Is there a way to adjust the automated lead-in that MV creates on closed/internal routes to be a straight line instead of an arc?
I know for sure it is creating this arced lead-in on 4-sided cutouts, but it might also apply to PLINES, etc.
Currently, CutRite is expecting a straight route as the 1st segment, and it won't accept an arc.
It therefore adds a really small segment before the arc, which is too small to route correctly on the CNC.
Currently, CutRite is expecting a straight route as the 1st segment, and it won't accept an arc.
It therefore adds a really small segment before the arc, which is too small to route correctly on the CNC.
Thus, it is stopping the machine on any parts that have internal cutouts.
If we can make the lead-in straight, it will solve the issue.
If we can make the lead-in straight, it will solve the issue.
Topic Participants
Sara Johnson
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: