FEATURE REQUEST - Access Subassembly prompts interface from spreadsheet.
If I need to make the same 6 changes to multiple subassemblies, I find myself closing out of edit design data so I can access the subassembly prompts interface. When the changes are repetitive I think it can be faster using the interface.
How Do I Find the Widest Extents of a Spline/Polyline?
Hello - we are using a digital templating laser to apply the shape of the wall in which the plastic laminate countertop will be fitting. Our process is to template the wall, bring in the .dwg into Microvellum/AutoCAD. The curvature of the wall is brought
Architectural Millwork Drafter - Northern East Wisconsin
ARCHITECTURAL MILLWORK DRAFTER - Northeast Wisconsin (DePere, WI) Joseph A. Interiors is currently seeking candidates for a full-time draftsperson position. Successful candidates should be well-rounded in commercial casework and millwork and/or residential
Drawing cabinet at selected point is "floating" cabinet
As stated when I draw a new cabinet at a selected point (not attached to a wall or anything, just kind of in space) it is putting it there but it is floating in the Z axis. The plan view "dotted cabinet line" is showing at 0 on z axis. When I was doing
Wine Rack Trellis
I'm working on a Tall Cabinet with pigeon holes and I'm using the Wine Rack Trellis subassembly. My product is entirely 1" thick MDF. But when I change the Wine Rack material to 1" thick, 2 things happen. 1) I get a "Lap Joint" cutout instead of the
Part Optimization
Hi all, I'm having a problem trying to batch some cabinets. When I batch all my Components, I only get a few that are optimized and a large majority of them do not, even though show being "x"ed in the default row. Then when I run a "Parts Not Optimized
Finding all formulas within a product that use a variable
I want to modify a value of a hidden prompt in a product, but would like to be able to see everywhere the prompt is being used within that product. Is there a way to do this? I don't want to change something that I'm overlooking. Thanks.
How to quickly create 50 panels?
Hi, I hope that this is a very simple question to answer, but I have never used MV for something like this... I need to create 50 panels of varying sizes in MV so that I can optimize them to be cut on our beam saw. These will be cut out of 3/4" thk. MDF
FEATURE REQUEST - Record Archiving Selecting
So i've been trying to speed up our work order selection list and have been archiving all of our old jobs so we can access them at a later date if need be. The problem is, in the utilities -> database management section, when I do this, I have to select
New release available today: Build 21.1.0405.641
We are pleased to announce that the software update to build 21.1.0405.641 is now available! Here are some awesome changes to look forward to with this build... This build includes improvements to six areas related to 2D drawing features. You will also
Machining on fixed shelves subassembly
We use a "Blind Pin" detail on our Mail Slot Cabinet with 1/2" Thick Shelves. I'm using the Fixed Shelves EQ Subassembly in a Tall Open Product. I changed the shelf material to 1/2" thick and the Construction Holes to 5mm. But they are not centered on
When printing from Report Groups, add ability to choose the printer
When printing from Report Groups, I would like to see a "show printer option". I need my reports to use different printers and not always the default. The option is there when printing a single report.
Extruded Die Walls - Construction Method Open Discussion
I'd love to see an open platform discussion on different construction methods in regards to using the MV extruded Solid tools for Die walls, for desks, etc. This would serve as a source of information on this forum for others behind us, and hopefully
Subassembly Prompt Column - Wood Hack S1 E1
Hey! Check out the latest Wood Hack video! Learn how to take advantage of the Prompt Values column to manipulate project level subassemblies so they behave like unique subassemblies. Also, learn a neat hack for writing string values in these cells!
Remove Grain Parts from MV saw optimizer?
After running the MV saw optimizer for material with a grain, I am getting my total sheet count.This is great but I would like to take out the container parts from the report so they don't show up in my Saw Optimization Report. Is there a way to do this?
Multi Pass Tools for Drilling
Right, so I'm wondering why it isn't possible to be able to set up a multi-pass tool for drills the same way you can for routers. Obviously the uses aren't as numerous as they are for routers but I can think of a few. Am I missing something or asking
Stepped Flooring
So, I'm trying to get my head around the best way to deal with cabinets across steps or on stepped flooring. When I went to do this in MV, I ended up using Draw Part in 2D and drawing out how I needed the parts to end up (the kicker for example). It didn't
Correct procdedure for drawing walls in 2D elevation?
Can some one tell me what is the correct procedure for drawing the return walls here. Every time I go to draw the wall with returns for the elevation I get the RETURN walls laid over on their sides.
Compiled List of Variable and Object Names and Syntax
Looking if there is a compiled list of variable and object names out there? Or a better way of figuring them out quickly.... It's always hard for example to remember if its: Applied_End_Thickness_Left OR Applied_Left_End_Thickness Or if it's: L!Local_Var_Name
Show grain direction in Flatshot Token or in 3D Drawing
Hi, I was wondering if there is a way to have an arrow on our doors/drawers to show grain direction on the 3D Drawing of the cabinet or even in the Flatshot token? I've looked at the parameters for the flatshot token in the Metafile Instructions, but I did not see anything. Looking to get this into our products. Thanks in advance, Chris
Creating flat shots
Im confused as to how you get a product to create a flatshot of its self. I want to create something like the dynamic product image but i cant seem to get the product to take a flatshot and apply it next to the product. Any good walkthrough on how
Different Types of Edgebanding on Different Sides
So in our shop, our edgebander performs a pre-mill before applying edge tape, therefore a 400mmx400mm square panel will come off the CNC at its actual size (400mmx400mm). This is fine except for when we have an edge that needs to be finished by hand (scallops,
Flatshot Token for better default elevations?
While working on some simple custom products I got the the point where I have to do the elevations. I did it using bunch of DRAWRECTANGLE tokens and deleting the DRAW2DBOX tokens in the Drawing Tokens Tab. Wouldn't be easier using the FLATSHOT token?
Bridging the Skills Gap in the Wood Industry: What Are You Doing? - Open Discussion
How are you handling some of the obstacles presented in today's world when it comes to hiring or training skilled workers for your business? In a fast-paced, high-tech world, how are you meeting the challenges of finding qualified people who enjoy the
Better Fuzzy Logic In Material Search
It would be great if when I am searching for a material in the material browser if I could just type a few defining features and just a much more narrowed result list. As you can see in the image below, when i search for "white", I get all the material
The Microvellum Advocate Initiative - Coming April 2021!
Hey! Friends, Guess what?! We've been working on something new... A new initiative engineered to inspire, influence, and engage with the those that share a passion for technology and the woodworking industry. We just dropped our first trailer... Check
How does HeightAboveFloor works?
Trying to do a custom product from scratch and I got to the part where I want to have it at a certain height. I added the HeightAboveFloor prompt which got me above the floor but not quite there. See below. How does this prompt work and how can you adjust
Processing Station not opening
Hello there A bit new with this, it may be a easy question but i recently formatted a working station and reinstalled MV and ran into a few trouble setting things up. Solved most trouble searching this forum but this one cant find anything. When i create
can't draw wardrobe
There are few wardrobes blocks that I can't draw the wardrobe.
More than 8 Fixed or Adjustable Shelves in a Cabinet
Is there a way to have more than (8) shelf rows adjustable / fixed? We'd like to ... let's say "double" the allowed quantity of (8) shelves / (9) openings. One cheating way we found was to stack (2) subassemblies on top of another [=Opening_Z+(Opening_Height/2)]
Add the Formula Driven Aliases in the Export Material User Interface
Right now when you go to export a formula driven material, from within DB management tools, the aliases don't display and only the "evaluated" material descriptions do. This can make it hard to determine the exact formula driven material you want export.
Annotative scaling and item numbers
I've checked the box for annotative scaling on the Autocad tab in the options dialogue, and made sure the dim scale and text are also on annotative. They seem to be working, but the item numbers aren't scaling like the dims and text are. What do I need
Microvellum + National Association of Shopfitters Event
Join us for an upcoming event with the National Association of Shopfitters (NAS) as we discuss how a Microvellum Software solution can help your business reach its potential in 2021. This event will be presented by Daniel Mesecke , Microvellum’s UK
Qty of edges banded on report
I would like to add a "Quantity of edges banded" to a work order report. I can't seem to find a way to accomplish this. Any ideas are appreciated.
In Processing Center move "Reports" from "General" menu to the Main Menu
The most common task in the Processing Center I run after processing parts is printing reports. It would be nice if I didn't have to dig for the "Reports" menu. This should be included in the Main Menu bar. Preferably after "Scrap Options"
FEATURE REQUEST: Access Prompts/Properties/Edit Design Data from a Section
In builds in the past I remember being able to open the Product Prompts, Product Properties, and Edit Design Data from selecting a part drawn in a section. I miss this. This was always helpful for making corrections to products that were often found once
Problem with Shelf Locations in different Spec Groups
In one Spec Group the shelves work fine, but in a different spec group, they are not placed inside the cabinet. i see that there is a problem with the "Z" position but don't have any Idea how to fix it. If it works in one Spec Group but not in another
Circle in Corner of Part Border When Using "Draw Part in 2D" Tool
Hey all, Relatively new in microvellum and the industry more broadly here so I have a question that's probably really simple. When I use the draw part in 2d tool, there's a circle in the corner of the part border. My initial thought would be that this
The Pipeline (Trailer #2)
Hey! Friends, Check out the latest trailer previewing some of our upcoming video projects and our all new EXCHANGE events. Get ready for a stream of new video content coming your way...
Does anyone know the formula to Route a Circle-Pocketing?
Does anyone know the formula to Route a Circle-Pocketing?
Next Page