Foundation Library - RH Door Handle Formula Not Correct
As the tilte mentions - the formula has Left not Right and the handle height need to be considered (i.e base point).Foundation Shelf Standards
Where are they located to make the change from line bore to standards?Toolbox is sooooo slow and lags
I have a project I am doing, and 3D orbiting takes 10-15 seconds to just load, then I can move around, but when I release it takes another 10-15 seconds to load. Moving around in this project is miserable and makes it take 3-4 times the amount of time.Make a New Library Product Category
I really want to add a couple new product category codes. Those category codes like "B=base" "T=tall".. I really want to have one for some other common products, so we can call on similar wiz/globals like "G!Base_Cabinet_Height" that are fundamental andDRAWLEADER Improvements
Hey ya'll, I'm currently in the process of trying to automate some callouts on our 2D drawings and came across this issue with the DRAWLEADER token. Right now it just draws a two segment polyline where one of the vertices has a modified width to makeIs there a quick method to Draw and Process
I had a Joinery wall that was Curved and needed a lot of holes in the panels that could not be done in a drilling array.shaving cabinet doors
Hello All whats the best solution to do shaving cabinets with 16mm substrate with 4mm mirror to face and then add add 3mm metal trims to each door. im sure their is a easier way to do this.Switching to Foundation Library? Why or why not?
Ok general question for people still on Component Library (like us) What is stopping you from switching to Foundation Library? We just found another fundamental flaw at the core of MV in Component Library (not going to go into) and the response we getHiring a Microvellum Designer
We're looking for a Microvellum user to join our team! We are located in Calgary, this is not a remote position. Check out our website to get and idea of the type of work we're doing. If you are interested, please send me a message and I can send youIDW file creation upon saving AutoCAD file
While working with Microvellum, my coworkers and I often come across an oddity where .idw files will be created and stored in the folder with our DWG files every time we save our drawing. By the time we've finished a job, there will be upwards of 20+Master Vertical Designer Cabinet
Where are the instructions to change the vertical Splitter to a "Drawer Stretcher", once you change the "Product Type" to "base"?Feature Request: Highlight entire row of subassembly that is selected
I know that when accessing the subassemblies from the main cabinet prompts the selected subassembly has bolded text. What we would like to see is that the background of the row for the selected subassembly be highlighted a unique color similar the pictureHardware Options Tab
Hi All, I've been wracking my brain for a bit now and I can't seem to figure this out but is there a way to hide the Hardware Options Tab if it's not needed? In my situation, if my customer is not ordering knobs or pulls with the job, then I don't wantFoundation "Cross Section" DIMS
In CCL I can make a change/add to section dims to satisfy a clients desired looked, through Part Properties" Where in the Foundation will the option be found, it is not in "Part Properties"Is there a way to export a multiple projects at one time to individual Database and Zip files?
Is there a way to export a multiple projects at one time to individual Database and Zip files? Will it be added in the future? When using database management currently we can export 1 “Project” at a time sending to its own Database & ZIP file for possible use or re-import later if needed. While you can do a batch export of job, they are in 1 database and not individual. Is there a way to export a multiple projects at one time to their own individual Database & Zip files? Is it something thatNew Toolbox Release Available Today: Build 24.1.0528.641
We are happy to announce that Toolbox build 24.1.0528.641 is now available! This build includes resolutions for issues with face 6 imaging in part reports, as well as a UI update to allow for product geometry generation to be displayed. Please refer toAccept Cookies Strip (Cant it be removed?)
I click I Accept but it doesn't do anything. I do use Ad Block if that makes any difference.Foundation Library Addition Request
It would be great if there was a way for users to help guide the evolution of the foundation library by being able to submit requests in some kind of structured way, beyond posting in general community pages. Could there be a dedicated thread? Or somethingArchiving Old Projects
What is the best practice to archive old projects but still have them accessible in case of future necessities?Multiple Subassemblies of The Same Type
Over the years of editing products we now have multiple subassemblies of the same type. I.E. about 10 Carcass Base. Is there a way to easily purge these? Safe to delete the extras with Database Explorer and then checking the left over one?Changing Draw Box Depth in the Foudation Library
I need to change the box depth, The product needs 4" open space behind the drawer boxes. I cant use the chase option because the outlets are in the bottom of the box. Any help would be appreciated.Edgeband Part Size Adjustment won't work with premill setting: "Edgeband Thickness"
Curious if there is a way to get the Part Size Adjustment setting to oversize parts when you have your premill settings set to "Edgeband Thickness" in the processing station setup? The ol' negative banding hack won't work since the thickness value isLibrary Designer - How to change Alias (It keeps reverting back)
I'm updating some part names with a new formula and it changed the Alias from Base Overlay Bottom to (Formula). I tried changing the alias here but when I rebuild library designer it changes back to (Formula) When I change the alias on the right side,ADA Sink Angled Frame - Can't remove dimension line in elevation drawing
Hey ya'll, I was wondering if anyone knows where the elevation view dimension line that appears above the ADA Sink Angled Frame Foundation Library cabinet is coming from? I thought I understood drawing tokens, but for the life of me, I can't find whereFeature Request: Closing Part Properties no longer sometimes Redraws Product
I don't know if this was added as a "Feature" or a bug, but after messing with a product and save/redrawing or working on its sub assembly or viewing one, when you save and redraw and are happy I usually close or click the X. When I do that, it frequentlyLayer Separate from FP/Elev/Open
Currently the Floorplan and Elevation fall on the same layer. Placing on separate layers would allows for different linetype, colors, weights. The Open cabinets all fall on the same Finish# layer, so the FP/elev are the same, but also doesn't delineatePart size changes on nest
I have just noticed that the part size can change when nesting, specifically when you have a closed tool line border that extends past the size of the part. when I nest it it changes the part size from 794mm to 801.5mm, as the spacing between parts onAssigning a Tool to a material type
Hello Everyone, My CNC operator had a request for me. What he would like to do is use Tool 2 (lets say) on Veneer sheets but use Tool 11 (lets say) on Melamine sheets. It would be the same Routing type and size just a different tool number. The reasonFace 5 or Face 6 Associative Machining Between Two Panels
Is there a way to have associative boring or routing for one panel face 5/6 also go into an adjacent parts face 5 or face 6? Thinking of using a dowel to align two panels that sit face 5 to face 5 on each other.SQL KEYS
I have been reading the "K/B" regarding the" MV Data Dictionary" along with SQL and would appreciate input on understanding "Foreign & Primary Keys" within various "Tables" that show their relationship. My goal is to fully understand MV SQL "Data BaseCannot find Gola shadow rails after install the library update
Hi all, I just updated the library to the latest Build 24.0419, which indicated that added the Gola channels for shadow rail pulls, but it seems like I cannot find it in the product prompt. Any solutions about that? Based on the update release note: https://community.microvellum.com/portal/en/kb/articles/microvellum-foundation-library-release-notes-build-24-0419Master 2 bay ---adding more bays?
Is there a simple way to add more bays to either the horizontal or vertical 2 bay Cabinet?MVValueFormat
Does anyone know why MVValueFormat works on existing Reports that come stock with Microvellum, but when I copy it exactly to a custom report it doesn't work and I get this error?How To Align Variable Block Elements
I am working on revamping our templates, and in an effort to streamline as much as possible, I'd like to make it to where we can enter the job core in the UDPP and it updates our material indexes, but I can't seem to figure out how to get text to alignCutRite Grain Matching/Perfect Graining
Hey ya'll, For those importing Microvellum parts into CutRite, how are ya'll handling Grain Matching/Perfect Graining? By default, it seems that Microvellum adds the grain matching info that CutRite needs ("2DRW:1", "2DRW:2", ect) to the finished facesmulti pass tools converting to woodwop mpr with single vertical trimming not multiple
does anyone know how to make Microvellum multi pass tools convert to woodwop mprs in single operations and not multiples as it is does. Example if I have a 3 pass multi step tool it comes up as three seperate vertical trimming commands. Can there be aGiben .AD file
For years we've been running Giben saws with .AC files, and although we've had .AD files at the same time I don't believe they were ever required. Now we are setting up a newer Giben saw (ICON 2) with GDrive software instead of G57, and assuming due toFeature request - Add "Floor" Global and update finish face formulas to include it
Current Foundation Library Requesting that this be implemented by the Development team as the solution presented below will get overwritten with library updates. Problem, Rounding down the width and height dimension of doors/drawers to the nearest incrementMetal Laminate
Have any of you figured out the truck for cutting panels with metal laminate on a CNC router? Looking for what you have done to keep bits from loading up and or foiling on the face if cut face down. Formica Decometal, MDF core. Thickness varies. SomeCustom Toolbar
One of the workstations is missing the custom toolbar. Where is the setting to bring it back? Thanks! JasonNext Page
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 26.1.0422.641
We are happy to announce that Microvellum build 26.1.0422.641 is now available! This build includes resolutions for issues with product dimensioning, associative machining, grid view within the processing center, sawing reports, and more. A new optimizationNew Microvellum Release Available Today: Build 26.1.0529.641
We are happy to announce that Microvellum build 26.1.0529.641 is now available! This build includes resolutions for issues with docking sizes, the formula editor, sawing G-code, and more. Please refer to the complete Release Notes for more informationNew Foundation Library Release Available Now: Build 26.0527
We are happy to announce that a new update for the Foundation Library, build 26.0527 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Now: Build 26.1.0520.641
We are happy to announce that Microvellum build 26.1.0520.641 is now available! This build includes resolutions for issues with room names, the find and replace feature within Workbook Designer, item number scaling, and more. A new option has been addedWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: