Parts Get unhidden on Redrawing
When using part properties to edit a cabinet, if you have parts hidden, make your changes and redraw, once its redrawn all the parts that were hidden, now get shown again. Interestingly it only show the parts again for that cabinet, everything else hiddenAdd the ability to adjust the scale of 2D section hatched material
Can we add the ability to adjust the scale of the default hatch selections from the material file? This would assist with some of the differences that are showing up between BSB and OEM and allow a little flexibility on how the predefined hatches appearShow Material Visualization for Faces and Edges - Rendering and Modelling
With Bricscad, I'm seeing more customers moving to a realistic or xray mode for their day to day use. Currently the material used for rendering (or xray or realistic modes) are driven by the layer names. There's no option currently to show the edgebandGlass Door Not Working
Library 25.0813 Anybody had this issue with selecting a glass door. Either via product prompt or door sub prompt I get the same googly gop error message and cabinet goes into the abyss.2D Section Material Hatch in BSB
The hatch for material on 2D sections using the MV material file for particle board is significantly different in BSB than OEM. In my opinion it is currently unusable in its default state on sections that utilize a drawing scale of 1" = 1' as shown inAngle Room Sections Not Drawing Everything
So first time working on a room that has some angles and when i go to draw a section the only thing it draws is a single region of the end panel. Im figuring it has to do with it being on an angle, i just dont know what to adjust to get it to draw theAdding a Drop-Down Box Into Prompt
How do I change my 'Drawer Box Depth' into a drop down? Right now it accepts any value but we only have box sizes 9|12|15|18|21|24|27|30. I'd like to create a drop down box with these values.Add Chamfer to a panel edge
Hi, I want to apply this chamfer to the border of the piece, how do i go about this? I dont want to add a machine operation to each straight edge and have loads of leads in and outs as MV nesting cant handle that appropriately, so it needs to be one borderFace Frame report errors
I keep getting face frame report errors, consistently with blind corner cabinets. Issues are wrong sizes for the centre stile, missing the top rail in the image. This is a out of the box cabinet with a top drawer adding, and changed the blind corner width.BSB Not Responding
BSB: 25.1.826.641 Dataset: 25.0813 I'm trying to get a simple 3D flatshot having tried 3 times now. Having to end task to stop the program from hanging. Files was created in BSB and all drawn in BSB. Now having to switch over to OEM to get it done. Very[ENHANCEMENT] More Prompt Data Types
I love that so many users are putting out exciting ideas to make MV better. I have a sense that many of the wishlist ideas out there are beyond the scope of near-term software update planning. One idea that might not be as difficult to implement wouldFeature Request : Product Prompts UI Customisation
Wouldn't it be great if we could customize the Product Prompts UI even more, adding images and positioning prompts in different places to make it easier for end users to navigate the product interface? Current Interface: Interface Customisation Idea:Transferring Project - Losing Paper Space Views
Hi, I am used to using model space for all views and annotation but current workflow necessitates using paper space for this with viewbase. The issue I am experiencing is that when I export a project and import onto another laptop, I lose the views. IsFormula Driven Materials
Hi Everyone, I’m currently setting up formula-driven materials and adding all the board types into the lookup table. I feel like there’s a better way to manage this, especially in the Cut Parts Wizard. I’d love to improve it by adding dropdowns for theBSB Publish error
Everytime i try publish from BSB i get this error, anyone have a solution?BSB Toolbars
How do i get the measure tool on the top toolbar, i have absolutely had enough of going back and forth between the modelling and drafting just to measure something and or then change the view type from wire to hidden etc.Wood Drawer Box with no Machining
As the title says, I'd like to only cut the borders of my wood drawer parts that are typically dadoed together. It's easier for my guys to run their own dados on a table saw that is always set up for drawers after being on the CNC. I tried setting theFeature request/user testing for PLINE converter tool
Most people are aware that using the draw in 2D command lets you draw vector shapes, lines, arcs, etc. on a part, which then creates one or more machine tokens in that part's properties with all the point data from the drawing. A lot of users will alsoHow to Delete Specific Blum Antaro Drawer Heights
Hi Gang! I would like to delete Drawer height K and D-Double Rail from Antaro Drawer Height options. As you can no longer buy them in AU. I've looked through all the spreadsheets and design data and can't find what I'm looking for/too scared to changeRoot Element is Missing
Hi everyone. I hope you can help with this problem that I encounter just now. I was just doing a project when an error suddenly pops-up. The Toolbox closes and now this error is showing up when I'm trying to re-open the program. Here's the error scrAuto Unit Conversion In Microvellum/Innergy Design
In Microvellum & Innergy Design it would be nice to be able to use any unit type in any entry box and have it automatically convert it to the current unit, so if you are in Inches but you had a metric measurement for a feature you could input 127mm andHanging Rail DWG file
Hello MV world! I need to substitute the default Hanging Rail drawing with the actual one we use in our company. Ideally I just want to swap the current 3D drawing to the one we use, keeping the origin the same so the formulas stay intact and the product/drawing2D PLAN VIEWS - How do you create them?
We are working on setting up the foundation library and moving away from the Legacy (Component Library) and are updating some things along the way. One thing we are curious about is how people do there 2D plan views for Casework? As we currently utilizeAdding Corner Radius to Standard MV Door
Hi everyone, Does anyone know how to add a corner radius option to the standard M door in Microvellum? I can’t find a setting for it. Any tips would be appreciated!BSB Highlight
I am finding products remain highlighted after moving (MV move). Setting highlight to 0 does not seem to make a difference. The only way a can remove it is selecting the product a second time (without any mv function) and hitting escape. Is this a bug?What is actually included in the Design only Microvellum
I was thinking of getting Microvellum design only for the CAD and Microvellum. What is it actually. Does it have all of the feature and libraries of Microvellum, the only difference being you cannot create Work Orders? Or is it stripped down version toCompact/Shallow cup hinges and where to find them
I have worked around this in the past in a pinch, but are there shallow cup hinges in Microvellum, I have been getting around the issue, but want to know if there is a proper solutionitem # scaling
I'm setting up standard scaling moving from annotative. I have everything working correctly except the item number which comes out very large. Anyone no where the variable is that controls this? I'm in the latest version of the foundation library ThExporting Library Specifications and Configuration
Hello, I just hired a remote employee and would like for their Microvellum to be set up identical to mine. I've made lots of changes to my global specifications and have changed things in the excel workbook files so that the shop drawing process is quicker.While Loops
Hey all, Have any of us figured out a way to almost do a while loop? I often find myself writing products/sub-assemblies and almost always feel like I want a while loop/for loop. I know there are many functions that do very specific things, and I useFeature Request: Pass an attribute to dynamic blocks in the DRAWBLOCK token
It would be nice to be able to pass values to an attribute on a dynamic block through a parameter in the DRAWBLOCK token. Example: A dynamic block with a attribute tied to a stretch property, or state condition like visibility. Basically, it would replaceBricsCAD MEASUREGEOM Alternative
In Autocad, all i had to do was press a button for MEASUREGEOM RADIUS and i could click any 2D / 3D radius i wanted and have it display in the command line. A tool we used hundreds of times a week. From what I can find, there seems to be no such optionBSB Plotters problems?
I've got a few questions for other Toolbox OEM users who are now testing and configuring Toolbox BSB. As the main user/administrator in my company, I installed, configured and did testing of BSB including creating a new template, new PC3 files since ACBricsCAD Sheet Set Manager
Does anyone know of any in depth resources for BracsCAD's SSM functionality? I've exhausted my google-fu, and can't locate what I need in the docs. Our main issue is in basic functionality. Our normal work flow is laying out all of our views and creating/namingTCount - Renumber Text
Ability to sequence text/mtext numbering. I believe something like the TCOUNT command. This would be useful for outsourced drawings. I don't believe this currently exists?2d Section Planes
We use a lot of 2d section planes for our shop drawings. In BricsCAD when I create a 2d cross section I am getting two(2) different hatches. In my section settings I have chosen solid as my predefined hatch. However as you can see in the attached screenHardware Token Issue - Button Fixings
Hey guys, Having an issue with the button fixings, For a fixed panel on a cabinet it works as intended When I add it to another panel on a product, it comes in on the front instead of the back. No issue, I just -10.5 or whatever I need to do, then forWhere is the Microvellum Toolbox Menu in Toolbox BSB?
Where is the Microvellum Toolbox Menu in Toolbox BSB? If I am using the wrong terminology, the menu I am referring to has the Project, Modify, Draw options, etc.Calculator for multiple references?
Hey guys, The product I'm building has panels to go either vertical, horizontal or both. When in product prompts, righting clicking to bring up the calculator for some reason only the vertical variables show. I've noticed on say a pigeon hole unit, theBricsCAD Highlight setting
Is anyone else having issues with the Highlight setting in BSB reverting to 'on' every time a new drawing is opened? I've lost count of how many times i've set this to offNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: