Mircovellum Support QLD, AUS
HI, does anyone have a contact for support in queensland, aus? i have filled out a contact form last week, left a message for a call back and tried their hotline that keeps ringing out?A Couple Issues With MV: Face Frame VS Standard Biased (are we equal or not)
TOP TIP copy and paste this into ChatGPT and it will summarise it much better than i ever could and save you reading it all if thats your jam. Who else in the face frame market feels that we are unfairly left behind when it comes to features and fixes?Material Formulas
How does everyone handle naming of their materials? We have it where we have the Potential for PL-1 through PL-10, and are trying to figure the easiest way to name formula driven materials. I am struggling a bit with how to go about naming things forRequest: Lead in/Lead Out; Ramp In/Ramp Out on Tenon Joint
Good morning, We use the ''mortise and tenon'' option to build our boxes. Unfortunately, when the 3/8 down spiral has to make the tongue on the board surface, it makes a burned mark, leaving a bad finish where the bit plunges into the part. If you canHow to change Final widths or heights of a custom cabinet
Ive edited a cabinet and saved it as a custom product, so ive moved the bottom panel to overlay the bottom instead of sitting between the sides, however when creating it and setting a height in product prompts, it is now bigger by the thickness of theCabinet sides not showing
When I draw any product none of the cabinet sides or back appear, I assume there's a setting somewhere to show them? or something in the global properties I didn't add?error "the selected solids are not affiliated with any products in this builder session"
I have deleted, redrawn, made new smart layers but the removable panels for my diewall keep getting this error. So I cant' save it. Any help would be appreciated.Feature Request: Backboards Dado to run full length
As per the title, i have to manually add this at the moment, but id like to be able to have the backboard grooves, run the full length of the side cheeks, even when the backboard is lower by x amount. This helps when constructing and 'sliding' in theGrain matching MV Profile Door
Hi Lenny, I asked this question on the meetup this morning. Just to give you some context, attached below is the MV Profile door we use a lot, which requires an external rebate for the face bead. Currently we move parts individually on the composite toWhere is the Company information setup?
I am new to microvellum so apologies for any seemingly obvious questions, I am interested in the estimation/quoting aspect of microvellum and want to know how the employee information (in particular depertments) is determined and where changes if anyTrying two create a cabinet with 2 drawers left side, one door center, 2 drawers right and another drawer below all these
I am trying to create this cabinet with 2 drawers left side, one door center, 2 drawers right and another drawer below all these, already trying using subassemblies, but I am not being able to. Here is a picture, selected is the drawer that I need toProduction Coach software
Our ROI was to track and sort parts before assembly. In the beginning stages of implementing right now! We see benefit for management having the visibility of handling / tracking parts that do not meet QC before assembly, helping avoid production delays.What ERP systems are people using?
Hey everyone, I'm not sure if MicroManager is still current or available, but I was curious to know what ERP systems other businesses are using and whether they would recommend them or not. Seems as though it might be a challenge to find something that works well for the Front of House, Drawing, Purchasing, Scheduling and Accounts teams....... Any advice would be appreciated, especially from anyone who might be running something in Australia! Cheers.All Cabinets in the foundation library are adding a double up of applied ends
Microvellum Foundation Library 21.0528 When I add an applied end to my cabinets it doubles up the applied ends, for example when I add a left colour end panel it adds a right colour end panel right next to it, how do I solve this issue, without manuallyHow Do I Find the Widest Extents of a Spline/Polyline?
Hello - we are using a digital templating laser to apply the shape of the wall in which the plastic laminate countertop will be fitting. Our process is to template the wall, bring in the .dwg into Microvellum/AutoCAD. The curvature of the wall is broughtFlip Nested Parts on CNC To have Machining towards Center of Table
Right now Microvellum nests parts on cnc with machining towards outside of table. We would like to be able to flip parts so the machining on the parts are done towards the center of the table. Sometimes we will not be able to do to the machining required
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: