thru holes from face 5 + face 6 vertical drilling
I feel like at some point the face 5 and face 6 vertical drilling would combine to make through holes but maybe it never functioned that way. Is there a way to set this up?
Work Order Problem Popup
Hi ! I have a problem with my work order, I can't make it ! This two pop up appears ! Any Idea ??
Machining Verification
These parts are meant to have a mitre on them cut by the Vpnt. How can i verify that has actually been applied? I cant find a place that shows me what tools are being used for each operation. Coming from modern CAM software, this is super clunky and
Multiple Offset Route Priorities
When using the fifth cell of the PLINE token you can offset the vectors mapped out in the first cell and you can do this multiple times when using the "{X:Y:/|X;Y;Rotation}" format, but is there a away to set individual priorities for these offset routes?
Hinges & Pulls
Having a problem with my Hinges & Pulls not showing correctly. Any idea how to fix this or what the problem is?
2D Editor Warning Message
I'm getting this warning message when I create machining in the 2D part Editor. Can someone help explain what is causing this and what I need to do to fix it. Thanks.
Hole boring through spoil board
How do I adjust the depth of these holes? The spoil board thickness is set at .75 and I set the vertical drill spoil board penetration at 0 in the tool file, yes still goes through.
Cutoff Saw Processing Station type
I was wondering if anyone out there is using the "Cutoff Saw" processing station type. I am trialing this right now to see if this might be useful for our solid parts going to our Salvador chop saw but am not having much success. The sample processing station from the v50 library is producing programs but they are so far from where I need to be I am not even sure where to start tweaking. Just looking to see if anyone out there is using this feature successfully or if I'm trailblazing my way into
Adding a custom hardware item. EX Camlock locking device on drawers
I am at a loss where to start with adding a hardware item. It is a camlock lock. We are manufacturing furniture pieces that require these on all the drawers and doors. I need all the correct holes for drilling. I do have the 3D drawing from the manufacturer just not sure how to get it into MV and give it machine tokens and drawing tokens. Would it be the same as adding something like a door pull?
Part Labels assigned to individual parts
It would be helpful to our nesting labeling process to have a way to add labels to a default part label group and be able to change the part label per piece from that group when processing batches similar to assigning a toolfile to parts in the processing center. There could still be a default label that would be assigned to the parts but the option would be there to change the label from the nesting label group for any parts assigned to a Nesting processing station and from a saw label group to
Rotating Parts in Nest Only Has 2 Directions
When rotating parts in the Composite if the piece in question contains machining it can only be rotated at o and 90 degrees. It doesn't keep rotating to 180 and 270 degrees.
Optimization Option
I think an option for optimizing from "Largest to Smallest" would be an option to add. It would be a little different to "Best Yield" in that: 1- The First part with largest area would be placed first 2- Second part with next largest area would be placed if it fits, if not skipped untill largest part that fits in available space found. 3- then go back to the largest available part and continues. This would avoid a lot of my last sheets having large parts and lots of waste. None of the options in
.IFC Export from toolbox
Goooood morning MV Team, I am running into the need more and more to export our 3d models to .IFC format. working with the BIM environment. our Clients are pressing really hard on BIM these days and understandably I get it. however tool box OEM 2020 does not have the option to export to .IFC. can we please get this feature added to 2020 asap. hot fix next build, today tomorrow, which ever comes first please. haha. the work flow is: we take their Revit model, pull out of it the main floor plans
Saw Groove Width
We currently us the Saw Tool for all of our 1/4" back machining, except upper sidewalls, these are done with a 1/4" router bit. The two widths vary a little and I'd like to increase the width of the Saw Groove but can't locate where to do this at.
Work order editor is missing key features
The new work order editor feature could be quite useful but is currently mostly unusable since it wont let you change part sizes or material thickness, you can change the quantities and sizes of materials but not thickness for some reason.... This would have saved me a couple hours of re doing work because a sheet thickness changed and now I have to reprocess everything for the job.
Machining for file bars
For our file drawers, we run small routes in the front & back of the drawer that holds the file bar in place. We currently have a parametric program we use in WoodWop but how can I incorporate this to automatically populate in MV when a File Drawer is selected? Is it tons of work to make this happen?
Nesting Parts - Centerline Routing
I created and processed parts for a die wall. When I open the drawing with the nested parts, it looks good with the nested parts being cut using Centerline routing. After I create the Machine G-Code for the panel, the Centerline routing becomes Right Compensated routing . I did the same thing yesterday with basically the same parts and the Centerline routing remained Centerline routing after making G-Code. I have not changed the toolfile or the processing station. I tried creating a new work order
How to make Hardware machining to move from face 6 to face 5?
I am using ROUTEDHOLE as a machining token for hardware (lock) and want to make it on face 5. By default, it is on face 6 and lock assembly is on face 6 too. Is there any way I can have that machining on face 5?
MV is Flipping Parts for CNC -- How do I stop this?
I have some single parts with holes drilled at specific locations but in equal increments. The whole unit had to be split up but it wasn't perfectly symmetrical so the hole patterns differ from part to part. We are getting one section ready to be dry
Perfect Grain For Horizontal Grain
We are starting to see more horizontal grain cabinets specified, I'm wondering how other shops are dealing with horizontal grain-matching? We are sending all our doors & drawer fronts to a nesting router so on the few small projects I've had I have manually aligned the parts. This process is time consuming and doesn't work great when there is a drawer base next to a door cabinet because due to the router bit diameter it is impossible to lineup parts. I would send the parts to our beam saw but MV
Make all router tools designed as the Incremental Step tool?
This would make perfect sense to me. What am I missing? If there was a "Max Cut Depth Per Pass" and "Max Total Cut Depth" for each tool, then you would never have to make Multiple step tools, or multipass tools (providing only 1 tool number is involved). MV would always add passes as needed for thickness. The Vectric programs are set up that way, and I haven't run into any problems because of it. There must be a reason so if anybody knows what I'm overlooking, please tell me?
Why is there a field for sheet quantity if it doesn't tell you when you have exceeded inventory?
This has always been a question for me. Why even have a field for number of sheets if there is no functionality that uses it? Or is this one of those issues where, if you buy another module, it can be made to work? I hope not. Theoretically, one would think that the field is there so you can input your inventory, and at least be notified when you run out, or, even better, be given the opportunity to use another sheet size if you run out of the ideal size. Does anybody know if MV has ever, or
Work order problem
Hi, when i go to do a work order for my jobs it tells me i don't have any products in the jobs. but when i go check my product list its all there. what could be wrong?
Removing Border Rout From Nest
I am trying to figure out the best way to remove the border route for parts going to the nested router. I just finished a project with 16 head-wall panels, all the same size but with each having about a dozen unique cutouts for electrical, med gas etc, no two panels were the same. Normally all our parts are nested at the router but because of the proximity of the cutouts to the panel edges I needed to cut the panels to size, edgeband, then machine the cutouts on the router. I accomplished this by
How do I change a product name based on whether a checkbox in the product prompts is checked?
I am adding a checkbox prompt called Island Base in all base cabinets. If it is checked, the bottom is made to equal the cabinet width, the bottom x origin is moved left by the amount of the side thickness, the sides height are reduced by the bottom thickness, and the sides z origin is increased by the bottom thickness. I would also like to append the product name with the word "Island". What kind of formula do I need, and where do I need to put it?
Sawing optimizer optimizing each part on separate sheet.
After processing, somehow the sawing optimizer is optimizing each part on a separate sheet and giving me extra sheets than actually needed. For example, I have two doors in a product and optimizer is giving me those two doors on two separate sheets.
Creating New Machining G-Code from Drawing in Single Part Editor
When I try to create a new machining G-Code from a drawing for a new work order, the first batch always gets an error saying "The path is not valid. Check the directory for the database...'". I click "OK" to the error message. The same error message pops up a couple of more times after clicking "OK" again. After 3 tries, it says the process is complete. Before processing, I checked for the work order folder and it has been created. When I try process it again afterwards, it works fine. All subsequent
Machining Updates
Today I am editing G-Code, again. We have a project with thousands of 1.5" holes is 1.5" hardwood. What I am doing is programming this with a step cut, first at .75 and then at -0.0050. The issue is that Microvellum has never figured out how to ramp from the first to second cut. No we have to raise the tool and start over for the second cut, this is a huge time waste. So I edit the code, it's actually pretty easy, to ramp from the first to second cut. I have been doing this for years all the
Option to recall a work order list
I know we can pull up a work order that has already been created but i would like to see an option that would back that up one step. I would like to be able to pull up the work order at the step where you are creating the work order and just selecting your products. SO many times i process a work order and something is wrong and i have to go back and make a correction somewhere and then run it again. But since a change has been made i have to go through the entire process of selecting every single
Add a column in Overdrive Pro that shows the room each product is in.
When you are open in the whole project it shows every product. The rooms are sub cagetories to the project. When looking to find which room a cabinet is in, you have to click and search each room. It would save considerable time if the root listing for the project had a column for the room the cabinet is in. Then it would be simple to look up the cabinet number and see which room it is in.
Not selecting correct tool
Has anybody else had an issue with the routing tool not being correct in the machine files. I have MDF cutters set up for MDF, and the correct tool names in the MDF material file, yet when it is processed and sent to the CNC its reverting back to the default Particle board cutter.
Work Order Selection - Search function no longer searches
Has anyone else noticed since installing Build #20.1.417.642 to TOOLBOX for AutoCAD 2020 or 2019, you can no longer use the the search bar to find a Work Order (WO) or WO group in Edit Existing Work Order > Work Order Selection > Search? This is happening on both the workstation and travel laptop. Prior, I was able to enter my Job # or criteria and would have only those with in the search come up. Now it does nothing, just have to scroll through & find them manually. Pressing ENTER does nothing after