Full Time Microvellum & Rhino Engineer - San Diego, CA, USA
Tecture - Creative Design & Fabrication studio - is looking for a full time technical designer/engineer working in Microvellum & Rhino (Rhino training provided). See full details at link below. Apply through Linkedin or email Sydney Preish with resume
Where did the Custom MV Functions Go in the Formula Editor?
Are we no longer able to access and create formulas using Microvellum's custom functions? Or am I missing something somewhere? This is no bueno, if that's the case. Those functions are critical for development/maintenance of library products/parts. We
OEM Crashed and Library Reverted on My Machine
Anyone ever have this issue come up? Theres a ticket out for this but want to see if anyone has seen a fix. We are using the last OEM Update but stuck on 24.xxx library. I was creating a new project and updating the base Solid Material spec group so when
Microvellum Draftsman - NEWCASTLE NSW
We’re on the hunt for a skilled Joinery Draftsperson who knows their way around Microvellum and is ready to bring high-end, one-off joinery designs to life! At our core, we’re a young, energetic team driven by detail, creativity, and a love for truly
Sink Subassembly Cut Through Substrate
So I added a Sink subassembly to a countertop and itll cut out the top just fine, but it wont cut out the subtop aswell. How do i link the substrate to get cutout along with the countertop when the sink is selected?
False Sink Panels
Why doesn't the Sink False Panel follow the same rules for reduced rails as the drawer fronts? Can we get the formula updated to capture Bay Position 82, or should it just be considered a top drawer (Bay Position 60)? @Lenny Scianna
Project Materials Folder is Missing
Hi guys, hopefully someone has run into this problem before, Picture below shows project materials folder missing, This happens sometimes when importing projects, Anyone know how to get project materials folder back or to add a new one to a project? Also,
Attention QA "Parts List Icon", not working
The Icon is showing a totally different command execution. Please address.
Feature Request: Pin holes above adjustable shelves to lock them in
As per the title it would be helpful to have implemented a pin that can be drilled to sit above the adjustable shelves mainly in curved cabinets, to stop the shelf tipping forward as there is nothing else holding them in or up.
Color Labels only go to 4 characters
Hi all, We now have specification groups that go to 5 characters: PL10G, when our cabinets draw in 2D Elevation we only get the first 4 characters. Does anyone know how to increase that limit? Thanks!
Blanket Name Edit. Adding a Prefix to Names
I am creating a library and want to add a Prefix to names. In the example, I want to add the Prefix DES DR/DRW to all base cabinets with a door and draw combination. Is there a way in D.B.E. or Library Designer to accomplish this?
Feature Request: Prompt Color Customization
While I would still argue that giving shops the ability to fully "theme" the Light and Dark modes is ideal, I understand that it is a much larger undertaking than toggling between Light and Dark. The problem is the legibility of the prompt colors in the
Import materials at Project Level
Hi, See attached screenshot from the youtube tutorial. This works for the library level however is it possible to import materials to a Project level. If not possible using this method, Is there another way to import at a project level? Thanks
Bay Width Calculator & Material Thickness Changes
Hey everyone, Curious how others handle interior bay division locations in multi-bay cabinets when sheet material thickness is calibrated after design right before processing. We model products using nominal panel sizes (0.75''). When the shop measures
problem with materials
has anyone else had a problem with changing the materials in product prompts only to have a different material used when processing the products? seems that changing the materials in product prompts materials tab no longer actually changes the material.
Placing a tall cabinet doesn't render the parts correctly - Am I missing a setting?
Hi, My drafters brought this to my attention yesterday. When I place a cabinet and make it tall. The door should have a mid rail and two center panels. However it renders without the mid rail and just one large center panel (see below) The problem is
Where are my sides?
I am having trouble with one of my Spec groups. When I place a cabinet the result is a product that is missing the top , bottom, back and the drawer sides and bottom. When I opened the Parts List Review Those parts where not on the list. Also the placement
Add "Location" search to product list
I think it would be quite helpful to have a search bar above the Room (Location) tree in the product list. I often find myself clicking through categories searching for a specific room in our larger projects. And in large projects this can be slow as
Copy spec group function
Hi, Is there a way to change what is ticked on or off in the copy spec group components function? I have attached a pic I only want the wizard to be ticked on. Thx
Feature Request - Better Project Archiving
A recent post has made me think about archiving and the way it works currently and I think it could be improved. The request obviously is in a way that would benefit us, not sure about how everyone else does it but I would hope it would benefit a lot
Feature Request - Add Tool Defaults to Processing Station nest tab
Can it be looked at to add the Tool Defaults to the nest tab of the processing station? How I see this working would take a couple of steps. First this would be a check box to enable alternate tool defaults from what would be set as default in the toolfile
Face Frame Internals
Can we get some actual development on the internals with face frame, all i can ever do is get close and its just never enough. There are no actual options to make something like this, along with getting face frame sizes and drawings etc. I cant be the
Bumped out of place
Using the product bump command, it behaves in unpredictable ways. Is this a user error or software? I got wall panels I want to move against a gable end. Click bump command, select wall panel, select gable and it moves the panel over but also out front.
Customizing Wall Room Component
Before i start adjusting anything, i am looking for a bit more information. If i open the wall component thru the database explorer and add prompts and stuff to customize it better for what we need, will it get overwritten during a library update? If
Feature Request: Perfect Grain Toggle within Finished Faces Subassembly should look at material sizes
Within S!Finished_Faces: The method for checking weather or not to use perfect grain is slightly flawed. Sometimes we will use 5x8 or 5x10 sheets to nest the doors and drawers because of their sizes. There were occasional failures in this because of the
Uppers VS Lowers Default Construction
Is there an easy way to have different default construction between lowers and uppers? I'm having to manually change one or the other through individual product prompts. I could modify my project wizard to suit, but I'd rather not in case a library update
Microvellum Portal - Software Management Access (Unavailable?)
We’ve had reports that the Software Management section in the Microvellum Portal isn’t accessible for some users. We’ve looked into it, and it doesn’t appear to be widespread. If you’re running into this issue, send an email to [email protected],
MV Palette Auto-hide
I notice when my MV palette is not in auto-hide mode, I need to double click for each command. When in auto-hide, only a single click is required. Seems to have just started doing this I'm using Microvellum AC. Any others experience this, or is this a
Briss Cad Publishing
Anyone have a write up on publishing setups? Have a few setups, but yet to find one that allows me to use the replace page feature in Blue Beam without turning the page into mush at my wits end on this forced platform change Thanks Matthew
Setting Draw Tab default category
I set my default library category to my DES BASE in DBE. I would like to be able to set the Draw Tab default to be the Products Tab. It is set to Room Components Wall Any input is appreciated
New Sub got reverted
Im attempting to make a from scratch sub, cheating a little bit and referencing some similar items, when i decided i was done with them i delted it from the product itself in the sub assembly screen, in doing so all the work i had currently done on my
DRAWDIM Token
Is it possible to explain PARAMETER 9 better in regards to ROTATION ANGLE? Here is what I want to do ... The CIRCLES In RED are the X/Y Selection Points What I don't want it this ... and it's what MV DRAWDIM does 🤦♂️ Essential is this! I want HORZ to
How to remove the 2D sketches being attached to the 3D Models?
Without having to keep hiding and unhiding layers, is there something I can turn off so that when i place a product, its not attaching every 2D plan/elevation to it? I dont need to see every drawer finished face and drawer box drawn to the face of my
Inner Drawer / Rollouts NOT Drawing in Elevation Views
I'm sure this has probably been covered / talked about (maybe not and if so ... duh!) - But INNER DRAWERS / Rollouts in FL the GLOBAL VAR is MISSPELLED and does NOT drawing the dashed/hidden RECTANGLE! The default MISSPELLED var is Elevation Hidded Drawer
Combining all sub-assemblies into one full asm
Hi, I just wanted to ask if there's a way to combine existing sub-assemblies into a single top-level (full) assembly. For example: Top/Full Assembly name :Box_Cust Sub-assemblies: Box_1_Side` Box_2_Front` Box_3_Top` Each of these sub-assemblies already
2D Token elevation formula is wrong
One of the tokens for the 2d dimensions is wrong. It appears to be a face frame vs not issue again, us face frame users usually measure from the face frame overall size because applied ends would sit behind. And in this particular unit i do have a applied
FEATURE REQUEST: Create a 4-sided cutout machine token with the option of radiused corners
This machine token would get so much use I believe, if we could do away with the bulge list for a simple 4 sided cutout it would allow a simple parametric machine operation rather than quite a long vector driven formula.
Q3 Commitment to Stability: Update
Hello Microvellum Community. I wanted to share an update on where we are with our Q3 commitment to stability. When we shared our Q3 roadmap for Microvellum CAD/CAM, we committed 70% of our software development effort to stability and bug fixes. Delivering
Any way to get Project Wizard Prompt into the server SQL File?
I have a custom prompt that doesn't affect anything, its mainly used for reports "Exterior Finish Type". The drafter can select something or custom write a new finish. I need to find a way to tell IT how to get that information from the SQL file, Projects->LinkID,
How to move an adjustable shelf up
Got a cab that has a pullout hamper and a shelf on top. How can the one shelf be adjust up to make room for the hamper? Thank you in advance.
Next Page