Hybrid Cabinetry
Am I alone in seeing a tendency towards cabinets that are a sheet stock and iron hybrid? I have attached an example and the real question is if it is possible to add the 1" x 2" iron pipe as a material into MV, and if so, how? TIA Ben
The Token BORE Parameter 8 is not valid
I added a new drawer slide and everything displays correctly. The location of the spot holes along with the DIA of the spot holes are right. This error pops up 4 times when i redraw the product, can anyone point me in the right direction to fix? "The
Part Update to correct Dimension
I have a rectangle that needs to be cut , made from a misc starter part. If I click on the edit part to add a inch to the length and hit OK , shouldn't my 3d parts also up date with the added 1" inch? This happens with pretty much with all my misc parts
Perfect grain for Wall Panels
Hello, I could not find any information on how to have panels matched on custom sequence matched sheet stock. I found a video for kitchen doors. Nice, but how you do that when your container is 20'x15, spanning across multiple sheets of material that
SAW
does anyone have experience with a Giben Matic SP 90 12' Horizontal Panel Saw and how it integrates with MV? is there special software needed?
Hinge plate location for dividers
Up until recently all of our face frame hinges where mounted to the face frame. It didn't matter where the hinges landed because they would be mounted in solid stock by the hardware department. Since starting inset and beaded inset face frames I need
Part Labels Printing Incorrect Quantities
Hello Everybody I am having an issue where when i print my part labels, it will not have the correct quantity of labels per part. Has anyone ever ran into this problem? -Product = Wordrobe Unit -Product Quantity = 12 -Product consists of 9 parts -Only
Iterate through a string list
Considering that I have a user defined property called “Room Number” (at room or project level) that stores a list of values separated by “|”, for example: “R1|R2|R3|R4” I’m able to access the property, split it in the “|”, get each individual values:
Rear Modification
Where do I make this changes to be able to go less or more than these parameters?
Limelight with Martin Rowan, Technical Manager at Microvellum (UK) S1:E4
In this Limelight episode, Martin Rowan, a Microvellum Technical Manager in the UK, discusses his role as a member of the Microvellum team, how his background and experience are helping clients excel with our software, and what he is looking forward to
Library Tool Paths and spindle direction
Trying to find a way to change this Tool Direction before it kicks this out from SMA? Any Ideas? Attached
Fixed / Adj shelf thickness
Hi all, What would be the easiest way to use 25mm thick shelf instead of 16mm IF the cabinet is wider that 1000mm? I know there's probably several ways to achieve this, I'm just curious to see how users have achieved this in the past. Thanks Aidan
How to copy machining from left to right?
Hello Guys! I have to creat a machining at both side of my Adjustable Shelf, I did success to creat a "3 sided Notch" under "Part Properties" for the left side of my shelf. What should i do next for creating the same machining for the right side of my
Link not working
Hey the link to this doesn't seem to be working.
Material Prices
I have been using MV for quoting for a while now having spent a lot of testing getting it right how I want it &love it. Over this time I have entered a lot of material prices in sheets & hardware. Question is - When moving across to a new library is there
Design Manufacturing Report
Can someone tell me where I can find these numbers
Item Number
Is there a way to write a formula that will populate the products item number automatically?
Looking for Microvellum Operator in FT Lauderdale Fl
We are a custom woodwork shop focus on high end residential projects an looking for experience Microvellum operator. call 954 588 48480 or send resume to [email protected]
Limelight with Daniel Mesecke, Account Manager at Microvellum S1: E3
In this Limelight episode, Daniel Mesecke, a Microvellum Account Manager based in the UK, discusses his role as a leader in the UK, and what he is looking forward to with the future of Microvellum in his area. Our Limelight video series is committed to
QUESTION - What are the rules/restrictions on MV item numbers?
Things I've learned: - There can be no alpha characters after the decimal (we tried that once and it crashed our stuff). - If multiple special characters are used before the decimal, MV no longer auto-generate the next item# correctly when a product is
Adjusting product item number
How do you change the size of the product number for my drawings.
Item Number Location
I have created a master product that draws many different cabinets but for some the item number draws underneath. I am aware of the prompts to move them but I would like them to be correct automatically. For example, for one base cabinet @ 24" depth the
PLINE Machine Token Parameter 4 [options], What are the options?
Here's the PLINE token in the parameters list. In parameter 4, what is this [options] cell supposed to contain options for? I ususally leave this cell blank, but am having some serious trouble with some ROUTE tokens not nesting right, though looking good
Estimating discussion From sept 8th
Hi, Was unavailable to watch this, is this available at all to watch now? Thanks
Microvellum on Linux
I would love to see Microvellum programs on Linux! Anybody else?
what are causes or MV crashes?
Or how can I find out why I keep crashing ? Over the last week and a half MV seems to crash at least once a day. About three days ago it crashed 3-4 times in the same day. I have been keeping open tabs to a minimum of about 5 or less.
Remote, Microvellum Engineering & Submittal Services
Dear Sir/Madam, With over 25 years of experience, we can offer remote engineering & submittal services for an hourly rate. We work with Toolbox 2020 (AutoCAD 2D & 3D), Inventor, SketchUp & Revit 2022 You may contact us at: (201) 399-2210 or email us at:
Remote, Microvellum Engineering & Submittal Services
Dear Sir/Madam, With over 25 years of experience, we can offer remote engineering & submittal services for an hourly rate. We work with Toolbox 2020 (AutoCAD 2D & 3D), Inventor, SketchUp & Revit 2022 You may contact us at: (201) 399-2210 or email us at:
Cutting small flipping door In trash cab door?
Is there a sub assmebly to add for this option ? I need to cut a small horizontal swining door in the main door a a trash cabinet. Something like you would see in a fast food place where you put your trash.
WinXiso flashing repeatedly during processing makes computer unusable
We recently reinstalled Microvellum and now whenever processing work orders the WinXiso program window flashes repeatedly and makes the entire computer unusable. I have uploaded a video of it here...https://youtu.be/LNz-orMId14. Any ideas how to make
Sheet Set Manager Questions
I'm just starting on implementing the Sheet Set Manager and I have a few questions: 1. If it is a big job and the Sheet List Table is bigger than the sheet, is there a way to make it into 2 colums to get it all on one page? 2. I want to include Room
All Cabinets in the foundation library are adding a double up of applied ends
Microvellum Foundation Library 21.0528 When I add an applied end to my cabinets it doubles up the applied ends, for example when I add a left colour end panel it adds a right colour end panel right next to it, how do I solve this issue, without manually
MV Door Configurator
MV Door Configurator - Only draws drawer fronts, can't work out how to draw doors on door configurator.
New release available today: Build 21.1.0827.641
We are happy to announce that the update to build 21.1.0827 is now available! Here are some of the features that have been modified within this build: We modified the "Product Cost Details" command. The Estimate Price will now access the database value
Adjustable shelf
Hello Guys, I am trying to add adjustable shelves on both side of the Cabinet Division, but in the sub prompt I have only the options of adding shelves to either side of the division. what can i do to have the shelves on both side? Thanks! Amy
MV_Foundation_Library_21_0831_Metric
How do I setup a Toolbox platform to use for experimenting? What is the best practice to do backups and archiving? How can I explore the new Library in a toolbox setup?
Looking to nest Parts with panel border properties
Hello, Going to try and explain this the best I can, hopefully it makes sense.. When I manually add a sheet using "nest editing & 2D machining tools", add my parts/machining, and then process, it does not process like it would if I use "create a new work
Mouldings
How do I add a moulding in this case a custom cornice to the 'drawer room components' in the library. I want it t follow a polyline like the preset ones in the library. I've drawn the profile and added to library - mouldings directory. From here I can't seem to find how to include it so I can drawer it using MV.
Saw Optimization Preview report
We are in the middle of switching from Cutrite to MV Saw optimizer for most things. One of the things the shop personnel are missing is the preview report from Cutrite. (attached). Is there a stock report for this? I see one, that prints a full page
Employment Opportunity Reading, PA
I am looking for a full time Microvellum operator. We are willing to train, but would prefer knowledgeable candidate. If you are in the greater Reading, PA area and interested, please contact me at [email protected] thanks.
Next Page