Drawer Calculator issue in Foundation Library 23.0320
Anyone experiencing this issue with the calculator on drawer bases that are 4 drawers and above? 3 drawer works fine.What year/version of Excel is under the hood in MV sheets?
I'm asking so i can find a comprehensive list of all available functions in MV spreadsheets. I imagine Microsoft would make that available online, but am not sure. The Insert>Functions>... list in MV is helpful, but incomplete. I didn't know until yesterdayFormula to dictate KV Shelf Bracket Size
I am updating one of the products in our library. It is a display case / trophy case and uses kv shelf standards and brackets. The depth of the cabinet is dictated by a prompt, and the shelf depth is dictated by a prompt as well. Unfortunately, everytimeCustom Source Woodworking Is Hiring
Are you someone with Micrevellum Software experience looking for an opportunity to join an innovative team? We are a custom commercial woodworking shop where no two projects are alike and are looking for qualified individuals to join our team. Currently,Jackson Millwork Services is Hiring
Jackson Millwork Services is seeking a qualified Microvellum Drafting engineer for a full time remote position. Qualified candidates should: 1. Possess the ability to read/understand architectural drawings. 2. Be able to enter and modify Microvellum products.ACAD Audit (Not the command)
Good morning, Am I talking about the command, I am talking about a true critique of how I am doing things in Autocad? Process and procedures. Has anyone had this done, or has help folks out on reducing clicks & picks? new ways, and the like.Material Specific Tool
Is there a way to set a tool (specifically a router) to machine specific materials within a nest? I want to set a specific router to route laminated boards separate from our dedicated perimeter router.FEATURE REQUEST: Add Conditional RANGETOSTRING to return only certain values in the data set
The RANGETOSTRING function can return a list of values either horizontally or vertically and be offset to look in a different column or row. But, it cannot evaluate certain cells in the range and return only conditional values from an offset range asMaster Millwork is Hiring!!
I am looking for some Microvellum Engineers to join me at Master Millwork - Southwest (San Marcos, TX). I'm anxious to teach everything I know, and to learn from you, so we can do even more amazing things here at Master Millwork! To setup an interview,Hang-Up on Calculating Product Machining
Has anyone ever run into a system hang-up when trying to draw analyzed products? The analyzation seems to be done without any issue, but as soon as a location is selected to place the product the system hangs with the status bar reading "Calculating ProductFeature request: Scalable flatshot token
Hello, Was wondering if this is possible. We use the flatshot token to create a dynamic image in model space so we can get approvals without having to process a work order. A scalable flatshot would make it much easier to set out our dynamic product imageLibrary "Cleanse"
Looking for ideas on removing unwanted files from our library structure. Mainly the .bak .dwl type filesProject Workbook auto saving to template
Hello, When i make a change in the workbook at the project level, my template level workbooks are being updated as well. For example, if i change a hardware variable in the F workbook for a project level spec. group, then open a new project. The new projectLock Hole Diameter Settings
I am having a hard time remembering where to change the diameter of a lock hole. Currently our National Cam lock setting is routing a 7/8" hole, I need this hole revised to a 3/4" hole. I've been looking in the Lookup Tables, but the only formula in thereSink Sub Front Quarry
Hello, I am trying to figure out why my Sink sub-front items continue to be listed on the door and drawer buy-out report even when the materials are correctly submitted for in-house production. I have looked through the frameless base sink product forComponant doors
This may or may not be a stupid question but here goes. I have created a base cabinet with a flap down push open door, ive added a soft open stay piece of hardware and a push catch, all works great. however,,,,,, these hardware items now show up in otherProduct Viewer
How did I loose my products in this layout and they aren't even in the Product Viewer' for "Redraw from Data Base".Custom workbooks
Hello, I see it is possible to create a new workbook in the workbook designer. Is there a way to rename it for easy access from a formula in a product?Formula help
Hi All, can anyone help me understand how this formula works please? It looks to be referring to the material file for thicknesses and looking for the drawer box name but when I search the material file there is nowhere where it says hettich. I read thisToilet Partition Library
Hi all, Mainly looking towards Lenny and Jaimie, is there an updated toilet partition library or anything to add on to the foundation library?Microvellum Engineer looking to complete your jobs
Hello all, My name is Christopher Vitela. I am a Microvellum engineer with 8+ years experience in the commercial millwork industry. If you or your company has excess work, I can complete the following: Submittal drawings Submittals with revisions EngineeredOrientation Marks
I am looking to add a drill hole at the top of our sides, backs and bottoms. Is there a setting within the Globals to make this change and have these parts marked? I am working in a Library from 2017, so obviously there may be major changes since thenWood Hacks: Spreadsheets (Part 1)
Hello Hackers, Our first Wood Hack of 2022 has dropped. check it out! In this first video of a multi-part series we dive into the spreadsheet side of Microvellum and learn some of the basics behind one of the most powerful aspects of the Microvellum2 door base cabinet with 1 sink in the middle
Hi community hope everyone is doing well. I was trying to add a 2 door base cabinet with 1 sink in it and i know we have a 2 door base sink cabinet but it has like two different sections for the sink and i was looking to have just 1 section sink withAdd Category in Library Designer greyed out
I've been keeping unique/modified cabinets for jobs in their own category in library so they can be used elsewhere in the job, i.e: Fixtures Frameless Shop Name |_Job Name |_Job Name |_ Modified Cab I've just started a new job that will call for quiteIs there a way to update the project level workbook from the library one?
Is there a way to quickly update the project level workbook, instead of manually doing every change for every project? I make a change in the library spec groups workbook designer and would like to update old projects to have that modified workbook. ThePrompt layout
I am working on creating a custom die wall product and as I add all the prompts that I want, it is making a pretty long list. There is a lot of room on the the prompt screen for these, that isn't used. How can I create 2 columns of prompts instead ofBest way to add Hafele Strip Lighting and Extrusion for reports and cut parts?
How would someone add hafele aluminum extrusion as a hardware part and have it actually be a cut part with product numbers and everything for reports? In addition to that, adding the LED tape would be helpful too. I am not too concerned with the 3D drawingFoundation Library “Tolerance” Form/Survey
DISCLAIMER: The title may seem very misleading. This thread is not intended to be a place to post problems or issues. I do not want this to turn into anything negative. This will not be a sounding board or place to vent. Okay, disclaimer aside, I willWizard text field improvement
Could we get some refinement to the wizards?I'd like to see what the material being used is. When the name exceeds the length of the text field there isn't any visual like windows has when you hover over it to show the extent of the field. This makes4 drawer stack Pie cut corner cabinet
I have a project that needs 2 = 4 drawer Pie cut corner cabinet. Would anyone have one designed. They would be willing to share with me? Usable in the 050.7 imperial library? Thank you have a great day.The Foundation "MASTER CABINET"
I am working to create the attached drawing in MV using the "Master Cabinet" and I am stuck on trying to create Bay 3. Any help would be appreciated.Scoop cutout for Rollout Fronts (inner drawers) in Foundation
Does anyone know where the scoop cutout that could be toggled on rollouts in the CCL has been moved to in the FL? Or has it been removed entirely?Workbook precision not holding
Has anyone run across their workbook precision for numeric values set to 0.0 and when you switch to workbook designer and change the precision of the cell formatting to 0.0000 save the workbook and reopen, it's reverted back to 0.0?Is anybody using ERP to estimate countertop production labor?
We use our beam saw to cut parts off of a manually generated cutlist. We don't use our router to cut top decks or splashes or anything. The entire process is manual, from start to finish. Has anybody come up with a way to estimate the labor required forRelease Notes Video for Foundation v23.0320
With every update release of the Foundation Library, it's hard to keep track of it all. We do publish written release notes for each update here, but sometimes a video can communicate things much more efficiently. If you are curious to learn more aboutFoundation Library "Component Drawers" Broken?
Hi, Just wondering if anyone else using Foundation Library is experiencing this break. If you set the subassembly to have 4 Drawers and run a calculator it works If you change the Drawer Qty, the calculator will no longer work It appears it's overwritingProductCode Behavior
Hi Lenny, I didn't want to keep asking questions in the other thread. You replied there: "Jeremiah, the ProductCode should work exactly the same no matter the library version. Since it's a Toolbox feature, we have no control over how it works. We justFEATURE REQUEST: FILTER Function Added to Spreadsheet Functions
I was really hoping that the Excel FILTER function was a recognized function for MV spreadsheets. Unfortunately, it is not... poop. I can really see some great use with this function and the 2D Drawings subassembly. Imagine having a lookup table (or tables)"LISP Routine status and its use with OEM"
I am curious if the "Development Team is, or may be, considering if the option is available from AutoCAD to add its "LISP" platform to OEM? And if it were available what would the addition cost impact be, for the upgrade OEM with "LISP"?Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Design & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnNew Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofNew Microvellum Release Available Today: Build 25.2.0114.641
We are happy to announce that Toolbox build 25.2.0114.641 is now available! This build includes resolutions for issues with the Processing Center, saw trim values, label output file paths, and more. Additionally, in accordance with Microvellum's new subscriptionWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: