Feature Request: Room Prompts
It would be great to have the ability to set up Prompts that are like the Global prompts but for the room specifically. The spec groups do most of the heavy lifting and paint with a broad stroke which is nice it almost every use case. Some times yourError when creating section views
Hey All, I get this error when trying to create a section view of a cabinet Instead of creating a typical section view, these elements are created (in the volume of the cabinet). These are the section drawings tokens. My guess is that they are not beingBSB Publish/Plot Job
Is there a certain way to publish a job through BSB? Normally in OEM, we just selected all of the paper space tabs and just publish the job. BSB I can't do that. Also, anyone else having weird issues with the "Publish" Button? If I left click it, it justMove Dowel holes to centerline of part
I want to move the dowel holes on our drawers to the centerline of the part. We use 5/8" for our drawer sides. The hole placement is 0.375", I'm assuming its getting that from 0.75"/2 I have looked in global settings and also the machine token, but IProvide an easier solution for external IT teams to implement a server setup with minimal errors
I think this should be priority #1 on the development list. And also revamp the data access tab in options.FEATURE REQUEST: Ability to Read/Write Formulas in C#
I would like an interface that would allow me to convert the existing Microvellum Excel Formula into a C# Formula for editing and convert a C# Formula into an Excel formula for use in Microvellum using AI. I would like to be able to open an AI windowneed help with 2d instructions
so i spent some time getting our 2d instructions set up, we just did an update and lost those changes i made. now i'm trying to save our own 2d instructions as a new subassembly and change G!Drawing_2d_instruction to the name of my new subassembly. itFEATURE REQUEST: Enhanced Sections
The Draw Sections tool is okay, but it could be better. It'd be nice to have an additional distance setting that would be used in more of a SECTIONPLANE/BOUNDARY type section. This would allow the user to create a cut in a section and only have the partsCtop elevation/section
We are on the 25.0319 library, our countertop product was hard for me to figure out. I was able to get the elevation to show correctly with the correct 3/4" material by adjusting the thicknesses_countertop in the subassembly after some trial and error,SQL CE Viewer
What's the procedure to save changes? I had a few products unlinked.Saved updated Sub-assembly to template.....How do I apply these changes to an existing project
I have been making updates to some of the sub-assemblies and products in our library. For example: I added a 3rd drawer spacer to the "wood drawer box" sub-assembly. I saved this sub-assembly change to the template When I create a new project all of myFEATURE REQUEST: User Defined Separators for Formula Driven Materials
This was discussed in the Focus Group about the Formula Driven Materials, but I wanted to formalize this request for having user defined separators for the Formula Driven Materials. Currently, the Formula Driven Materials use an underscore "_" to separateMicrovellum peAk Recordings Missing Chat/Q&A
In watching a couple of Microvellum recordings in peAk for the Release Reviews and Focus Groups, I noticed that the Chat/Q&A was not recorded along with the main screen. The Presenters were answering questions that were showing up in Chat/Q&A, but I couldn'tCurrent Microvellum Layers
Is there a KB Article or Library Release update explaining the purpose of the added layersDRAWING ONLY OPENS "READ ONLY"
I was working on a room when toolbox closed unexpectedly. When I tried to reopen it, it would only let me open as read only. How do I open it so I can finish editing it? I have tried to restart toolbox but that didn't help. And no one else has the drawingBuild a Box Video
I was watching a video by RJ and he mentioned viewing a video called "Build A Box". Does anyone know where it is located. I cant find it?Applying Solution to Multiple Products
Newbie here For integrated finished ends, our shop adds a small dado to retain the back of the cabinet. I wanted to created a parametric solution I created a feature check box in Project Wizard I created conditions in the product design data to updatePlease help
OEM Build 25.1.129.641 Foundation Library 25.0319 Is it possible I get this because it didn't install correctly? I had a ton of file names that were too long so I just skipped thru them during the install process. I can change layers just not in theLost my ARCHITXT.SHX font and dfd-bold.shx
Hello, I've been using microvellum for only 2 weeks so I need your help lol. I work in Quebec so i have to use accents on some letters and i normally get them by using combinations of keys but it wasn't working even though my keyboard was set to frenchToolbox BSB - Final Conversion
Can someone please confirm what happens when I click "Final Conversion" for Toolbox BSB FLA Subscription? Does my Toolbox OEM FLA Subscription stop? Or will Toolbox OEM FLA Subscription continue as long as we keep our Toolbox BSB FLA Subscriptions? Iimport 'component' based products into 'foundation' environment?
Is there any option to import custom products from a component based library (v050.7) into the foundation library system? I have a good many custom products, a few of which would not be easily replicated. Thanks! T.Web Page Feature Request
Is there any way possible when finished reviewing a forum post having the page take you back to where you were down the list instead of starting back at the very first post? Extremely annoying when you are a couple of pages into looking through the forumsPlugins For BSB
Where do we stand with plugins for Brics? They have one called communicator which allows for more 3d file types. I need an account with them to download it and dont have one that has a copy of the software attached to it, and when i try install the pluginArticle Save button?
Team, Can we get a SAVE button to save articles for later? Who says yes?Toolbox AC for AutoCAD 2026 ??
Any update on Toolbox AC officially supporting AutoCAD 2026?Build Request: Toolbox OEM 25.1.0616.641
Greetings Everyone! :) We were hoping to get our hands on the last build for Toolbox OEM since Bricscad BSB subscription has been launched. Since the autocad licence ended, MV is unable to provide this update as the deadline has passed.. Would someoneHardware Machining Holes
Is there a way to update / change the holes that are created by this drawer spacer? The hardware part is Blum Tandem Slide Spacer. I don't see any parameters to change the holes in the design data. I can't make any changes to the holes in "draw part in5 Piece door is showing gaps between rails and stiles
There is a gap between rails and stiles on a 5 piece door The tongue length measures at 0.5" (needs to be 0.375") . Which is causing the overall rail length to be 0.25" short In the "S" workbook, the tongue length is set to 0.375". If I change it to 0.5"Choice: Toolbox AC or Toolbox BSB
Hi Community, It's been 3 months since BSB launched, and I have put a lot of detailed feedback and done massive search regarding whether we can transition our team's heavy muscle drafting memory from AutoCAD to BricsCAD, and we are still struggling, asCross Section Wall
I would like to turn of the Cross Section Wall. However, turning off the 2D_Section Layer, will hide all Geometry. What "Prompt" controls the Layer for the Section Wall.New Microvellum on BricsCAD User - Challenges with AutoCAD-centric Training
Hello everyone, I'm a new user working with Microvellum on BricsCAD, and I'm finding the official training videos, particularly those in the "Plan to Production" playlist, challenging to follow. The videos are great, but they're demonstrated in an AutoCADDrill bit "Type Info"
Right now our CNC's have 5mm brad tip bits installed. In my other CNC's at other companies we opted for V-tip bits so we could drill for pulls without blowing out the front faces of the doors. I don't recall this 'Type Info' setting in those tool filesTemplate Time Stamp
Strange, I have a template with a date in the 1600's. Anyone else experience this? Wonder what life was like working with a computer in that Century.Cloud Enabled Workflows
--Was recently approached by a freelance drafting firm making the following claim: Although I've set up remote access via VPN, RDP, etc. in the past, this is the first I've heard of MV natively supporting it. Is there any truth to the above claim or isFEATURE REQUEST - Project Specification Group In Use Message
When editing Project Spec. Groups it is possible for more then one engineer to have them open. This can cause the changes to be over written due to the caching of the data when the editor is opened. It would be nice for those of us that use SQL SeverFOUNDATION ADA Sink Angled Frame - Bracket 3D Controls
For the life of me I cannot find where the 3D for the ADA Brackets is hiding within the prompts of the Foundation ADA Sink Frame. As in our Foundation Library the A&M Brackets draw in 3D just fine but the Rakks ADA Brackets do not draw at all in 3D. IToe Kick nesting
Does anyone know why the toe kick nesting notch now does this instead of just cutting a square out? It feels wasteful in nesting time, and I cannot find the setting to turn it off.Toolbox Error when importing pdf's
Hello, anyone dealt with this kind of error? It happens when I import the second pdf. After the message Toolbox crashes. Thanks.brics cad viewbase
hey all does anyone know how to remove the view outline in the view base in brics cad see attachedHow to scale the UI?
We are using OEM and some of our drafters are looking to get the UI to scale a little larger so its easier for them to see. Is there an easy way to adjust this for them and scale some things bigger?Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Design & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnHappening This Week: Microvellum Focus Group & Release Review
We’ve got two product events happening this week and would love to see you there. Q2 Customer Focus Group - March 3 at 1:30 PM PST This is your chance to share feedback and help influence what we’re working on next. - Register February Release ReviewNew Toolbox Release Available Today: Build 25.1.0826.641
We are happy to announce that Toolbox build 25.1.0826.641 is now available! This build includes resolutions for issues with perfect graining and part placement, as well as various issues surrounding database usage, such as data association, copied productThe Foundation Library – A Unified Library Data Structure for All
For the last year or so, we have been working hard to develop a new library data structure to replace the cabinet libraries used by clients in various regions of the world. The vision of this initiative was to create a unified dataset that would enableToolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox and
Follow us on: