Make Numbering Sequential on Reports
is there any way to make the reports print and get made in the correct number order? right now it does this odd system of doing all numbers with 1 first, then 2, then if nothing else going in order like 1234, but i want it from the start to go 1234 asFEATURE REQUEST: Adding basic metafiles to all foundation library products
The solid model analyser adds some basic metafile data to each item solid modelled, This allows product detail reports to show a picture of the item nested, Good for joiners to help see what they are making, Already in most products, needs adding to theSticker report
We haven't been able to change the orientation of the edge banding, for some reason it orients on the wrong side and we can't figure it out, do you have any suggestions to change that? Attached are picture of the sticker and the cabinet. Thanks in advancereports
hi, does anybody have a sample hardware report they would be willing to share? At square 1, just looking for something to import to get going that's more than the original from MV install. Thanks!Work Order - Split Edgebanding
How would I make the edge band report split for either subassemblies, or parts, etc. I was thinking of using the comment section of the parts to basically say "I am door". Then filter it by that. Example, we have cabinets then we have trim items thatHardware Items in Parts List Review
Just a thought, it would be nice if the Parts List Review command also showed the Hardware Items for the selected product, perhaps in separate tab. Or if someone knows of an easier way to easily/quickly see this, please let me know. As far as I'm awareHTML Report - Product Flatstoken (Picture)
Team, I am trying to have Flatstoken in my HTML reports. I'm check the WMF and Flatstoken before creating the report but is nothing coming. 25.1.1013.641How to add the dowel matrix to part label?
Looking to be able to add the dowel matrix to a scannable bar code we would put on a part label. How tough would that be? I saw a video but didnt really grasp at how to effectively add it to a barcode we can scan.A Report that shows saw pattern instructions?
Perhaps it's there somewhere, and I've just not managed to find it... Is there a report that shows the optimized saw patterns, with phased cut instructions? Most of the time we'd use our automagic machines... but sometimes they are unavailable for operation...Labels
We bought a Biesse ASFT nested based router our first. We are having problems getting the label information to the machine to print labels post processing. has anyone accomplished this and how ? Also I don't suppose any one has a label report for a 4"Part Label - Edge Indicator
Hello, We used to have labels for the parts in the shop. We'd like to update our information regarding the edges. I'd like to replace the 'X' on the part drawings with something else. For example: E = Exterior edge or I = Interior edge. Does anyone amongRFID Suggestions
Hello, We are a small custom cabinet shop (~12 employees) exploring the option of RFID. Our main pain point we think this might solve is our CNC machined fronts that we have finished out of house. Because we are a custom shop, we have multiple customnesting reports error
Since i started the free trail of bsb and my work is on the toolbox 2025 i now cant off nest layouts it comes up with error. i cant even open the report designer to check the same error pops up very annoying. see screenshot attachedFEATURE REQUEST - Tool information needs to be visible on reports
We have the border tool displaying on our nest reports using the Material Code from the PlacedSheets table. We would like to display more information (like the description "3/8" RH Comp" as an example) about that tool if possible, but I can't figure outReport not reporting correct height.
The Report is not reporting the correct height for bar back panels. It is taking the overall height of 1000mm which is listed in the cut list, and it is removing the toe kick height. Its not a big problem but i can guarantee someone will make it to theLabels missing edging
These labels are in my opinion missing the parts for the edge banding, except its not edge banding but a "face mounted Lip Down" piece of framework, there is nothing to tell the guys to apply an edge to these before painting.Stop auto printing of labels when processing work order
Hi, Every time I process a work order, it automatically sends the part labels to the printer which I do not want and I have just tried it on another user and does not do it even though all settings look the same. To my knowledge I have not changed anythingReport Modifying help
I start to understand modifying reports until something I think is simple just doesn't work. For our work order, I am trying to separate the edgebanding count by the comment field of our parts. We do trim, doors, etc. and that is defined in the commentReport Groups wont process all reports
This was a small issue in OEM but its a bigger in BSB, if it doesnt crash, then it just doesnt process my reports, i might get 1 out of my chosen 6 or so, if i'm lucky. I found that the move to BSB broke something and it was looking for referenced reportsHas anyone made reports for 5pc door hinge boring?
This is always an issue for us and end up just hand writing the hinge placement on our 2D drawings for the guys in the shop. It would be awesome if there was a report for this using prompts. I was seeing that there is a Z value in the spread sheet usingAdding Toe Kick Height to Product Report
Hello, I'm new to Microvellum Reporting and ran into this issue. Our shop had problems with inconsistent toe kick heights—e.g., products built with a 4" kick (because it's standard and we are used to this height) only to be discovered after delivery thatNesting Issue again
Dont know why i seem to be getting this sort of thing happening again, has something changed lately anyone else notice anything different in the recent updates? I had a tech come online to help me and we did go into the processor but i dont recall anythingWork order summary by batch
I would like a report that shows only the products, hardware, sheets etc... used in a single batch of a work order. How can this be accomplished?Regarding Reports
Hi there, wondering if anyone knows how to simply select a directory location before running a report? For instance, I would like to be able to choose for the save location to be a specific folder so that I don't have to go in and move them everytimeHelp with Door and Drawer Front Detail Report
Build 24.1.1030.641 Foundation 25.0319 Door and Drawer Front Detail Report Two questions: 1) How do we get this report to sum all the same size/name parts? 2) Why is the "Door Style" column blank, where does the data come from?Extra pages showing in report and report designer
I am having an issue with my reports printing blank pages after the main page when the info does not require another page. I would really like this solved as it is adding sheets that don't need to be there.How to add cellphone number with sub report
I am having trouble trying to make my contact cell phone number show up on the job summary report using a sub report. Does anyone have an idea on how to do this?Master Cut Report help
Build 24.1.1030.641 Foundation 25.0319 Master Cut Report I'm trying to "group" certain parts together in the report. For example, for parts names we don't need to see "Base", "Tall", "Upper" nor do we need to know if a part is a left or right, if it isProduct Comments On Reports
I am trying to figure out how to change what is printed on our "Work Order Summary" report in the product comments field. Originally when we started with Microvellum we requested that the comment field contain text indicating which ends of the cabinetSum of Data Containing "Right", "Left", and "Middle" (Report Designer)
Can someone help me figure out how to calculate the sum of data in the 'code' tab containing a certain word? I need this because in {Subassembly.Comments}, we modified our comments formula in our subassembly workbook so I have drawers that come in "TopFormatting Fraction In Reports
Hi Everyone, How do I go about formatting fractional units in my reports. I use the metric library and am trying to add secondary units in my reports, for my customers that like imperial. Right now the fractions are coming out to the closes 1/2". WouldBlank First Page in Report Designer
How can I stop this first page from showing up if it's blank?Altering Work Order Settings
How do I change the organization system for the saved "Work Order" .MPR files? When I generate a new work order, it creates .MPR files for our CNC and it organizes the "part files" by material. Can I change this to organize how I want, say by tops, orIssue with sheet qty for duplicate sheets
Ive been doing jobs that require multiple copies of cabinets for a hotel. in total I have 10 styles of cabinets with 8 of each. when i nest the parts i run the material costing report to see how many sheets i need, but when im going to cut the sheetsBatch Name Report
I am wanting to add the batch name to a report we use at our Point to Point CNC. I know how to reference the data inside reports, but I cannot get it to populate with a new batch name. I can show "B1" but when I make "B2", it still shows "B1", I am notPrint label - Select Process station
Since transitioning to Foundation, I have lost the ability to create a Part Label or Nesting Optimization Report that only shows what has been sent to a certain process station after optimization. This was originally addressed 3 years ago using the ComponentReport Groups not publishing Part Labels
Hello All, I am trying to set up report groups for my team. we have 3 different CNC's so in order to make sure the right set of paperwork goes to each machine, We process in batches and publish Labels, Nest, and work order summaries for each one separately.Is it possible to access the PROFILE machine token in a report?
I am looking to generate a report for our Shaper operator. I have PROFILE tokens on my parts so that the 3D model shows correctly but I can't find this same data anywhere in the various report dataset options. Just want to make sure I am not missing somethingReport - Display Dual Dimensions in mm and fractional inches
Hello, What is the report expression to convert a decimal number to the nearest 1/16" on a report when the MV options are Imperial, Decimals, and "Yes" convert to metric? These expressions show both the dimensions as decimals and I'd like to see the imperialTouch to Print or Scan to Print Product Label
We manufacture 180+ cabinets per release and that equates to alot of product labels. Currently we are printing the labels at the Caseclamp and it just prints 180+ labels and then someone has to find the product number for the cabinet they are building.Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Registration now open!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: