SPLIT BACK
I can not find the split back options in the foundation library. Was this removed ? It use to reside in the carcass subassembly in the CC library. Now of course the carcass parts are in the local workbook but I see no split back options Nor the splitSilly question but curious?
On the popup image for Toolbox 2025 - what piece of hardware is being shown on the side of the cabinet?Thoughts on how to add Drawer Bottom Thickness to Drawer Report
I have been asked if it's possible to add the Drawer Bottom Thickness to our Drawer Report and Drawer Parts Report. Currently we are making our own 1/2" drawer sides from Melamine. We are doing this offline where we cut specific drawer side heights basedItem Number value preselected instead of Width value when adding or editing cabinets
Updated from an older build to the current build (ie. from 23.1.1120.641 to 24.1.1001.641) and whenever a new cabinet is added or Product Prompts is used, the preselected value is now always the Item Number as opposed to how it has always operated previously,Foundation Library Update Error - *This is not a valid update package*
Hello, Something strange is happening while attempting to update the foundation library using the utility. We downloaded the correct version as per the instructions on the foundation library downloads page. Once we have selected it and begin the update,Pocket Cut Toe Kick even when all options appear to be off ?
We are running the new Toolbox Release: Build 25.1.0213.641. In our older 50.3 CCL it has been brought to my attention that we have lost the ability to control the option of just polyline cutting the Toe Kick vs Pocketing Toe Kick. For some reason the3D Solid Model Analyzer -Processing
Hello, Has anyone ran into the issue after creating a product with the Solid Model Analyzer, I get this error while processing. "Object reference not set to an instance of an object". Image Attached.PROCESSING TIME
has anyone had a product with quite a few parts take over an hour to process? i have an SMA product that has a lot of parts with routs and it has been over an hour and it still hasn't finished.Feature Dream - Name Manager
The default size of the Name Manager window is (IMO) not terribly useful for lookup tables In order to actually read LookUpTable names and ranges, the two columns must be widened a bit: Making this adjustment each and every time is tedious, and I regularlyIncreasing Material File Window (Left Side)
Can the adjustment bar between project materials and library materials be made bigger and stay fixed, or provide a setting to default to last adjustment made? Currently it cuts off part of the materials allocated to the pointers and goes back to defaultUnandle Exception - Error Creating Window Handle (Anyone know what causes this?)
When it happens, it keeps appearing until I restart the software. Its not the same error as the other i cant place a cabinet bug. This one the interface does work and lets me try to place it. However after clicking OK prompt this pops up each time.Inventor iLogic
Curious to know how forum members are using Inventor iLogic for building Die Walls.How To Bring Popup Windows Come To Foreground
We just setup new workstations running Microvellum build 24.1.1030.641 on Windows 11, performance is significantly improved but there are some issues coming up. One frustrating thing I have noticed that the popup windows that come up when processing a3D Mouse Usage
Do any of y'all use a 3d mouse like the 3Dconexxion space mouse in your day to day? If so do you feel like it has made you more efficient, or made using MV easier or more intuitive? I used one previously when I was working more in inventor but am unsure5 PC DRAWER FRONT
i might have sen this somewhere but can't seem to find where the parameters are for a 5 pc drawer front. pretty sure height has something to do with whether it's a slab or 5 piece but i can't find it.nailers in front
has anyone use the nailers inside the 1/4" back. this is kind of the old fashioned way but i have someone who wants that. I can do it manually but can't figure out how to keep it parametric.FEATURE REQUEST - Use Top/Center/Bottom Nailer Base/Tall/Upper Global
I would be nice to have the ability again to control the nailers in the Globals. We don't use bottom nailers on our base cabinets. I needed to add a Global G!Use_Bottom_Nailer_Base and update the Use_Bottom_Nailer prompt in Library Designer. Thanks!SQL Server alternatives for Unified WO Database, MySQL?
We are looking into gathering data from our workorders, but the cost of SQL Server is too much for a side project with potential but no firm payoff yet. Has anyone tried using MySQL or other SQL alternatives? From this description it sounds as if thereScribe fillers on sloped ADA cabinets
The recent changes to the ADA cabinet are a definite improvement, thanks! Something that it could still use is an option for left and/or right scribe fillers at wall conditions. See attached screenshot. Thanks! TomIn-Wall Brackets that are Room Components and don't create a Product Number and Hardware for Shipping
In the Foundation Library we found the Single and Multiple Brackets products that help us by having drawing representations as well as a product number to create the proper shipping documents. We have actually taken the basic starting point and addedCCL GURU's
Any help on adding Institutional Hinges to the Foundation would be appreciated. I would imagine those seasoned in CCL have accomplished adding the hinge to both 2D Elevation and Sections. The only way I have been able to accomplish this is to incorporateMaster Cabinet vs. Starter cabinet
What is the difference between the Master cabinet series and the starters, or even open cabinets? For what I've tried to make, they all seem like basically the same thing. What am I missing?Is it possible to draw Appliances or even Brackets and not have a Product number?
I have been asked if it is possible to draw Appliances or even In-Wall Brackets to have a 2D and 3D representation but not have or create Product Numbers. Similar to a room component like a wall.Is there a Subassembly List Report that works?
Is there a working report that can pull a list of all the Subassemblies in the library? I found a report in the Company Setup Reports. But it is not working. We would actually like to see a similar report for Products, Subassemblies, Parts, etc...HeightAboveFloor Prompt
Is there a global / project prompt to override base cabinet HeightAboveFloor prompt or a way of turning prompt off?Can't Open New Case
I can't create a new support case from within Microvellum and I can't create a new support case from the portal either. (infinite spinning circles)Toolbox 2025 - is MVREVIEWPARTSLIST missing?
We just upgraded to Toolbox 2025. AutoCAD isn't recognizing my favorite command MVREVIEWPARTSLIST. What am I doing wrong? Thanks!Your MicrovellumFactory is more than 90% filled to capacity!
Hi Microvellum Community, We recently switched to Toolbox 2024, and since making the switch I'm receiving this message when I open toolbox and the splashscreen appears. I have attached an image of the message. The text in the message reads below, "YourPC Hardware - Nvidia RTX3080
I have an older workstation and am looking to build a new one for MV and will also soon have a redundant Nvidia RTX 3080 graphics card from another system and wondered how this would work for Microvellum. Does anyone have any experience with RTX cardsHow to Move Project Level Hardware To Template Level
Hi There, I tried creating some hinges in the project level and now I want to transfer those hardware to template level. How can it be done? Thank youHow do I remove suggested names from drop down menu in "Edit Part" Function
I'm wondering if anyone can direct me to where MV stores the data for the names it suggests when I am using the "edit part" or "add part" features. When I first started using MV I wasn't consistent with my naming conventions when adding new custom parts.product list grid view settings?
How does saving user grid settings work? I have created the settings and saved them but when I come back in a day or two later they are changed. Are the settings set to individual computers or does changes made by other in house users change the gridImprove Microvellum Community search
The "Search community" box on the Microvellum Knowledge Network could be a lot better. When two search words are entered there are more results than when one word is entered. More search words should refine the search, not expand it. Searching for a phrasePocket Door Hardware
I found a post on here that is 4 years old regarding pocket door hardware and bay options for starter cabinets. I am looking to add pocket doors to a product and it looks like this hardware/option must have been removed from the newer libraries. As wellProduct Name Font Increase
I'm trying to increase the size of the Product Name on the Plan View. Under the AutoCAD properties if I increase the Paper Text Height it works, but I want to save this setting to the Dimension style, however Annotative dimension settings appear to beNew Years Goals!
Just wondering what other software people are using along side microvellum? We use bluebeam Revu, pdfexchange, biesse solids. We have a copy of Vetric Aspire that we haven't used in awhile Looking for something to learn in the new year. Any thoughts?Domain Controller or Virtual Machine?
We just got a server set up for our office for MV and it is running great. We want to set up our system to be able to take laptops home and work from desktops off site. I am told from our account manager that a domain controller is not supported and canConverting Text into polylines
We are routing unit number plates and need to routes using a specific font, is there a way within MV to convert text to polylines? i've tried the AutoCad commands to no avail.Video Topic
Does anyone know of a video session prepared by RJ that specifically speaks to "Machining Tokens" and when it is best practice to use "Draw Part in 2D", "Part Properties/Machining Tokens" TAB or "E.D.D."How do "Gaming" Graphics compare VS "Professional" Cards
looking at the system requirements it seems to be suggesting PC's with 'professional' graphics cards rather than "Gaming" cards. Is there any real distinction? Looking at getting a new workstation, A PC with an RTX-A1000 is the same price as a betterNext Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
The Foundation Library – A Unified Library Data Structure for All
For the last year or so, we have been working hard to develop a new library data structure to replace the cabinet libraries used by clients in various regions of the world. The vision of this initiative was to create a unified dataset that would enableToolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox andNew Foundation Library Release Available Now: Build 23.1010
We are happy to announce that a new update for the Foundation Library, Build 23.1010 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, including fixes for multiple subassemblies and promptsNew Foundation Library Release Available Now: Build 23.0517
We are happy to announce that a new update for the Foundation Library, Build 23.0517 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, including the imperial/metric conversion for closetNew Toolbox Release Available Today! | Build 23.1.0222.641
We are happy to announce that the update to build 23.1.0222.641 is now available! The latest release of Toolbox includes resolutions for issues with Machine Tokens, Materials, and the Database Management Tool. Please refer to the complete Release Notes
Follow us on: