The Face Frame Only Option Refinement
Would be great if we could have a face frame only option but have the ability to have the doors also built into the main prompts, i'm always using face frames only, but they are always with doors so i need to constantly add them. Unless there is a easierFeature Request: Angled Dimension direction fix
Someday, I hope we see those sweet 3d dimension tokens that so many of us voted for. I also hold out hope for a fix to the angled dimensions being drawn the wrong (flipped) direction. This is what we currently get with dims that have different X and YActive MV User
Is there a way to reference the logged in user on a report? where is this data? ex. including engineered by: [currently logged in user] on nest report EmpoloyeeLogin table would seem to be the logical place but no luckAdd More Star Hanger Hardware
We like to use the Star Hanger 320's for many things as well as others that aren't included in the libraries currently. We would like to see more Star Hanger products added.Multiple Glass Panels 1 Piece of Glass
Hey! I haven't had a whole lot of experience with multi-paneled 2pac doors in Microvellum so I'm not sure if I'm just missing a prompt or something. Currently using MV Profile Door with 6 face panels and it is giving me 6 separate pieces of Glass (imageNew Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseCopy and Paste in Edit Design Data - Please Fix this issue.
How many times have you pasted a formula into Edit Design Data and select Save, Close and Redraw? Guess what, it doesn't save it and now you have to do it all over. For some reason EDD doesn't recognize this change, so you have to "trick" MV into thinkingWiki
More of a general question: This detailing job has more info than I can keep in my head, Especially info used like once a year, Ended up making a folder for every supplier/company to contain their specific info, (150 suppliers), Then have a word documentCannot find Hatch Pattern
Hi All, Can anyone help me with the hatch pattern. I just updated BSB and this hatch pattern issue came up. I have never seen it before. Can anyone help me with ? Much appreciate your helpG-Code Footer
I would like to send my router to a specific coordinate (like X0.00 Y3100) after a board cut. Does anybody know where I can change the footer during processing of my workorder? I'm using the Microvellum Nesting Optimizer. Current footer: G00 Z28.200 G00Solid wood doors
It has been a while since I've had to change the doors to solid wood slab doors. Since there are so many ways to do it in MV, what is the best method? Change the door material pointer to solid wood material or change the door style to something? LookingHow do I make a part not draw in section?
So I've had this situation a few times on different islands and waterfalls, but I need to fix this for our Coat Shelf product. Currently itll draw in the end return piece (if its triggered to have one). I dont want it to draw ever on a section, but dontNesting Optimization Report with Edgebanding
It would be really beneficial for us to have edge banding on the optimization report. We don't use labels to identify our parts coming off our CNC. We write the cabinet number and draw a line on the edge that needs to be edged. Here's a screenshot ofFace 6 programs/Lables
im having a bit of an issue, seems to only happen on corner units (that i can tell) I print lables for parts with face 6 drilling, as usual... so the cnc operator knows what parts need it and which axis to flip the part.... our issue is, the lable pictureMicrovellumWorkOrder & MicrovellumGeometry
Installing a foundation library on SQL Server to run beside our component library until we can transition. Assuming i can just create the “MicrovellumWorkOrder” & “MicrovellumGeometry.” databases but name them differently for the new version. Leave theFeature Request - Double Pass and Tabs
It would be great if we could use "Double Pass All Parts" AND have "Tabs" in the same Nesting sheets. At the moment it's either one or the other, but not both.Repeating barcode
I have a "Gremlin" its been happening for a little while this Barcode Number "08VEAE01" Keeps Repeating.. I have tried to replicate it and it wont replicate where two different parts get the same name... but that same does appear in my test. I'm not sureTabs for cutouts
Hello Not sure if this problem (at least for me) was brought up before; Can Microvellum add tabs to routes and not only to border routes? My small cutoffs getting loose and messing up productionDelete a sheet in COMPOSITE but still comes up in REPORT??
Ok in Foundation (wasn't an issue in COMPONENT or their REPORTs) - You delete a SHEET but in the NESTING OP report it still EXISTs - But with NO data for items because the items are delete. And it ALSO has a blank dummy page in PART LABELS too. DeletedFEATURE REQUEST - Tool information needs to be visible on reports
We have the border tool displaying on our nest reports using the Material Code from the PlacedSheets table. We would like to display more information (like the description "3/8" RH Comp" as an example) about that tool if possible, but I can't figure outpull hole diameter issue
Right now, in the hardware tokens, the drill diameter for pulls is hard-coded to '5'. There is a global variable for that setting as well: "Handle Hole Diameter". This value is also set to '5', but of course there's no link there if the pulls' tokensAssociative Machining across multiple products
Hi All, For our toe kick lighting, we create a dado along the entire length of the run off cabinets and install a recessed light extrusion. For the MV strip lighting insert, it only creates a dado on the bottom outside (image below) I am looking for anWhy are my doors and parts not rotating correctly on composites?
When using grain i would like the rotation of my doors, sides, etc too be consistent. What is causing this not to be? Is it something MV is capable of doing, or am I asking for too much? Currently have to go through my nest and rotate by handIssues with Snaps
Does anyone else seem to be having issues with the snaps in BricsCad with just basic drafting? I feel like I am constantly adjusting points I snap too. Maybe I need to tweak a setting, but I was just wondering if anyone else was having the same issuReports needs openings for blind corners
As per the title the reports are missing the opening sizes for the blind corners, i have to measure and add them in manually as per the screenshot. Thanks Youll also notice the middle stile is reporting wrong width but that is less important.Overlay top and Rails both selected
I wanted to have top rails that are overlay but was told that isn't possible. However both are now selected and i don't know how to unselect them. I went to the spec group but can't select it there. Any thoughtsTwo different size screws used in construction is it possible?
We currently are using screws and dowels for construction. Conformat screws (7mm) used for construction of top/bottoms and ends. We want to use a smaller screw (3/16") to attach the back to the sides. Is there a way to specify two different sizes forBase_Door VS Base_MDF_Door
Can someone explain the difference between these two? Base_ door and Base_MDF_Door. Is the Base_MDF_Door, one that gets routed out to look like a 5 piece door?Composite file shows all parts under one product
Work Order shows correct product numbers. Reports show the product number. The composite file shows all parts are under Product 1.00.Need Hardware
Accuride 3634/3634EC Accuride 7950/7957 Rakks surface mount brackets Does anybody have these they would be willing to export to me?How do I export-oversize a part?
I would like our countertop backsplashes to be automatically oversized when exporting for production while maintaining the models and drawings at final dimensions. I presume this function is somewhere in the Part Properties or a Workbook but I cannotSwitching "Construction Methods"
Changing the “construction method” for one cabinet in a room to dowel construction, from invisible fasteners in “Prompts”, does not change all parts. Why do we need to go into “Advanced Construction Options” to completely make changes to all parts forFormula Help
Good Morning, I'm trying to set up an Alert or two regarding tall cabinets and rollout shelves. Is there an "includes" or "contains" command that we can use in Microvellum? I haven't found anything that works. I'm trying to formulate something similarFoundation Library Drawer Boxes - Material Selection
In the Foundation Library I am curious how others have it setup in their formula driven materials to be able to select between drawer box materials. As 95% of out projects utilize melamine drawer boxes, but occasionally we get a project that wants hardwoodLibrary Designer - Cannot copy subassembly?
I'm sure I'm missing something basic here so apologies if this is a very stupid question, but how do I copy a subassembly in library designer? At last week's Innergy conference I was convinced to finally give the foundation library a go. One thing thatHinge routing operation is also happening to the countertop dogbone routing
After successfully setting up the hinge cup routing operation, the operation is automatically happening in the countertop dogbone operation(s) as well. The dogbone is being routed correctly, but the hinge cup routing is happening in the same locationThe Report Group: Nesting, failed to process all reports.
I processed some cabs in a project that had two rooms. I got the error "The Report Group: Nesting, failed to process all reports. This is our main report we print out call a Nesting Optimization Report. Any suggestions? Everything I process for productionHardware List
If I wanted to print a hardware report of all of our hardware in the current library, is there a way to do that? Specifically talking about all of our hinges so we can just look at the report to see if the hardware numbers are correct?Why is ortho off when we open a dxf? Can you change it once and for all?
Please put ortho on by default so we don't have to always click on it before drawing linesQ: How are feature requests prioritised?
Just a question around how feature requests are actually prioritised now. Is it mostly based on likes and engagement, or is production impact weighed separately? I ask because writing a proper forum post takes a fair bit more time than submitting a ticketNext Page
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 26.1.0422.641
We are happy to announce that Microvellum build 26.1.0422.641 is now available! This build includes resolutions for issues with product dimensioning, associative machining, grid view within the processing center, sawing reports, and more. A new optimizationNew Microvellum Release Available Today: Build 26.1.0529.641
We are happy to announce that Microvellum build 26.1.0529.641 is now available! This build includes resolutions for issues with docking sizes, the formula editor, sawing G-code, and more. Please refer to the complete Release Notes for more informationNew Foundation Library Release Available Now: Build 26.0527
We are happy to announce that a new update for the Foundation Library, build 26.0527 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Now: Build 26.1.0520.641
We are happy to announce that Microvellum build 26.1.0520.641 is now available! This build includes resolutions for issues with room names, the find and replace feature within Workbook Designer, item number scaling, and more. A new option has been addedWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: