Fillers on wrong layer
I am noticing that my fillers are coming in on the 2d dashed layer. How would I change what layer they are placed on?Lookup Table Functions
I would like to know if I could have a formula reference for a local prompt to determine which block to use when cutting a 2d section.Pull location on drawer fronts
I am in the process of testing out the Foundation library to hopefully change over from the component library soon. I am noticing that in the Globals of the foundation library there is a setting called "Drawer Handle Distance From Top". I have this setPart not showing correctly after a cut out
Hi There, It is my second time I am seeing this problem recently. So i have a regular rectangular part. After making some cutouts in the center, the part is shown incorrectly with only the cutout part visible not the rest of the part. Anyway I can correctWorkflow, Standards, and Discipline w/ MV
I am curious to learn what other people do for their workflow/standards when modeling and creating projects. I have been using MV for almost 3 years now and I did all the modeling and drafting from zero experience until we hired someone around my oneFormula Material thickness at project level actively affecting thickness in other projects
We are experiencing an issue with our formula material, both in the library, and in existing projects, having the incorrect material thickness. The formula material thickness is set by a Wizard prompt when creating a project. The issue is that every newSeismic / CSIP standards
We are just getting started in MV and were wondering if anyone has created a method for predrilling the required pattern of holes into the backs of your cabinets to meet the Seismic(NAAWS) / CSIP requirements?1.5" materials automatically get 3 border route passes at different depths
Hello, When working with 1.5" materials, I have a separate processing station where the border route on all parts gets a double pass with the first pass being at 3/4" and the last being full depth of course (this can be done in the processing stationIs there an easy way to have all of the Product Qtys in a room adjust per a Room Qty ?
We have had times where we want to put a quantity of 10 on an entire room. We set up a Room Property that lists the Room Quantity in our title block. Then we apply a qty of 10 to each individual product in the Product List. However, it is easy to missTouch-to-print Product Label UI
Is there functionality in either Toolbox or MM where shop personnel can click to print a product label at assembly? Similar to click to print parts/entire sheet from optimization results in MM. Essentially looking for a quick method of printing singleNew User Training
This is half question, half rant. What are you folks doing for new user training? What qualifications are you looking for when hiring that you feel will translate into a successful employee? The last couple of folks we have hired have not panned out veryAnother SMT Question "Foundation"
I'm working on a Die Wall with an unusual Face. I have set my Plates and the Nailer Transition Top to reflect "Extrusion Apply Machining"(True) and the result is not what I thought it would be. The Dado for the two plates did not cut the dado for theShelf Equal Spacing - Non-handed Gable
I'm trying to make a non-handed (universal) gable and my adjustable shelf spacing is equal however my lineboring isn't. What's the best way to go about adjusting the line boring locations so they are the same dimension from the top and bottom of my gable.Anyone know how to get the same global variable from different spec groups in a report?
I'm able to pull a Global Variable and get it in the report just fine, however what if I have 2 or 3 Spec Groups? How do I associate the global variable to look for that specific Specification Group? For this test case my global variable RHB_Wood_SpeciesItem number text style
How do I change the item number text style for my products?Rear Shelf Pin Hole Settings
Is there a global setting to set the parameters of rear shelf linebore for rear shelf support? I cannot locate any such setting and I have seen it happen automatically when the width of the "max shelf span" is reached. Is there a stand alone setting toAdding 5 Piece Door
Hello, I need to add 5 piece door. How can i do that?ACAD 2024
Over the last few days, I have been digging into how ACAD and AI have been working. Just out of curiosity does the new ACAD 2024 of MV use the tools listed in the referenced link? https://www.autodesk.com/products/autocad/featuresNew Toolbox Release Available Today: Build 23.1.0908.641
We are happy to announce that Toolbox build 23.1.0908.641 is now available! This build includes several resolutions for issues with certain tokens in associative machining, problems encountered during the process of peanut machining, and the appearanceMV Performance and Visual Issues
Is there a reason for slow performance on Microvellum and having graphical issues when producing PDF? Constantly, viewbase stops working and doesn't update the products, whether I remove objects or add, it stops updating. I get it to work turning off,Boring Divisions all the way through
Hi, I was wondering if someone can point me to the right global setting to change the boring on divisions. Right now the program wants to flip the part. I would like for it to bore it all the way through if the shelf holes match on each opening. example:Border Route depths
Are border routes controlled by the processing station only? The following example cuts through, despite showing a 1/16" skin unless I set the processing station to leave skins:Part Drawing Tokens
When in the part properties, with the drawing token tab selected, it would be nice to right-click in 3D Draw Token: and 2D Draw Token: to have the token list to select from instead of having to come to the community site to find what token is needed.New Foundation Library Release Available Now: Build 23.0828
We are happy to announce that a new update for the Foundation Library, Build 23.0828 is now available! The latest release of Microvellum's Foundation Library includes resolutions for numerous issues, including drilling issues in certain products, functionalityLamello Furniture Connectors Now Available in the Foundation Library
Microvellum is happy to announce the integration of a set of 16 new furniture connectors from two Lamello product lines into the Foundation Library: The Cabineo cabinet connectors and P-System Clamex connectors. To access these new connectors, open theOVVO Tech Panel Connectors Now Available in the Foundation Library
With the most recent Foundation Library release, 7 new panel connectors from OVVO Tech have been added into the Library, granting clients the ability to implement a set of adaptable, universally easy-to-use connectors with Face Boring, End Drilling, Doweling,Looking for an engineer!
Looking to hire an experienced engineer to create shop ready program packs in Fresno, CA! Please send resumes to [email protected] Open to remote workersNested Base Processing Station Settings
Hey all, I am trying to get some quicker speeds out of our CNC and have been playing with the processing station settings trying to find a good blend. Currently we have the attached picture as settings but it seems sort of slow. What are others doingHow do i add a Global Machining Token to specific parts?
I am currently producing cabinets with pilot holes and applied backs. In the default setting in Microvellum i only get pilot holes on the top and bottom of the back which would have screws placed into the bottom edge & the top stretcher/upper top edge.New Toolbox Release Available Today: Build 23.1.0901.641
We are happy to announce that Toolbox build 23.1.0901.641 is now available! This build includes several resolutions for issues, such as problems with barcode generation using certain Toolfiles, an issue with bulge direction in drawing tokens, and roomsRouter Spoil Board Penetration Value Keeps Reverting Back
Since updating to Build 23.1.808.641 from 21.X The Router Spoil Board Penetration value keeps reverting back to 0.01 which is -0.25mm. We had it set for -0.2mm or 0.00787" once converted to metric. We key in 0.00787" And it changes back 0.01 once goingLooking for help with Custom Prompts to be added to a report
Hi, I've been trying to add some unique prompt values to some reports but they always result in blank or 0. I checked the Master Class and added relations. I'm following similar steps that I took to add Global Values which work great, but the ProductSetting Drilling Speeds
Is there a way to specify the drilling speeds for drilling? We are drilling drawer fronts with the drills boring all the way through the drawer face for the handle. We are getting "blow-out" on the opposite face due to the drills being set to Slow-FastSeeking Microvellum Engineer/Draftsperson For Immediate Hire
Architectural millwork company seeks an experienced draftsperson/engineer (familiar with cabinetry & traditional woodwork). Knowledge of Microvellum, AutoCAD, MasterCAM, Autodesk Inventor, will be a plus. Benefits Offered:401k, paid vacation and holidays,Microvellum Made Easy: Understanding Cutparts
Hey all, I'm starting a new video series: Microvellum Made Easy. We've published the first video, on Understanding Cutparts. The goal of this series is to walk through in a series of videos the basics of how microvellum works behind the scenes, to beWire Pull Location
I am drawing some cabinets with horizontal wire pulls (4" straight wire pull). The 3 d views look good but the 2d elevation on the wall cabinets is placing them in the wrong spot (base cabinets work fine). You can see on the base cabinet doors, the pullSolution to drawer calculator issues Part 2 (Component Drawers)
Here I will try to provide instructions on how make "Component Drawers" more useful and easier to modify locally. I highly suggest you first read my other post "Solution to drawer calculator issues Part 1 (Individual Subassemblies)" to gain context forMicrovellum Foundation Library Release Notes | Build 23.0810
What does the development team mean regarding the "Lift-Up Doors" now have 2D Plan Drawings available and how to make use of these drawings? Resolutions Lift-Up Doors now have 2D plan drawings available"Foundation" Smart Layer Manager Stretch/Grip
It would be nice to have a stretch/grip on the inner windows so that you can view a more extensive "Extruded Entities' list. BEFORE STRETCH AFTER STRETCHOpen Base cabs
Probably an obvious fix here, but,,,,,,, ive drawn an open cabinet and when i nest it, the face material is allocated to outside and not inside the cabinet. is there a setting somewhere i can change this, i would assume an open cabinet would automaticallyNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Registration now open!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Foundation Library Release Available Today: Build 25.1121
We are happy to announce that a new update for the Foundation Library, build 25.1121 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Toolbox Release Available Today: Build 25.1.1204.641
We are happy to announce that Toolbox build 25.1.1204.641 is now available! This build includes several new features added to enhance the usability of the Toolbox login and About Microvellum interface. Additionally, the "Rotate Parts In Nest" featureNew Toolbox Release Available Today: Build 25.1.1120.641
We are happy to announce that Toolbox build 25.1.1120.641 is now available! This build includes resolutions for issues with various parts of the interface, errors associated with redrawing products, copying data, and Microvellum's Beta Optimizer. PleaseNew Toolbox Release Available Today: Build 25.1.1107.641
We are happy to announce that Toolbox build 25.1.1107.641 is now available! This build includes resolutions for various issues with the Beta Optimizer, subassembly names and prompt values, extruded products, and more, as well as improvements to certainIntroducing the Next-Gen Optimizer: Now in Beta
We’re excited to introduce a new generation of optimization tools—now available in beta. This release marks a major step forward, featuring an all-new optimizer built from the ground up with a modern, flexible architecture and a powerful genetic algorithm.
Follow us on: