Face Framed Cabinets
Hello, I have a question about face framed cabinets. When "Door-Drawer" and "Drawer Bank" are not using frame mid rail but we keep the stretcher. Is there an option to move the stretcher 1/8" back from the back of the door/drawer front and have stop dado?Workbook designer "L"
hello, I'm trying to add another option to the "Left End Condition" and "Right End Condition" on the Workbook Designer Local (L), on the "Prompts" tab but it does not keep it. I make the changes, save it, and go to the cabinet prompts and the changesSlide Machining For Drawer Box Member
We noticed that the default way MV handles drawer box slide machining includes only the carcass but not the drawer box machining side, for us it is no big deal to do the face 6 flip so that is what we are used to doing. We ended up modifying the woodHas anyone created a bench product with a lift up top?
I am curious the best way to approach this. I started with a box end product with a Face Frame on the front, and I plan on using a ladder kick for install. How would/should I add the lift up top with hardware? Using a finished faces subassembly with theConstruction Method Missing
Quite common on divisions is the construction method not following through, as you can see it is set to dado & Screw, but is not dado'ing like expected. ThanksVauth Sagel Bins
Hi @Lenny Scianna, Do you know if the Vauth sagel range of bins (VS ENVI SPACE) are planned for library development in the near future? I was going to create our own but thought it would be worth checking Thanks!“Hinge plate offset from side” is incorrectly using the “Hinge distance from side” value as the plate’s distance from the door edge. (for blind corner hinges)
There’s an issue with the blind corner hinge plates. The “Hinge plate offset from side” prompt is tied to a lookup table value that only references the hinge distance from the side (22.5), and the system then applies this in the opposite direction toShelf Clip Gap
Can we have a lookup table to determine the shelf clip gap based on the name of the clip. A lot of commercial millwork companies will use a Shelf pin and the Hafele double locking shelf clip. These require different gaps. When you change the clip, itDivided Drawers
User specifies the number of divisions left to right and front to backDowel in the front drawer box part to align with the drawer front - does anyone does this?
Team, I am having this challenge. How can I perform a dowel operation on the front of the drawer box?corner filler pick two walls
i'm trying to modify the foundation upper corner filler product so you can set the filler size for both left and right filler (right now its just one prompt that controls both) when i save mine back to the library under my category i lose the option toHow to add lead-in to virtual route
Hey all, Curious how to write lead-ins for virtual routes. I use them a lot, and admittedly, I've yet to figure out how to write lead-ins for them. I know I need to set the PLINE parameters to 0;0;1;0;0 (or something like that, I know I have to tell itControl Type Data
Anyone know if there is a character limit on this? Option 1|Option 2|, etc, etc. Getting an invalid formula, and the only thing I can come up with is a character limit. Also, if that's the case, do you know what the limit is?ElvNoOutline System Prompt
Is there a way to manipulate the size of the outline? Typically it just seems to go with the overall product width & height, but have an older product where this is not true (or so it seems). Would be helpful to be able to adjust this for suspended productsDrawer - Base Cabinet - Drawer Division not Update the Drawers size if it doubled
Team, When using a double drawer division, the drawer size is not updated, causing the drawer to be inside the division. Also, it is doing only dowels on the front stretcher, not on the back. 25.1.826.641Identify EB Edge by using the Dowel location
Team, This may be a crazy thing to do. I mentioned in another Topic that we are having trouble identifying which side of the stretcher applied EB. What about if we can use the doweling position in the stretcher to identify the correct side? What I wantArched Face Frame not working on Single Cutout Frame
I am having an issue with arches on a face frame. They are working completely fine with stiles and rails but not working when switching over to the single cutout frame. See images below. I can manually do it I guess but just seems as if it should be workingPost Laminate Carcase Separate From Doors
Is there a chance we can separate post laminating the carcases and doors? Every time we run an update, we have to save the finished faces subassembly and uncheck the subassembly prompts "Front Post Laminate" and "Rear Post Laminate"Nailer Match Interior Finish with No Back
If we turn on "No Back" on back construction, the nailer material stays the same as if there was a back on it. Can we adjust to match the stretchers or something like that to match the interior finish with that situation?How to export all hardware in a spreadsheet format
Does anyone have any info on how to export my hardware that is in my material file in a spreadsheet format? I am trying to get a complete list of all hardware in our library.Nailer Machining Turns off with Finished Ends
When finished ends are turned on with screw machining, the pilot holes turn off on the nailers, but all of the other pilot holes stays on. Can this be adjusted to turn on at the finished ends? We post laminate are cabs after we fabricate, so the screwAdding/Copying Parts from on Subassembly to another
Is there an easy way to add multiple parts from one subassembly to another subassembly? I know I can copy and paste 1 part at a time but that's going to take forever with the parts I added and to which subassemblies they need added to. Thanks!Hardware Machine Token Issue
Hello, Anyone have issues with machining not working on associated hardware? - Have associated rotation. - Hardware located within associated part. - Tried both positive and negative values for X, Y, & Z. - Have a bunch of other hardware that works justThe Formula for crown molding is wrong
By default the height of the Crown Molding/cornice is looking for height alone. This fine for probably 99% of the market i guess, but ive changed to read the actual global variable so its now correct with our setup as our isn't flush to the top of theFEATURE REQUEST - Workbook Designer Column Descriptions
It would be great if there was somewhere inside of Workbook Designer where it would display the name and description of what each column in each workbook is. Even if this just had to be a help button of some sort that would trigger a pop-up with thisFEATURE REQUEST: Make Salice Hinge Options Match the Nomenclature in Their Catalog
It would be great if the Salice hinge names in the hardware selections actually matched the names in their catalog. For example, instead of "6HT" have the name state the height of the plate.Last Toolbox OEM Build 25.1.0616.641
Hi guys, we are moving to the BSB asap but there are still a few project going on OEM and (of course) we've missed the downloading window (20/07) for the latest build (Build 25.1.0616.641). I've opened a ticket last Friday (18/07) on something that was"F.D.M." (Formula Driven Material)
As an individual who prides himself on "Forward Thinking" and ascribes to "Technological Advancement", I wish to gain feedback from the community, regarding the current use and or consideration of implementing "FDM" into your "FL Library Build". I wouldToe Kick notch doesn't turn off
Since the forum is very active at the moment with support staff i have taken to posting all my problems here as i'm getting better results. Case i created almost a year ago Still isn't fixed when the problem was introduced. Case number: CAS-55822-W7T8V4.Cabinet disappears when using part properties
When editing cabinets in part properties, but whilst looking at the nesting to see what to edit, if you "save close and redraw" whilst the nesting tab is the one open, it will place a drawing of the cabinet in the nest, and not redraw it on the main drawing.XPARTDATA Fields but for Hardware instead of Cut Parts
Hi Everybody, We've been adding XPARTDATA Fields to all of our Cut Parts using this link as a guide: https://community.microvellum.com/portal/en/kb/articles/extended-part-data-token-xpartdata-overview-reference#Generic_fields_available. My question isBSB Quad MV Cross Section has wrong command
In the BSB Quad MV CUI MV Cross Section calls the wrong command, how can we change it? currently the command is MVCROSSECTION should be MVDRAWCROSSSECTIONG!Filler_To_Floor is this a missing global variable
Just started messing with the Foundation library. Ver 25.0813 the Scribe filler sub assembly is referencing a global variable, but it is not there. Is this missing or is the Subs reference incorrect?Feature Request: DRAG and DROP
Is the "Development Team" considering implementing Drag and Drop of products, for use in BSB OEM?FEATURE REQUEST - Make Custom Hatch Field Work With Formula-Driven Materials
Right now it seems that the "Custom" hatch field for materials isn't exposed to the Formula-Driven Materials system. It'd be nice if it was, can't really use it for FD Mats without that unless you're willing for them to be inaccurate half the time. It'dÀ la carte updates
I find myself wanting some features from Foundation Library updates... but I don't want them all. Could we have the option for à la carte updates? Pick and choose which part of a Library update you want to apply. For example, that new drawer slide, justEQV Function. HELP
I am trying to build a custom door style with multiple vertical slats spaced evenly. I found the EQV function is *almost exactly what I need. I have one row in my CutParts with the slats and I'm using the EQV formula to space them evenly. The problem"Countertop Straight" material selection for backsplash?
So I turned on the material options tab in the standard MV product for 'Countertop Straight" in the 24.0520 foundation library. It only gives me the countertop material and no option for the backsplash material. One would think it would make sense toGlobal References
What's the best way to find if a global is referenced anywhere in the products, subassemblies, etc? Wondering for housekeeping purposes.Toolfile Cell Format
Any idea on how to change the cell format in the toolfiles? Text color, etc.Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Registration now open!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: