FEATURE REQUEST - WIPEOUT
I would like to be able to have a 2D Drawing token that would draw an AutoCAD wipeout, much like the DrawHatch token, it could use a Polyline token above it. By ordering the tokens, you could ensure that the draw order would be correct.Foundation vs component libraries
What are the differences between the two different libraries?Rollouts not in Foundation Library?
New to the Foundation Library...are flat shelf rollout shelves not included in this library?New Toolbox Release Available Today! | Build 23.1.0202.641
We are happy to announce that the update to build 23.1.0202.641 is now available! The latest Toolbox Release resolves two important issues regarding SQL Connection and 2D Drawings. For more information regarding the changes please read the complete ReleaseRestoring Library Spec Groups from Backup
I have a new user that is currently in training. The first project, the new user accidentally deleted Library Specification Groups. I have an overall microvellum backup for our entire library/projects but it is 2 weeks old. Trying to avoid losing theWhy is "Creating A Product Starter " so different in both CCL ands FL
In FL I do not see the ability to add the correct "Nested Subassembly" why aren't Bay Position and Comments loaded??? In CCL This does not happen!!Workbook parameters
Good morning, After multiple tries to find the info, I am reaching out for help. Please refer to the attached link for reference. Would someone provide the links to all workbook parameter examples? Introduction to the Global Workbook Example: I wouldMetafile drawing tokens
I just noticed that there is a DRAWHDIM & DRAWVDIM token for metafiles, whereas those two are not a normal option for other areas. Could someone please explain this?Missing Workbooks Foundation
Did I do something wrong? AGAIN!! LOLFields
Hey All hope everyone doing good. i have a question regarding fields inside reports under bill or materials you can populate all hardware and qtys is their a way i can get this populated data into a drawing title block that can go into a table or anything?Template set up
Super simple one I couldn't quickly find in a search...how do you set a 90 degree line at 0,0 when a new drawing/project is created? Want to set it up to help keep my drawings neat!Change corner in where the sheet gets loaded to on nest bed
i have done a quick search with no luck . I need to change my corner point for cnc to where the sheet gets load to. I am currently top left and need to go to top right . I have been told to change from origin 1 to origin 4 but i cant seem to find it ,Is there a way for doing Barn doors?
I would like to have Barn doors here, with hardware and everything if possible, but I am not being able to create it (the door will replace the normal doors, they are there for material count purposes since I am not able to make barn doors, yet).Drawing Token Issue
Seen lots of users that love using drawing tokens. I'm at my wits end trying to get them to work correctly. The problem I'm having is I add a drawing token and get them working correctly. I go in to add another or even modify one and when i exit it overwritesHinges not showing in the hardware cost for FF cabinets
Having problem with FF cabinets not having the hinges in hardware cost. They "exist" in the product, but not on my estimate. Any idea of what is wrong?Section Tokens
Any help is greatly appreciated. This is CCLCALLING ALL J.I.T/CELLULAR GURU's
These attachments come from a shop that has asked me to "Outsource" drawings for them.. I am reluctant to produce the work for them because of how this template bogs down my computer speed. There are 25 pages to the debug report. What are the optionDashed line in plan
How could I force MV not to place a dashed line in my plan view?Unable to add a comment to edgebanding and have it show up in the Work order.
We have a Diagonal corner cabinet that I setup to Miter the front and cabinet ends to align. (Think residential style) When I setup the parts and machining I changed the formula for the edgebanding. IF(Mitered_Face=1,"MiteredE!Cabinet_Body_Edges_Wide_Span,Cabinet_Body_Edgeband_Material_Name)Wall cabinet cross section
Every time I cut a section in an upper, there is a dm that appears to go to the top. Could someone point me to the correct dim token and its location? There are 3 tokens in the cross-section tab, but I have 7 dims appearing.Saving Room Component (Wall) back to Library
I made some changes to the Room Component (Wall) in the edit design data and want to save this back to the library so all user within our establishment can use it. My question is how do I save these changes? See photos below. With this we are able toComponent vs Foundation Library
We are looking to move to the Foundation Library. My question is how easily can we access old legacy jobs drawn / modeled in the component library?Return a subassembly line
Hi, Is there a way for a subassembly to know which line it is on within the product? For example, i would like the subassembly Component Doors to know that it is Bay 1 via a lookup from within the subassembly: Thanks!MV performance
I notice my MV is running slower and slower. What else we can do to improve the speed?ADA Side panel
Is there a reason why its cut/routed at 91° instead of 90°2D Wall Drawings
In the Wall Prompts under the Obstructions Tab there are options to add a Bulkhead and Column. I needed to add 2 more columns to my wall so I copied all the prompts of the original. Everything shows up in 3D correctly but not in the 2D elevation of theMV Walls
Other than right-clicking in the product viewer and redrawing walls, is there any other way to identify walls in the database? I am trying to identify if cabinets are not associated with a wall automatically.Importing projects BIG PROBLEM
BIG PROBLEM with importing projects. I have been backing up projects weekly. I decided to import one of the backups so I could retrieve some products that were ruined. After I imported the project which had been renamed, My project level materials inTechnology on the Shop Floor - Open Discussion
Many companies are faced with a myriad of challenges on the shop floor. Bottlenecks for specific processes, misinformation - or at least poor information/communication, material handling, strategic flow of material and parts, and so on... So, what kindHow are you utilizing your scrap
We have a lot of scrap that piles up around our beam saw and nested base. Sooner or later it takes up too much space. At that point it's cut up on the beam saw and thrown in the dumpster. How is everyone using up your scrap? Ours is particularly bad becauseChanging Screw Diameter Hole
Just got the Foundation Library and I cannot change the construction holes to 3mm. Can someone point me in the right direction?New Toolbox Release Available Today! | Build 23.1.0112.641
We are happy to announce that the update to build 23.1.0112.641 is now available! The latest Toolbox Release resolves issues regarding ERP Estimating, Part Properties, the Processing Center, Single Part Editor, and Nest Drawings. For more informationDrawer to False front
How would I replace a drawer with a false front?Adding to right click menu
Do we have access to edit our right-click options and add commands? OR is there a way to have a radial menu and add MV commands based on what is selected?Special System Prompt, ProductLabelOne that suppresses the Qty of Labels to One rather then the Products Qty
Need I say anymore... Or is there already something that does this?Microvellum server
Hello Since I use Toolbox server, in the properties of the project, when I go to "project Specification Group" to determine my different material recipes, I have 4 error messages and when the window opens, I I have my basic recipe, but I also have anotherImport Foundation Library
Hi Guys, Can I directly import foundation library in our Component Library configuration which is on SQL server via Options- Utility? I've imported different components libraries and the old V67 and curious if Foundation Library would work this way orRenaming Products
What is the process of renaming products in the library?Draw>Draw Products>
Where do you change the default from "Master Cabinets" to "Frameless Cabinets"?Library Change Tracking
What are companies using to track problems, changes, and additions within libraries?Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Design & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnHappening This Week: Microvellum Focus Group & Release Review
We’ve got two product events happening this week and would love to see you there. Q2 Customer Focus Group - March 3 at 1:30 PM PST This is your chance to share feedback and help influence what we’re working on next. - Register February Release ReviewNew Toolbox Release Available Today: Build 25.1.0826.641
We are happy to announce that Toolbox build 25.1.0826.641 is now available! This build includes resolutions for issues with perfect graining and part placement, as well as various issues surrounding database usage, such as data association, copied productThe Foundation Library – A Unified Library Data Structure for All
For the last year or so, we have been working hard to develop a new library data structure to replace the cabinet libraries used by clients in various regions of the world. The vision of this initiative was to create a unified dataset that would enableToolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox and
Follow us on: