SLIDING DOORS/BYPASS DOORS
there doesn't seem to be an option for sliding or bypass cabinet doors any where, has any one used these in MV ? there is lots of different hardware for this but no mention of it in MV.
Microvellum Engineer | Drafting Services
Microvellum Drafting & Engineering Solutions (Drafting Service) We could be the one last search you would make since we make sure that for every client we get, we follow your standards & ensure the project delivery on time with Accuracy and precision.
New Video - Formula Driven Materials
Hey all, I make a video going over the basics of formula driven materials here: https://youtu.be/fvHFUlbiU2M This is something I get asked a ton about so hopefully this is helpful for anyone curious about them!
Open Position - Microvellum Drafter
Wellington Millwork specializes in creating custom millwork. We are located in Alma and preparing to relocate to Drayton. We are looking for someone with experience in drafting using Microvellum to create drawings for clients and generate cut lists for
Is there a way to adjust the automated lead-in that MV creates on closed/internal routes to be a straight line instead of an arc?
I know for sure it is creating this arced lead-in on 4-sided cutouts, but it might also apply to PLINES, etc. Currently, CutRite is expecting a straight route as the 1st segment, and it won't accept an arc. It therefore adds a really small segment before
Adding Text to show up on the Nesting Optimization Report
My CNC operator would like to see the Tab icon show up on the nesting optimization reports so he knows if he has to watch a part or not.
Foundation Drawer Scallops & Side Toe Kicks
I was looking through Foundation a while back, I turned off the Drawer Front Scallops (make a radius curved front), I cant seem to find where that was, anyone know? I downloaded and checked out the 23.1010 version, and didn't see it in there either. I
FEATURE REQUEST: Allow Modify Parts Tools to "Stack" Before Updating
Currently, if you are needing to modify multiple parts separately you have to execute the modify parts tools for each and the product has to redraw each time. It would be great if the commands could "stack", allowing the user to stay in that command until
Adding Hinge plate to cabinet part
I have a cabinet with a pull-down front and want to add hinge plates to a fixed shelf. Where do I find my hinge plates so I can add it and have the correct machining?
Post COVID Remote Workforce
Hey all, I wanted to get a pulse on how everyone is working in the post COVID world, specifically in drafting/engineering, and how you have adjusted, and what obstacles you are still encountering. Has your company brought back all microvellum users in
IDEA: Split the back automatically if the back is greater than the width of the sheet
As stated above this is for when you want to maintain vertical grain on the backs of your cabinets, you do get a warning that the back is greater than the sheet size when you process it, but i think Microvellum/Toolbox should be asking you if you want
Border Method: Setmill Location
You can set this to be left, right, top or bottom but I would really like to be able to set this so that the setmill location is always towards the center of the sheet so that each part remains connected to the main sheet for as long as possible. Does
custom tab pull - foundation library
Foundation library - 23_0609 tab pulls needed a 200mm ~ 7.875in pull which wasn't there substituted in appropriate width into formula of larger pull of the machining token. =LOCALIZEVECTORLIST("1;-0.078;0|1;0.0787;0|-6.8828;0.0787;0|-6.8828;-0.078;0",UCN(1,0),1)
Real Time Origin + Rotation values
Hi all, Is there a way we could get "Real Time" origin + rotation values when we move an item? Example: the first pic show's a chamfered back, and the corresponding parts properties origin/rotation values. The second pic is where I would like the chamfer
Tall Fridge Cabinet Filler
Not sure if this is the correct area to put this, seems that the Tall Fridge cabinet scribe filler subassembly ignores a situation where there is a full end panel and only makes the filler the height of the cabinet and not the full height of the unit.
disc with dado
has anyone figured out how to route a shallow dado into a circle? when i scan with SMA i get this... for some reason it wants to pocket the whole inside and when i try to add the dado to a plain disc i can't get it to lead-in without catching part of
Warning Messages
When you drop a cabinet from the Product Prompts window, a warning message may pop up if something triggers the warning. There is an option to "Do not show again". After you check the box to not show the warning messages, is there a way to undo this so
2D Hinge Hardware Is Not Drawing in Cross Section
When I draw a Cross Section of any product with the door, my hinges are not drawn, and it is drawing a section label below. Everything else is drawing right. Machining for hinges is drawn too and 3D drawings are correct as well. How can I get Microvellum
New Toolbox Release Available Today: Build 23.1.1107.644
We are happy to announce that Toolbox build 23.1.1107.644 is now available! This build includes several resolutions for issues like errors appearing in the event log with the use of certain tokens, issues with 3D representation of routes, and the addition
Error when re-processing
Does anyone know what this error is or how I can fix it? I am getting it when recreating gcode after editing the composite drawing.
Pilot Hole Drilling on Diagonal Corner Cabinet
I have a problem with the pilot hole drilling on my Diagonal Corner Cabinets. The problem is on the Upper and Base Diagonal Corner Cabinets. The formula for the pilot holes is not moving the holes back from the corner of the top and bottom to contact
Countertop Tight Joints / Dogbone Joints
Hi, I'm curious on how I could end up doing "dogbone" joints on our countertops with the CNC or Point to Point machines? I'm sure someone has had this issue and has a solution. I've tried a couple of methods and just want to see how other shops are dealing
How do I flip an Aluminum Handle to the bottom of the drawer front?
I've tried everything, also searched topics and couldn't find anyone that had previously asked this question. Thanks for any help, CT
Copying Prompts From one Cabinet to Another
How do you get a Prompts Tab to copy from one cabinet to another? In the Screen Shot Below, we set up a "Signature Accessories" Prompt Tab for our Wall Cabinets. We are then saving these wall cabinets back to the Library building our own company specific
Left and Right "nailers" are different lengths in my corner cabinet?
Hello Microvellum Community, In a previous post I mentioned building a library of corner cabinets for my company. I am not sure what happened but my nailers are coming in and being drawn at 2 different lengths. A difference of 0.22". Anyone else run into
Router lead ins
I do realize that we are given the option to add ramped leadins to toolpaths but would it not be nice if we had further options? The reason for this request is that when you have a project with a large number of irregular shape cutouts It is not only
Lock hole routing [Toilet Partitioning]
HI All. I have hardship with Partition door lock drilling. I just tried to use the default setting, but it looks doesn't right. it is not i have attached 3D with Bsuit. ad my nesting file image. How i can fix this issue and how i can initially change
Accessing product prompts from sections
is there a setting to open the product prompts from sections? one of my ex-coworkers had the ability to do so but no one else does and now no one know how to do so.
FEATURE REQUEST: Alignment of columns (especially machine tokens) inside Edit Design Data subassemblies
When in a sub in Edit Design Data, if you've stretched/extended some columns for better visibility (particularly on Machine Tokens), if you go into Workbook Designer to make some changes and then exit it, the columns become highly misaligned. The button
Product Group Image
Is anyone using the Product Groups and setting an image? I've created one and the image I've attached is being stretched and disproportionate. It won't center it like all other images for products. I've sized it similar to other graphics with no cha
Separate item numbering for different products?
Does anyone know if it's possible to have products numbered differently for specific products? For example, we'd like our countertops to be numbered differently than our normal cabinets. Where a cabinet is numbered 1.01, 1.02, 1.03, ect, we'd like our
RIP TOOLBOX
Hello Shane, It seems this is the new way to get attention and get tickets answered on this new "improved" system. The gcode microvellum produces does not match what is drawn in the composite drawing. BIG PROBLEM. CHECK TICKETS.
Show specs when we use the machining sequence
I don't know if it has already been done or it's already something we can do but I would like to have my specs (like depth cut, speed, tool in use, etc) when I use the machining sequence, sometimes we only know the program wasn't good once we run it in
Repositioning Graphic original point
Hi Members. I try to reposition my strike from a 14mm offset up. I moved and repositioned the graphic file and redrew it from the drawing, but it was still in the same position. How can I make reposition for the graphic original point?
How to formulate False Front Width + Filler Width - Drawer Gap
As the title suggests, I'm trying to formulate the total width of my false front to add the width of the filler on left and/or right and subtract the drawer front width gap. Fillers + Cabinet Width - Drawer Left and Right Gap = Total False Front Width.
Get ready, a new Cases Portal is coming soon!
Hi Microvellum Community Members! I just wanted to follow up on the announcement we made a few months ago where we mentioned a change was coming. There has been some chatter and other posts where we mentioned some of the details, but we wanted to update
PLINE Z Values
Does anyone have any experience with creating a PLINE token that uses negative Z values? If i use these coordinates: 100;100;1|115;150;1|130;100;1|130;100;-5|102.5;120;-5|102.5;120;1|127.5;120;1 i get this on my drawing: I would expect it to lift and
subassembly name pointers
is it possible to get subassembly name pointers like the part names in the global variables, as we use quite a lot of our modified subassemblies
New Toolbox Release Available Today: Build 23.1.1027.641
We are happy to announce that Toolbox build 23.1.1027.641 is now available! This build includes resolutions for issues like spec group settings being overwritten by XML files, the frequency of certain alert pop-ups, and label images not displaying horizontal
Adjusting Corner cabinet chamfer width
Hello everyone, I am working on building a library of corner cabinets for my company using our current specifications, and I require the need to alter the width of the chamfer. I have found the following: "Adjusted depth back corner:" =IF(Notched_Corner=1,Notched_Corner_Depth,IF(Chamfered_Corner=1,Chamfered_Corner_Width*SIN(RADIANS(Chamfered_Corner_Angle)),0))
Next Page