drawing template that I have used with 2020 library with no issues. For some reason, in the foundation library, all my cabinets are coming out with one colour. Anyone else has had a similarMV product
Has anyone had an issue with having too many products in their library? The reason why I'm asking is because my company has a few product lines they want in MV. That way Engineers can pick a product from a list and draw it in MV. Over time this list couldPaperless?
Has anyone gone paperless as in not printing out cutting reports and nest layouts but rather creating pdf's to be viewed at the machines or assembly workstations? If so what were the hurdles? Learning curve on the floor? ThanksFoundation Library Buyout Doors
Hi All, Question for those using the foundation library, or someone from microvellum. Might be a stupid question, or I'm completely blind. Messing around with the foundation library, getting it ready for implementation, cannot for the life of me figureCreating a New Drawer Box System
Are there any instructions or procedures for creating a new drawer box system? Like here for Adding New Drawer Slide https://community.microvellum.com/portal/en/kb/articles/adding-a-new-drawer-slide We are looking to utilize Hafele Matrix Drawer Set System.2_D Wall Dimensions
G,Day. I have found that I can draw walls using the Draw Cross Section Tool (Cross Section,Plan Section,Elevation Section) and I Have added some 2_D dimensions in the spread sheet as you do with units. With units I just save back to the library with theMMenu Display
Hi, I'm having issues with pop-up menus not fully displaying. The menu is fixed and can't be extended horizontally or vertically. Appreciate your input in finding a solution.Copied Rooms Gives Errors
Does anyone else get errors with copied rooms in the same project as the original. I use the Copy Room command to make a copy of the room. The error I usually get is "Index was outside the bounds of the array." I am using Microvellum 2019 with BuildWe need different wall types
We all draw islands, and it's always easiest to draw the elevations using the "draw wall" command, but the wall in the floorplan shows a solid wall. It needs to show a dashed line to properly display on the floorplan. We should have a new wall typeMV box labels
I need a box label to make 4 label per product. So if there is 1 product with a quantity of 5, I would need report designer to make 20 labels for that product. How can I accomplish this using report designer?FEATURE REQUEST - Ability to highlight cells in edit design data spreadsheets
I saw it mentioned in reference to updating new libraries that it would be a good idea to possibly highlight the cells that you updated with new formulas etc. Taking it one step further I think it would be great if we had the ability to highlight cellsPlotting blue
In yesterday's live training session for Submittal drawings this issue was touched on, but I didn't catch where to make the change. I noted Plan View> Legacy Hidden = removes color. Where do I need to be to make this selection to remove the blue color from my plots?Microvellum dimensioning
Hi there, Is anyone able to let me know how to turn off the multiple dimenions in MV. Thanks in Advance.Seeking an onsite Microvellum Engineer/Draftsperson
Architectural Millwork Company seeks an Onsite Experienced Draftsperson/Engineer. Experience in high end residential cabinet/millwork construction is preferred. Experience in Microvellum, AutoCad, MasterCAM, Autodesk Inventor, will be a plus. Please emailEdgebander Pre-Mill
We have always run pre-mill heads on our edgebanders. Recently we had a job where edgebanded parts were out of square which we have isolated to the edgebander. We are open to changing our process for pre-mill and not using it on a regular basis. We haveToe Kick cutout.
Hello everybody. The toe kick notch on cabinet sides are being pocketed instead of being cut as part of a border without us making any changes (see attached file). Is this change update related? We are running 21.1.714.641. How can we fix this issue?Showcase Event: Planning Your Growth with the Right Technology
Join us For our Next Showcase Event Is your company experiencing growing pains? Do you feel you are too small to invest in technology or have already invested too much? For some, realizing it's time to make a change can be difficult. Steve Jobs once said,Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnNew Microvellum Release Available Today: Build 25.2.0114.641
We are happy to announce that Toolbox build 25.2.0114.641 is now available! This build includes resolutions for issues with the Processing Center, saw trim values, label output file paths, and more. Additionally, in accordance with Microvellum's new subscriptionWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: