Custom Dowel Spacing on Finished Ends Issue
Hello, I came across what I believe might be an issue today with custom dowel spacing on finished ends. From my digging, it looks the Foundation Library update 23.0623 added a new formula for to the dowel hardware tokens for cabinet bottom/stretcher/nailersCan you make a separate report for each part?
I want to create a report, but have it split into individual reports for each part. (Imagine a part label type of report, but instead of 1 file with multiple pages, I want a separate document for each part.) Can this be done? If it can, how would theDado Machine Tokens
We use a saw to create our dados on our tops, bottoms & sides for our back to fit into. So I've set this up with our dado clearance below: I'm running into an issue where an extra pass needs to be added and it won't add it. Is this machine token limitedLatch Timberline CompX Double Door
Does anyone know where to find the machine tokens for the Latch Timberline CompX Double Door in the Foundation Library? This latch is not listed in the hardware library. I did find it in the "H Look Up Table" under Secondary locks but it only lists theNew Toolbox Build Available Today: Build 24.1.0312.641
We are happy to announce that Toolbox build 24.1.0312.641 is now available! This build includes resolutions for issues with materials and parts with perfect graining applied, issues on the MV server, and issues of 3D representation. Station IDs have beenkey error
can someone tell me what this meansVirtual Boring Issues
I am struggling to understand why the drilling isn't doing what I am putting in. I am sure its something I am missing but I am not able to get the proper boring following the article/instructions. I want the boring to be 1.3125" from the edge, 1.5625"Curved Pieces only Block Nesting
Running some curved counter tops, and everything is nest as rectangular parts with routes except one transtop deck. Cannot figure out why. Anyone have any thoughts on this? ThanksUnable to open PARTS PROPERTIES
Hi all, has anyone experiencing this issue? Could you help me how to solve this error? Appreciate your help. thanks2D/Section Text Height
Anybody else started having an issue with the text drawn on 2d/sections only coming in with a height of 1 since a recent update? It's definitely not a text style issue or the like, going back to a project from before the update and redrawing a cabinetProduct Starter Bay Options
I am trying to find out if there is a way to add other options to the bay. I am wanting to add double doors to options for bays. I am trying to make cubbies with independent and lockable doors.AutoCAD Command
For those of us who draw using "Annotative" Is there a way to create keyboard shortcuts for two scales, when drawing? I use 1/2" and 1". Or is there a command already for it?Pline option (parameter 4) defaults
When i draw a PLINE in the 2D Part Editor, the default set of options in Parameter 4 comes out at 3;0;0;0;0 I have to manually change this to 0;0;0;0;0 if i am using a shaped tool so my model appears correct. Is there a setting somewhere, or a way toBackup
How do I create a backup for MV? The backup I made didn't have any information I needed after a reset erased my computer. MV might want to include this topic in training or do like quickbooks does and instead of asking if you want to save DRAWING 1 whenUnified Work Order Database
We'd like to try out the Unified Work Order database. We're already running a full SQL 2017. Of course I'm setting this up in a clone. No problem setting up the two new catalogs. The connection is fine but, of course, empty. I'm at "Tutorial 4" now but to me it's clear as mud. What SQLCE is this talking about? No graphic, no explanation of the source for this CE. Is the author assuming I'll export all active Work Orders from the current database in Database Utilities for Import via the TransferSQLCeCancel Group Redraw
If you select multiple products to redraw and notice a problem or error on the first product that would also effect the other products it would be nice to be able to cancel the redraw for the rest of the products.Print Labels from Barcodes
Looking for a way we can print out the labels via scanning a barcode on the report that work with production anyone know of something built in for this?Miter Face Frame
I am working on a project that requires a mitered face frame. I have looked through all the product prompts and searched the community forums with no luck. The attached image shows the face frame with return panels, currently is shows but joints. I wouldScrap being saved as sheets under Modify Work Order
Is anyone else having this issue? I am having to manually select and delete each sheet and it is really a pain to deal with. I am verifying that it is all scrap so maybe I am missing something?Drawer Hardware Cost Not Populating cost value in Costing Report
As the title mentions does any one know why this is happening? Drawers are the only material that seems to be a constant issue with the unit cost being a zero in the quoting/costing reports.Asymmetric handles
Is there a setting or variable to handle this sort of thing?Heightabovefloor prompt
Can someone explain how the heightabovefloor prompt works? Does it have to be in a specific row to show up next to the product angle in the prompts? Also why does it sometimes revert back to a previous value if I've changed it in EDD? I've attached aTrouble saving formula in workbook "S"
I am trying to change the joint_tolerance from =M2U(0.2,G!Accuracy) to =M2U(0.7,G!Accuracy) every time we change it it reverts back to the previous formula even though we have saved, minimized, saved again, and saved at the edit design data level. Please"Video Conferencing Options"
Just seeking some valid discussion on the software of choice. I have been reading a bit about "SplashTop"Face Frame Image Report (Stacking Images?)
Hi, Has anyone seen this with the Face Frame image report? It works perfectly when we just want a front face frame. However when I add an Applied Left or Applied Right (or Both), the images start to stack. I've reviewed newer versions of Foundation Library,gap at thick back dado
HI everyone, Switching from Component to Foundation Library and trying to set up all our previous construction standards. One thing with our fully dadoed thick back is the need for a gap between the tongue and sides/top/bottom for a little wiggle room;Microvellum used with CutRite
Hello, Just wanting to see how may shops out there are using Microvellum processing center and having it transfer over into CutRite for distribution to your machines. We have been doing this for a while now and it seems hit or miss for it working correctly.Metafile Flatshot parameter 2 option 5 show hardware not working
Using the current OEM Toolbox build and Foundation library, I can not get hardware images to show up. I have the fifth option in parameter 2 set to 1. Created a ticket and was told "this particular feature is having some problems with how AutoCad hasNew Toolbox Release Available Today: Build 24.1.0306.641
We are happy to announce that Toolbox build 24.1.0306.641 is now available! This build includes resolutions for issues with the Destroy Offal setting, multiple issues in the Microvellum Server, and a change to the polling time of FLA, along with multipleFoundation Library Setup
I am looking at starting the process to convert to the Foundation library and have a couple questions on the setup. When applying your standard global and wizard values (i.e. construction methods, tool numbers), should we be creating a new wizard andJob Opening
We are a commercial casework manufacturer located in River Falls, WI looking for an AutoCAD/ Microvellum Drafter to join our team. Preferred Skillset: · The ability to read and understand architectural drawings · Architectural drafting skills using AutoCADTurn off Hinge Drilling in Nest then have them come in on Pod and rail CNC File
Hi all, i've had the factory request i Nest doors with a product where we have the carcass come from the same material as the doors, but have them drilled after going through the edge bander. i map my parts to the factories request for our planners toAnnotation expands to multiple copies when slected
Hi everyone, I'm using the Toolbox 2023 version. When I select the annotations they expand/explode across the screen creating a line of larger copies (visual only). I can remove them by pressing escape, sometimes I also have to hover over each one forWorkbook Designer
I can not find info on the F Spreadsheet and its function (as it relates to CCL), all I find is documentation on the G Spreadsheet. This is very generic https://community.microvellum.com/portal/en/kb/articles/overview-of-workbook-designer Where mightSetting Up a Miterfold Aggregrate / Saw in MV
We have now gotten a miterfold aggregate (moulder agg) to cut miters and miterfolds now Like this: Prior to this we were using just a vertical V bit We have the agg setup as a SAW on the machine. I have the TOOL / SAW defined in MV and it POSTS out theCountertop width dimensions - Elevation View
Need some help here. I am trying to locate where the dimension is coming from in this countertop elevation view as seen below: I simply want to get rid of it in the elevation and cannot find it. I have looked in my drawing tokens and as well as in editIs it possible to edit the machine token parameter text that shows up in Part Properties?
I know the image can be edited, and User Defined Tokens can be added and controlled. But, can the original token's text be changed at all? There are some missing (newer) elements to some of the token parameters that we'd like to add. Or, if MV has updatedAbility to sync Microvellum materials with a SQL database
We have an internally developed material management system that contains all of our material info. It would be fantastic to be able to update MV materials by connecting to our SQL database. This could be an automated MV Server option or could be automaticLooking for MV Drafters - Melbourne Australia
Melwood Joinery in Braeside Vic are looking for a full time drafter with MV experience. We manufacture joinery for commercial projects across education, aged care, office fit-out, infrastructure and community housing sectors. Plenty of work in the pipelineProcessing products with using Microvellum to Cut Rite
Looking for people that use this processing system for their facility. Possibly in the Philadelphia, PA area? But anyone that used these two programs together is welcome to respond. We have this system in use at our facility, but have minor glitches andNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Registration now open!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Foundation Library Release Available Today: Build 25.1121
We are happy to announce that a new update for the Foundation Library, build 25.1121 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Toolbox Release Available Today: Build 25.1.1204.641
We are happy to announce that Toolbox build 25.1.1204.641 is now available! This build includes several new features added to enhance the usability of the Toolbox login and About Microvellum interface. Additionally, the "Rotate Parts In Nest" featureNew Toolbox Release Available Today: Build 25.1.1120.641
We are happy to announce that Toolbox build 25.1.1120.641 is now available! This build includes resolutions for issues with various parts of the interface, errors associated with redrawing products, copying data, and Microvellum's Beta Optimizer. PleaseNew Toolbox Release Available Today: Build 25.1.1107.641
We are happy to announce that Toolbox build 25.1.1107.641 is now available! This build includes resolutions for various issues with the Beta Optimizer, subassembly names and prompt values, extruded products, and more, as well as improvements to certainIntroducing the Next-Gen Optimizer: Now in Beta
We’re excited to introduce a new generation of optimization tools—now available in beta. This release marks a major step forward, featuring an all-new optimizer built from the ground up with a modern, flexible architecture and a powerful genetic algorithm.
Follow us on: