FEATURE REQUEST Item Numbers as Whole Values
Due to label space we use, we try to minimize usage by setting the numbers to 1, 2, 3 instead of 1.00, 2.00. It would be nice if in Toolbox Setup/Options at the Sequence location if we can choose whole integer (1, 2, 3...) Or how many decimal placesFinishing
Does anyone use reports to calculate stain and finish for wood/ veneer parts? How does everyone calculate finish in MV?Toolbox OEM 2022 - SSM Not working
anybody else having this issue with 2022? Sheet sets are not showing up, I cannot edit properties.Two-Tone Kitchens
What is the best method of doing multiple door finishes in the same project in Toolbox? For example a two-tone kitchens with Bases a different finish that Uppers. If there were Room level properties then it would help.Remove Automatic Elevation Title
Hi All, I'm trying to get rid of the Elevation marker that draws automatically with each elevation. We have set location pre labeled as part of to template. For the life of me I can not figure out where to turn this off.What is your favorite feature?
I'm curious as to what everyone's favorite feature is within Microvellum. There is a lot under the hood and I am sure that others would like to discover new things that would increase their productivity. Mine would be showing the point of origin for aRestoring projects from backup
We discovered recently a bunch of missing projects and narrowed it down to an accidental deletion by a user. We only discovered it today but the deletions were done more than 10 days ago so unfortunately I can't just overwrite the database with a backupStay Down Nesting Optimzation Failure
Hey all, I am trying to nest parts that are curved. Most of them have the same or a similar radius. MV will nest these parts on multiple sheets although it should fit on just a few. I have Stay Down on and it will do the same thing set to min or max.Deploying Toolbox OEM through MDT
Hello Everyone, I'm replacing / upgrading over a dozen work stations and I'm interested in using Microsoft's Deployment Toolkit to help automate the process of installing a our core workstation applications. This obviously will include Toolbox OEM. Is there a way to install Toolbox silently during the image process so I can prime the machines and enter the serial number after deployment? My fallback is creating a perfect image of the desired machine including it but I have few different makes / modelsRichelieu Axial drawer system
We are looking at the Axial drawer system from Richelieu: https://www.richelieu.com/ca/en/category/hinges-slides-and-opening-systems/slides-and-drawer-box-systems/drawer-box-systems/axial/axial-drawer-sets/axial-drawer-84-mm-height/1225089?s=axial ApparentlyChange sheet trim on Face 6 files
Hi, Was wondering if anyone had any idea on where to change the sheet trim value for face 6 files? Cant seem to find the value. ThxSQL Column
I need to set all Fin Ends in our cabinet library to 0. It's easy enough to make the change in Lib Dsgnr but it's a pain to drag and drop the products. I'd rather run a query in SSMS like I do to change trims in the materials. What column in the databaseCustom made sub assemblies vanishing
How do I find custom sub assemblies that have somehow got lost. When opening up the sub in the spreadsheet it says it can't be foundHow doe Cost Based pricing data store in the Factory file?
Setting up some "Cost Based" estimating in a custom library from a customized v43.4 library. In the attached image column AC has named ranges with the format equal to "AS" & Activity Station Number & "TotalQty", e.g. "AS101TotalQty". As I have addedReport Layout Help
I'm trying to create a report that will show the shop how to cut closet rods. I'm modifying an existing report. What I would like it to do is put multiple sheets(Rods) on a single page instead of one page per rod. I attached a picture of report designerProduct Prompts -> Save and Redraw
See attached. It would be great if you could add a save and redraw button for product prompts. Once redrawn it re-opens the prompts dialogue box.Detailed Hardware Report
Hi all, I remember years ago of a master hardware report that listed all the hardware as well as the cabinet number that the hardware belongs to. I found this to be a very handy report for multiple reasons and I would like to be able to use it again.Batch Printing Reports to Google Drive?
I'm working on setting up batch printing of reports and would like the output location to be a google drive. Is that possible? JasonHatching
Is there a way of having walls automatically plot with hatching in paper spaceDrawer Box Depths Inconsistent
Hello! I was recently editing a cabinet and went to change the drawer box depth, when I realized that there are two numbers displayed for essentially the same drawer box. I was wondering if someone could explain this to me. The cabinet was a 1 Door, 1Updating Library
How to transfer Global Variables from OLD Library to NEW LibraryAllow us to enter a Quantity when using "New Empty Product"
Just a small feature request. It would be nice if the "New Empty Product" dialog had the ability to enter a quantity of that product at that time. Example below: We have a subset of users that make non-library cutlists a lot through the Product List andAnnotation
Hi all, Is there a best practice for bringing in Item numbers to paperspace when using viewbase? Seems tidious to manually number each cabinet with constant reference to model space. Cheers RedgeDrawing Tabs
The drawing tabs have disappeared from the top left side of the screen. How do i get them back?OOPs
Link for latest update is 404. Well at least for me this morning.How to update the Estimation Type?
How is the Estimation_Type updated? Each time I change the Estimation_Type in either the F! spreadsheet or via the MicroManager Company Data interface the value resets when MicroManager is closed and reopened.Adding doweling under drawer bottom?
I am assuming that there is a default setting for drawer boxes not to dowel under the bottom deck level, as shown in the photo. I have some drawer boxes, 8 drawer bank, and the drawers themselves only measure from 1.5" to 1.75" tall. My problem is thatNew drawer slide, hinge and mounting plate.
How do I add a new drawer slide, hinge and mounting plate to the Foundation Library?Warning for cutting into the spoil board
Not sure about you, but I managed to cut a few times into the spoil board. Is there a way, to have some kind of warning, to let you know you that the tool depth is larger than the board thickness? Would be to nice to have some kind of pop-up window whenG-Code Optimization
I expect the answer to this question to be that I would have to modify to the G-Code manually to get what I am seeking, but I am looking to make a calibration block for the operator. This block as multiple operations, drilling, routing, etc. I would preferStarting point for beginner
Hello everybody. Just loaded toolbox 2021 and was wondering, can anybody here point me in the right direction to find some good solid tutorials on the basic in's and out's of this program? Thanks in advance.Subassembly help
Hi all, I'm back to MV after a long absence. I was last with the program in the final months of v6, with about 8 years experience there. A lot has changed. I'm trying to develop a unique trash pull-out drawer for the 1-Drawer base cabinet. I know howCorrect hardware report ?
In my material file I can rename ( custom name ) sheet goods in the library and push them over to the left to update the project with those sheet goods . I cannot do the same with the hardware . If I rename my pulls to a custom name in the library andParts Houdini Themselves - SMA
I am using the SMA tool to import a 3D desk. There are a few panels that are refusing to work with the sheet stock that has been setup within the global library. When I use another sheet it will create the panel, but I need this part to be labelled correctly.Edging parts.
I am not sure if its been brought up before now, but I would think it would be a good idea to get a EDGE ALL ROUND button in part properties.22.1.0307.641 Edge Band Issues
I just changed the edge banding on all my doors and drawer fronts to 3mm pvc. I just discovered that when doing that, the edge banding is changed for these parts in every spec group even if the spec group has a different material file. I thought maybeDoes anyone have a recommendation for a saw that is compatible with the Microvellum saw report?
Hey guys, Does anyone have a recommendation for a saw that is compatible with the Microvellum saw report? We just want to see if we can cut laminate from that report automatically. Thanks in advance for any input.Face 6 flip sheet issue
Hi guys we keep having the same issue happen when running face 6 flip sheets as you can see in the photos attached. I have made these pieces overdramatic to what happens when running the program. I know the issue is from the sheet not sitting in the exactA few questions for countertop products
Hi There, I am in process of building a corian countertops library and encounter following questions and hopeful someone can help with. Pline Machining token-- How to turn it on and off based on the product prompts. e.g. For the "Route a Circle" machining2D Part Editor Failure - Creates Multiples of the Original Drawing
I am editing a part of a cabinet with 2D Part editor and when I go to re-draw the part and return to the original model it creates 2 new drawing tabs from the original file and they show as locked as I am already editing the original file... Not sureNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Design & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnHappening This Week: Microvellum Focus Group & Release Review
We’ve got two product events happening this week and would love to see you there. Q2 Customer Focus Group - March 3 at 1:30 PM PST This is your chance to share feedback and help influence what we’re working on next. - Register February Release ReviewNew Toolbox Release Available Today: Build 25.1.0826.641
We are happy to announce that Toolbox build 25.1.0826.641 is now available! This build includes resolutions for issues with perfect graining and part placement, as well as various issues surrounding database usage, such as data association, copied productThe Foundation Library – A Unified Library Data Structure for All
For the last year or so, we have been working hard to develop a new library data structure to replace the cabinet libraries used by clients in various regions of the world. The vision of this initiative was to create a unified dataset that would enableToolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox and
Follow us on: