Microvellum Flatshot Token (Overview)

As of release 15.6, the speed of processing when using the Microvellum Flatshot token has been significantly increased for some types of products.

More importantly, the token can also display hardware as part of the Microvellum Flatshot token. This is triggered by a new fifth option for parameter 2.

To display hardware in the flatshot image produced, set Parameter 2, Option 5 to a value of “1.” This option is separated from other parameter 2 options with a semi-colon character.

The following example shows how to configure a 2 Door 2 Drawer Base Cabinet to display hardware in the SW isometric flatshot view.

Fig 1

Here is the result from this spreadsheet modification.

Fig. 2

Click here for a complete Flatshot Token reference.

• Related Articles

• Microvellum Flatshot Token (Reference)

  The purpose of this article is to document the parameters of the Microvellum Flatshot Tokens available as of build 15.6. Elsewhere in the Microvellum Knowledge Base, you will find articles and tutorials giving an overview of the token, how to access ...

• Extended Part Data Token - XPARTDATA (Overview & Reference)

  Some Microvellum users have expressed the need for a way to add custom part data to their reports. The limitation lies in the database fields that are available for this purpose in the database. As of the 15.6 release, there is a new token available ...

• Hardware from Machine Tokens (Overview)

  Microvellum software can now accumulate and populate hardware to the work order database based on specific machine tokens. It is one of the useful new Microvellum features supported in build 15.6.2201 or greater. This new ability works only with the ...

• Overview & Reference: 3D Draw Token and 2D Elevation Token

  Microvellum's library data contains two drawing token columns that serve a range of functions depending on the specific token used in that column. This article will provide an overview of the function of those two columns and the three accompanying ...

• Overview of Dynamic Product Images

  Why was it needed? Customer feedback that because Microvellum software can produce standard casework AND custom casework, the product images used to identify the custom items should reflect the actual customization made. What has changed? Previously, ...

• Recent Articles

• Toolbox Release Notes | Build 24.1.1125.641

  The following release notes apply to Toolbox build 24.1.1125.641. IRIB Setmill Location Fix Fig. 1: Setmill being moved to the start of the route (top) rather than at the center of a straight line, as intended (bottom). There was an issue reportedly ...

• Toolbox Release Notes | Build 24.1.1105.641

  The following release notes apply to Toolbox build 24.1.1105.641 Nesting Fix Fig. 1: The fatal error that would occur during processing. There was reportedly an issue that occurred when clients attempted to process a work order using the nesting ...

• Microvellum Foundation Library Release Notes | Build 24.1025

  The following release notes apply to Microvellum Foundation Library build 24.1025. Additions Added new global variable “Remove Stop Dado On Bottom Edge” for wood drawer boxes. Check this option to run the dado through at the bottom of the sub front ...

• Toolbox Release Notes | Build 24.1.1030.641

  The following release notes apply to Toolbox build 24.1.1030.641 Routing and Profile Fixes Several issues were found with routing and polyline paths: Fig. 1: Horizontal routes off of a part disappearing (left) and appearing correctly (right). When ...

• Toolbox Release Notes | Build 24.1.1010.641

  The following release notes apply to Toolbox build 24.1.1010.641 Biesse Winstore Fix Several issues with the Biesse Winstore plugin have been resolved: There was an issue that would sometimes occur wherein materials that were intended to stack wound ...