Drawer Height Calculator
I appreciate in the prompts it does say which drawer. I was wondering if it would be possible to have the drawer list come up from top to bottom. I think I understand why it is the way is in the spreadsheets. Would it be ok if moved the Bottom DrawerEnd of Life Announcement for the Component Cabinet Library
Hello, Microvellum Community! We have some news to share with you regarding the Component Cabinet Library... .......... Effective October 1, 2024 We are officially announcing the End of Life (EOL) for the Component Cabinet Library as of October 1, 2024.Costing Report Sheet Stock Incorrect?
I am inputting sheet stock pricing at the moment to finally get our costing reports set up, and I am having some issues with understanding how the sheet goods are calculated. You can see I have $70.13 for the price of this sheet for drawer bottoms. WhenCorner Adjustable Legs
Just started on the new foundation Library, is there a way to easily add an extra Adj leg into the corner of corner cabinets? at the moment the only corner leg is on the leftBlank 2D Elevation Instructions Still Draws a Rectangle and Dimension
I've got a product that's just 4 parts I created from the Misc Panel product. The Elevation Instructions are blank, but it keeps drawing this rectangle and overall width dimension. Is there a way to stop it from doing this? There are no sub-assemblies3D drawings are not accurate
There was a time, not so long ago when MV would make 3d drawings that would show the radius on inside corners produced by the round bit. This was 100 percent accurate. Not long ago, this was changed to draw the 3d drawings to show the inside corners as square. I don't like this because the drawing and the product do not look the same. Just my humble opinion. Anybody else feel this way?New Toolbox Release Available Today: Build 24.1.1206.641
We are happy to announce that Toolbox build 24.1.1206.641 is now available! This build includes a resolution for issues with remote work orders on MV Server. Please refer to the complete Release Notes for more information on these changes. How to GetDEPTH DISPLAYED IN 2D ELEVATION
I'm in the latest version of the foundation library - anyone know where to turn off the "14.125D" in the image below? I looked in the 2d elevation variables and did not see anything.. maybe i'm missing something. Thanks DavidPassing values to Subassemblies in Prompt Values
I have a question about using the Prompt Values column in the workbooks. This is admittedly a little weird, and situationally specific. We're trying to set up some controls on our locks where we can choose either keyed alike or not in our wizard. WithViewbase
I want to keep the section in my paperspace showing a number of exploded details but want to delete the elevation (on the left) which the section was taken from. Can this be done without losing the section itself.Adding Machine Token for Valance
I would appreciate some insight on how to add the correct Token and the formulas needed. Any help would be appreciated. I have added Associated Const. Holes (Type 2), is it best to add (type1) instead. And what would the first argument formula be? THANKSFatal Error
When I process a project, I sometimes get a Fatal Error and Microvellum needs to shut down. I process the job, assign the machining center to the parts and process the parts. When the processing is completed, the Fatal Error pops up, and Microvellum closesFEATURE REQUEST: Sub & Nested Sub Warning Messages display when product is redrawn (like L! ones do)
If you put a warning at the product level, it displays on a pop-up when the product re-draws. But, the same is not true for subs and nested subs. If you put warnings in them, they only display when you create a W.O. It would be great if they would workNew Foundation Library Release Available Today: Build 24.1127
We are happy to announce that a new update for the Foundation Library, build 24.1127 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous reported issues, updates and correction to existing items,Import a XML file twice into existing project
We had a case where we accidently imported a XML file for a room into a project twice. Microvellum did not give an error that the room already existed, it just ran the import. The products were not added to the same room. The products were added to aMerge new library hardware items into existing library folders
I recently updated my library and the new hardware items were added into separate folders named after the library build number. Is there an easy way to merge the newly added library hardware items into the existing folders. see attached screenshot forReturned from Vacation and my Sandbox has random user names (none of mine) and I cant log in
Is there a way to disable log in to Microvellum? My sandbox should only have my name and a few local users but for some reason it has reverted to some weird version. Anyone know how to bypass this?Library designer help - adding new prompts to selected products
Foundation 24.1025 I've added a couple of new prompts to the master cabinet and want to add these new prompts to all other cabinets in the library that share similar prompts. For example, the master cabinet has a prompt "Right Applied End", when you clickEdgebanding Thinkness Library Change
So people don't have to go through the trouble I did, at some point after the October library update, the edgebanding thickness defaults changed to a Negative number. For example 1mm thickness was 0.03937 is now -0.03937. For anyone using any of the defaults,Turn cabinet interior to OPen Finish in Foundation Library
How do you turn the interior of a cabinet to Open Finish in Foundation Library? Used to be a radio button in CL. Thanks.SMA parts have filleted corners
I finally am getting some of the tapered extruded SMA parts to spit out almost correctly. I just can't figure out why it rounds over half or all of the corners on them. Anyone else with this problem? Any ideas? -Ezra nest corner detailBase 4 drawer - foundation library
this is the latest version of the foundation library 24.1025 Base 4 drawer - foundation library bottom drawer is second on the list rather than last? I was entering cabinets into the spreadsheet and wouldn't have caught it expect that i decided to drawGlobal Variable list
Hi guys Can anyone please advice how does it work: I am setting up my specs for my dwt template. I can not find all available data from specification group. Global variable list does not appear all the data I am looking for. Do I need to activate themAngled Cabinets
Pretty disappointed Microvellum doesn't haven't an easy way to handle outside mitered cabinets in this situation. Maybe some of you Microvellum Gods can come up with a product where the side angle can easily be adjusted for us simpletons ;)Calculation speed of different functions
Would anyone know which of these would calculate the fastest? {=IF(Rib_X_List>0,Rib_X_List)} =LARGE(Rib_X_List,COUNTIF(Rib_X_List,">0")) Or is there be a better way to find the smallest none zero value in the list Rib_X_List? Thxhastag on nest sheets and cut size
Just recently we had one of our operators bring up an issue where the cut size and finish size on the label doesn't match. We have a pre-mill on our edgebander so these two sizes should always match. If your running 3mm eb on your parts then you cut offSubassembly "Row Value" Keeps reverting to garbage data (Without Prompt Value Override)
Has anyone seen this? I've seen it about a year+ ago. After reporting it to Microvellum they said to just create a junk row and "ignore it". The problem is, now the bug is back and its picking other rows to invalidate. Its sneaky, random, and can causeNew Option to "Open All Drawings" at once within Processing Center Nest Options
Not sure if there is a way to do this already or if its been requested before. But when I am reviewing Nests within Processing Center in order to open the Nest drawings, I have to go back through the menu each time and open the drawings individually.New Toolbox Release Available Today: Build 24.1.1125.641
We are happy to announce that Toolbox build 24.1.1125.641 is now available! This build includes a resolution for an issue with setmill placement on parts with IRIB enabled. Please refer to the complete Release Notes for more information on these changes.FEATURE REQUEST - Sort Tool List
It would be nice if in the tool file, the tools could auto-sort alphabetically/numerically, or have the option to sort by tool# or by tool name or something. Right now, they are in the order in which we entered them, but that makes it harder to locateCabinet Width growing at back
Has anyone had issues with Cabinet widths being greater at the back compared to the front? Cabinets are often 1-1.5mm wider at the back. Is there a simple fix for this?Now Hiring Microvellum Engineer - Bryan Texas
Keystone Millwork in Bryan Texas is looking for an experienced Microvellum Engineer to join our team and grow with us. We are a custom commercial millwork shop focusing on University and Hospital projects with Tennant Finish also being a part of our business.Added New Pull Elevation Orientation Issues
I added a pull to the library and the 3d model works and orients based on the product (Drawer/Cabinet door). My issue is coming when I get my elevations. The 2d orientation for the pull only works vertically and won't rotate horizontally for me. 1.02CTRL + TAB keys closing software
Cannot switch between layouts with CTRL + TAB. I am getting a fatal error when doing so.Button Fix Hardware Add
I was wondering if microvellum could maybe add button fix to the hardware list in the library. We have used the button fix type 2 for removable panels that have tight reveals and cannot have much lift off. I was debating on putting them in our libraryUpper/Tall Cabs Side Panels Extended 2"
In our shop we extend the side panels of upper and tall cabinets 2" to accommodate for moldings. I saw the Valence Height Top option in the Globals, but that seems to take from the overall cabinet height and we don't include those 2" in our "cabinet height".Using multiple Z depth option for the associative hdwr PLINE token?
I tried using the multi depth option in the asso-hdwr pline token (parameter 9) for a deep mortise but it seemed to break all the other tokens in that hardware (all the other route had a Z depth of zero)... Has anyone used this option successfully? Alsohinge selection and plate boring Foundation Library
Where can I set these on a Global basis?Products not showing in Draw tab
I seem to have a problem with getting the products in the Draw tab of Mircovellum to show. See the screenshot attached. I've restarted Mircovellum and my PC a few times and the issue persists. I have a workaround where I can add products to the projectEdit Design Data - Force Grain Direction
Hi I want to dynamically change the grain setting of a part between "None" "Force Width" and "Force Length" but can't add a formula to this setting in "Part Properties" and can't even find the field in "Edit Design Data". Any thoughts?Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnNew Microvellum Release Available Today: Build 25.2.0114.641
We are happy to announce that Toolbox build 25.2.0114.641 is now available! This build includes resolutions for issues with the Processing Center, saw trim values, label output file paths, and more. Additionally, in accordance with Microvellum's new subscriptionWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: