Workbook Question
In the H workbook (Prompts tab) what is column C representing ? I am wondering if the value 5 shouldn't be 7.5 ? Also what is column M used for?People of Australia
I'm curious if this is just us or a country wide thing at the moment, how is your workload lately? We are particularly quiet at the moment and it's not showing signs of improvement at this stage. I'm sure the Iran/US war issue is playing a part with allSync database over multiple locations
For those that have engineers in multiple locations around the country / world, How are you syncing databases across all of them? If one location creates customizations to a product how do the others know about it and access it? From what I know thereCorna Support
Hey gang! Am I going crazy, I swear you used to be able to add Corna Catches to doors? I cannot for the life of me find the prompt or hardware material, or am I imaging things 🤪Cumulative document of all 2026 MV Build Release Notes
@Clay S. Can we please get cumulative document for all the 2026 release notes? Similar to all the other years. Thanks!Title block not populating from project properties
I changed the property value to be something that was less confusing and now the info wont populate across the drawing. Unfortunately, I know enough to try to make the change but not enough to fix it. I can still add info to the blocks by double clicking.Is it possible to edit the Composite Drawing default
Wondering if it's possible to edit the Composite Drawing default for how the text is laid out under the nest pattern. As some of our material names are long it covers the Yield value as seen in the Composite Original jpg. If possible I'd like to changeChanging Configuration - Splash Screen
I swear during my training videos, there was an MV command I could type to bring back the splash screen and change configuration. Would anyone know what that is? Âpull lookup table
Trying to find the lookup table for pulls. We are trying to add 10 new pulls. Article dosen't seem to match my library. I'm in a component library - 47.1. The article says there should be a lookup tab in the G workbook. I see no tabs at all. https:/Round parts
Seems ridiculous, but I can't figure out how to cut a round part. I'm trying to make a simple tabletop. It's the only part in the product, but I added the circle to another product just to get it cut out. Had some trouble adding a circle to the productHas anyone modified the Drawing tokens in Wall Room Component product?
Like the title states, I've been wanting to make modifications to the wall product drawing tokens but hit a wall (pun somewhat intended) when I come to save my work to the existing product. has anyone successfully fiddled with this product? thanks,Dimensions on Report Images
I am trying to revamp our product detail reports and I am having trouble finding where to control the dimension text appearance. I can change the dimension style and text style, but I can't figure out how to make the text darker so it's visible. DoesBricscad Transition
We are beginning the process of transitioning to BSB. We are currently on Toolbox OEM 24.1.104.641 Wondering if its ok/good idea to work on projects interchangeably between the current toolbox BSB and our current Toolbox oem Can we just install it sideEditing Descriptions in Parts File
How do you edit the descriptions that print in the Parts Drawing after running a work order. We are wanting to add the Edge Band information to the list that prints with the Parts Drawing, similar to how are DXFs print, but are unsure where to go to changeHow to add a Multi-Pass to our VCUT Bit
Looks like our CNC operator is telling me we need to have this be setup as a 2 pass operation whenever want to use this bit. I dont know how to either set up the route token to pass twice/setup 2 routes tokens that drop down as needed. Or just easierActive MV User
Is there a way to reference the logged in user on a report? where is this data? ex. including engineered by: [currently logged in user] on nest report EmpoloyeeLogin table would seem to be the logical place but no luckMicrovellumWorkOrder & MicrovellumGeometry
Installing a foundation library on SQL Server to run beside our component library until we can transition. Assuming i can just create the “MicrovellumWorkOrder” & “MicrovellumGeometry.” databases but name them differently for the new version. Leave theTwo different size screws used in construction is it possible?
We currently are using screws and dowels for construction. Conformat screws (7mm) used for construction of top/bottoms and ends. We want to use a smaller screw (3/16") to attach the back to the sides. Is there a way to specify two different sizes forBase_Door VS Base_MDF_Door
Can someone explain the difference between these two? Base_ door and Base_MDF_Door. Is the Base_MDF_Door, one that gets routed out to look like a 5 piece door?Q: How are feature requests prioritised?
Just a question around how feature requests are actually prioritised now. Is it mostly based on likes and engagement, or is production impact weighed separately? I ask because writing a proper forum post takes a fair bit more time than submitting a ticketV-grooves on MDF slab door
Any idea on how to add vertical v-grooves to MDF slab doors?BricsCAD Subscription
Hi Fellow MV users, Since BSB now includes all features. We are thinking to convert to BricsCAD and want to gauge what everyone is paying for Subscription with 1 license.WMF part Images
I'm using the bluecell saw postprocessing station. and have WMF. images turned on I cant however seem to get the program to produce wmf images for parts without horizontal boring or some sort of machining? How can i get a image for every part. The reasonFlip individual parts for Face 6 Machining?
I see the options for Flip Face 6 Type: "NoFlip", "Mirror", "FlipXAxis", & "FlipYAxis" There's also the option for "Run Face 6 First" Is there any option to flip just parts needing Face 6 operations? Like generate the Face 5 nest, then generate individualUsing OEM Tool box should we switch to...
What are some of the benefits of switching from the OEM Version to the newer configurations ? as a new user I don't know what the differences are. My concern with staying with the OEM version, is that we will not benefit from any improvements to the software.Mircovellum Support QLD, AUS
HI, does anyone have a contact for support in queensland, aus? i have filled out a contact form last week, left a message for a call back and tried their hotline that keeps ringing out?SMA Wire chase pocketing
New to SMA. My wire chase in studs are pocketing instead of just routing a perimeter cut. FIX??Lunch and Learn Webinar- Recordings?
I was hoping to participate in the Lunch and Learn this past Friday, but I couldn’t make it happen. Does anyone know if recordings will be available for these? I looked around on the peAk platform but I didn’t see anything. Maybe it’s too soon? HopefullyUnexpected Machining pattern in vertical rail.
The spacing for the dowels and screw holes in the vertical rail is not in the correct location. There should be only one dowel and one screw per side, however two for each are displayed. How do I remove the second pair of holes?Breaking Composite/Laid-Up Material into Parts
Is there any way to separate a composite/laid-up material into the separate parts of the core material and the plastic laminates for each side when processing a work order? For example, 0.6875MDF.000_Wht Liner_8844-WB would need to break down into a sheetDimensions not showing
I am in the process of setting up toolbox BSB and I can not get dimensions to show in front view or side views, only top view. When I dimension the side view it shows in the top view.Finished End Reveal Condition / Library Designer
Hi All, I am looking for some input. We have a condition that on a left or right finished end, our reveal = 0. My best guess is to use library designer to update all of our products with this: Current (Product Prompt > Face Options) Left reveal =IF(G!Hinge_Institutional=1,Thickness_Left_Side-G!Door_Overlay_Institutional_Hinge,IF(OR(AND(Left_Applied_End=1,G!FE_Flush_To_Door_Face=1),AND(Left_Filler_Width>0,G!Fillers_Flush_With_Faces=1)),G!Inset_Door_Drawer_Reveal,G!Default_Door_Drawer_Reveal))Define space between nested parts based on material/tool
Hello, is there a way to define the space between the nested materials based on material or tool? Our default border cutting tool is .375" diameter and space between nested parts is 1/2". When we cut solid surface we use a different tool which is 1/2"BSB Publish/Plot Job
Is there a certain way to publish a job through BSB? Normally in OEM, we just selected all of the paper space tabs and just publish the job. BSB I can't do that. Also, anyone else having weird issues with the "Publish" Button? If I left click it, it justMove Dowel holes to centerline of part
I want to move the dowel holes on our drawers to the centerline of the part. We use 5/8" for our drawer sides. The hole placement is 0.375", I'm assuming its getting that from 0.75"/2 I have looked in global settings and also the machine token, but IProcessing Station not reporting batch name on Folder creation
So we have 2 routers here and when i create a batch for the Biesse, it'll report out and add _BIESSE to the folder name (Biesse is the batch name). When we run a program through our Homag it doesnt add _Weeke at the end of the batch report. I can't figureneed help with 2d instructions
so i spent some time getting our 2d instructions set up, we just did an update and lost those changes i made. now i'm trying to save our own 2d instructions as a new subassembly and change G!Drawing_2d_instruction to the name of my new subassembly. itDRAWING ONLY OPENS "READ ONLY"
I was working on a room when toolbox closed unexpectedly. When I tried to reopen it, it would only let me open as read only. How do I open it so I can finish editing it? I have tried to restart toolbox but that didn't help. And no one else has the drawingLost my ARCHITXT.SHX font and dfd-bold.shx
Hello, I've been using microvellum for only 2 weeks so I need your help lol. I work in Quebec so i have to use accents on some letters and i normally get them by using combinations of keys but it wasn't working even though my keyboard was set to frenchimport 'component' based products into 'foundation' environment?
Is there any option to import custom products from a component based library (v050.7) into the foundation library system? I have a good many custom products, a few of which would not be easily replicated. Thanks! T.Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Foundation Library Release Available Today: Build 26.0327
We are happy to announce that a new update for the Foundation Library, Build 26.0327 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Today: Build 25.2.0330.641
We are happy to announce that Microvellum build 25.2.0330.641 is now available! This build includes resolutions for issues with editing formulas in Part Properties, perfect graining, toolfiles, errors occurring during processing, and various issues withinNew Microvellum Release Available Today: Build 25.2.0317.641
We are happy to announce that Microvellum build 25.2.0317.641 is now available! This build includes resolutions for numerous issues with Microvellum's optimizer, block nesting, the nesting tools, label creation, part machining, and more. The Product PromptsDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnIntroducing the Processing Center App: The Shop-Floor Replacement for Production (MicroManager)
We want to share an important update regarding the Production application (also known as MicroManager). After careful consideration, Production is transitioning to maintenance-only status. Effective immediately: No new Production licenses will be sold.
Follow us on: