Plugins For BSB
Where do we stand with plugins for Brics? They have one called communicator which allows for more 3d file types. I need an account with them to download it and dont have one that has a copy of the software attached to it, and when i try install the pluginArticle Save button?
Team, Can we get a SAVE button to save articles for later? Who says yes?Toolbox AC for AutoCAD 2026 ??
Any update on Toolbox AC officially supporting AutoCAD 2026?Removing notched corners in drawer bottoms
We recently switched to the Foundation Library from the Component Library. Or standard drawer construction is dowel with captured bottom. The sides had stop dados and the front and back had dados that ran past the ends. The bottoms would be cut with squareBSB Panels and Ribbons
Got an issue that is making me pull my hair out. Currently using the Drafting workspace. I got used to the ribbon along the top of the screen. When ever I would pull up an object properties it would open the properties panel and I would put it on thesetting up formula materials and having issues
ok I've been working on setting up a wizard with formula driven materials. everything seems to be working but seems strange that the material still shows in the OG formula output in the material Database name. the material name in the material info isBuild Request: Toolbox OEM 25.1.0616.641
Greetings Everyone! :) We were hoping to get our hands on the last build for Toolbox OEM since Bricscad BSB subscription has been launched. Since the autocad licence ended, MV is unable to provide this update as the deadline has passed.. Would someoneExploded cabinets??
Hello... Not sure what happen or what I am doing wrong. All of my cabinets in this big project I have going on have gone into exploded mode / selection. When I click on a cabinet it doesn't select the entire cabinet. If I want to see product prompts andHardware Machining Holes
Is there a way to update / change the holes that are created by this drawer spacer? The hardware part is Blum Tandem Slide Spacer. I don't see any parameters to change the holes in the design data. I can't make any changes to the holes in "draw part in1 Drawer Cabinet - Front marked as "Door" or "Panel", not "Drawer" (grain direction issue)
I have been reviewing my doors and drawer fronts. All 1 Drawer cabinets, the fronts are hardcoded as a Bottom Drawer Front. This is an issue for ordering 5-piece fronts since this looks more like a door front, and we would want the panel grain to runreports
hi, does anybody have a sample hardware report they would be willing to share? At square 1, just looking for something to import to get going that's more than the original from MV install. Thanks!Foundation Library - Dowel Spacing
Is there a setting in the foundation library like the legacy (component) library to switch from small dowel spacing to large dowel spacing. As currently in our legacy library we use 96mm dowel spacing on our base cabinets and 64mm spacing on our upper5 Piece door is showing gaps between rails and stiles
There is a gap between rails and stiles on a 5 piece door The tongue length measures at 0.5" (needs to be 0.375") . Which is causing the overall rail length to be 0.25" short In the "S" workbook, the tongue length is set to 0.375". If I change it to 0.5"Choice: Toolbox AC or Toolbox BSB
Hi Community, It's been 3 months since BSB launched, and I have put a lot of detailed feedback and done massive search regarding whether we can transition our team's heavy muscle drafting memory from AutoCAD to BricsCAD, and we are still struggling, asWork Orders Summary with Face Frame cabinets
I just used the face frame category for the first time . Everything seemed fine until I processed the cabinets and looked at the work order summary. The width shows the inside dimension of the cabinet not the overall width. when the PM and I were lookingAbility For .mprx CNC Output
Adding ability to produce .mprx files in G-code to keep up with newer WoodWOP versions. Gives operators better variable support and data manipulation in components vs the .mpr output.Cross Section Wall
I would like to turn of the Cross Section Wall. However, turning off the 2D_Section Layer, will hide all Geometry. What "Prompt" controls the Layer for the Section Wall.Hinge Bore Visible Through Faces in Conceptual
Why is this happening? We have a client that wants a more Cabinet Vision/Mozaik look, but the hinge bores are visible through the faces. Even if I turn off the hardware layer, the hinge bores are still visible in the Conceptual Visual Style. This is withVauth Sagel Bins
Hi @Lenny Scianna, Do you know if the Vauth sagel range of bins (VS ENVI SPACE) are planned for library development in the near future? I was going to create our own but thought it would be worth checking Thanks!Parts Excluded from Optimization
Using multiple sheet sizes of a certain material we sometimes get an error 'there is not enough material' for a given material when processing. We can usually resolve the error by adjusting sheet quantities and optimization priorities using the ModifyDRAWING ONLY OPENS "READ ONLY"
I was working on a room when toolbox closed unexpectedly. When I tried to reopen it, it would only let me open as read only. How do I open it so I can finish editing it? I have tried to restart toolbox but that didn't help. And no one else has the drawingCurrent Microvellum Layers
Is there a KB Article or Library Release update explaining the purpose of the added layersA Guide on How to Best Transfer Globals to a New Install
I think it would be really helpful if Microvellum produced a guide that walks through best practices to move all of our globals to a fresh install. If any users have suggestions, I'm all ears.New Microvellum on BricsCAD User - Challenges with AutoCAD-centric Training
Hello everyone, I'm a new user working with Microvellum on BricsCAD, and I'm finding the official training videos, particularly those in the "Plan to Production" playlist, challenging to follow. The videos are great, but they're demonstrated in an AutoCADDowel Machining on Stretchers/Rails - Machining from Back Edge instead of Front?
I our old Legacy Library the rear stretcher machines from the back edge instead of the front edge, and in the Foundation Library it currently machines from the front edge. Is there a way to change this in the Foundation Library so the rear stretcher machinesDrill bit "Type Info"
Right now our CNC's have 5mm brad tip bits installed. In my other CNC's at other companies we opted for V-tip bits so we could drill for pulls without blowing out the front faces of the doors. I don't recall this 'Type Info' setting in those tool files“Hinge plate offset from side” is incorrectly using the “Hinge distance from side” value as the plate’s distance from the door edge. (for blind corner hinges)
There’s an issue with the blind corner hinge plates. The “Hinge plate offset from side” prompt is tied to a lookup table value that only references the hinge distance from the side (22.5), and the system then applies this in the opposite direction toADA SINK ANGLED FRAME
Ok, just did most recent update and ada sink 100% better. But . couple things first not biggy but no scribe option ,how can cabinet have no scribe. Bigger issue why still does panel not work like a face part /with false front. reveals and graining? iTemplate Time Stamp
Strange, I have a template with a date in the 1600's. Anyone else experience this? Wonder what life was like working with a computer in that Century.Cloud Enabled Workflows
--Was recently approached by a freelance drafting firm making the following claim: Although I've set up remote access via VPN, RDP, etc. in the past, this is the first I've heard of MV natively supporting it. Is there any truth to the above claim or isSelect Entire Product Broken
Every time i edit a viewbase drawing or something similar even though the "select entire product" is ticked, it does indeed not select entire drawing, until i re click, and select the unit. The real kicker is i have to do that per unit, during the same.mprx vs .mpr loading into WoodWOP
Anyone have experience with the .mprx format? We updated the tool file extension in the settings to .mprx, which changes the file, but produces an error when trying to load directly into WoodWOP. Just curious if anyone else has had this issue and figuredUsing Dynamic UCS (DUCS) When Adding Dimensions
We just published a new article that shows how to use Dynamic UCS (DUCS) in Toolbox BSB (BricsCAD) to place dimensions directly on 3D faces. If you’ve ever wished you could dimension a product without switching to a front view or side view first, thisDefault settings and Presspull on BSB
Hi everyone, I’m hoping someone can help me out. When I’m working with BSB, the value of VIEWRES defaults to 500. I’d like to set it permanently to 16000, but I can’t find any way to make that change stick. Every time I create a new room, it goes backFEATURE REQUEST - Project Specification Group In Use Message
When editing Project Spec. Groups it is possible for more then one engineer to have them open. This can cause the changes to be over written due to the caching of the data when the editor is opened. It would be nice for those of us that use SQL SeverRandomness, is it possible?
Is it possible through a formula to make grooves random distance between each other between a set space? the bottom prompt is the one i'm looking to change. I just want the ability for it to decide on random widths, as it if was random pieces of rusticFEATURE REQUEST: Ability to Adjust Door Overlay on Hinge Side Independently in FF Library
In the Face Frame Library, especially on the Master Horizontal Designer FF and the Master Multi Carcass Designer Cabinet, it would be great to be able to set the door overlay independently for the inside hinges and the out side hinges. The photo below2D Part Editor Menu
Is there a way to undock the menu so I can close it? one of my guys played around and I now cant access the close button, see attachedFOUNDATION ADA Sink Angled Frame - Bracket 3D Controls
For the life of me I cannot find where the 3D for the ADA Brackets is hiding within the prompts of the Foundation ADA Sink Frame. As in our Foundation Library the A&M Brackets draw in 3D just fine but the Rakks ADA Brackets do not draw at all in 3D. IToe Kick nesting
Does anyone know why the toe kick nesting notch now does this instead of just cutting a square out? It feels wasteful in nesting time, and I cannot find the setting to turn it off.Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Registration now open!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Toolbox Release Available Today: Build 25.1.1204.641
We are happy to announce that Toolbox build 25.1.1204.641 is now available! This build includes several new features added to enhance the usability of the Toolbox login and About Microvellum interface. Additionally, the "Rotate Parts In Nest" featureNew Toolbox Release Available Today: Build 25.1.1120.641
We are happy to announce that Toolbox build 25.1.1120.641 is now available! This build includes resolutions for issues with various parts of the interface, errors associated with redrawing products, copying data, and Microvellum's Beta Optimizer. PleaseNew Toolbox Release Available Today: Build 25.1.1107.641
We are happy to announce that Toolbox build 25.1.1107.641 is now available! This build includes resolutions for various issues with the Beta Optimizer, subassembly names and prompt values, extruded products, and more, as well as improvements to certainIntroducing the Next-Gen Optimizer: Now in Beta
We’re excited to introduce a new generation of optimization tools—now available in beta. This release marks a major step forward, featuring an all-new optimizer built from the ground up with a modern, flexible architecture and a powerful genetic algorithm.New Foundation Library Release Available Today: Build 25.1024
We are happy to announce that a new update for the Foundation Library, Build 25.1024, is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,
Follow us on: