added drawer slides (KV8450FM, etc)
A good while back I added a bunch of KV drawer slides to the hardware look-up tables. I added KV8400's, KV8450FM's and KV8650FM's. These work great in products, but they exist only in the look-up tables, not in the hardware parts of the material files.Best Way to Draw a Plan View of ALL Walls and Products?
When you try to choose more than one wall to Draw 2D Walls Plan View you get the "Please select walls that are all connected." dialogue. Why is this limited like that? And can I get around it without making a separate drawing of each wall and then meticulouslyMachining on extruded entites
Hi, our team is new to MV. We have been trying to test the solid modeling tools. We noticed it is possible to add machining to vertical entities and those will apply to adjacent extruded entities. Our problem is that we need to add machining in betweenTrue Shape Nesting Optimizer (Beta) Now Available
With the 25.1.1013.641 update, you can now try out the new True Shape Nesting Optimizer Beta! If you already have the True Shape Nesting module enabled within your license, here’s how to turn it on: Go to your Processing Station settings and set the OptimizerFEATURE REQUEST: Updated Product Prompts UI
This may be wishful thinking, but I think an update to the Product Prompts, similar to the image below would be extremely helpful. I would also like to see the added functionality of being able to access the drawing while the prompts window is open. PrettyRIBS/DOG BONES SMA - OVERLAPPING MACHINE OP - SOLVED
Team I am having this issue with the SMA. It is generating a double line: one with multiple sections and another with fewer sections (as expected). Has anyone had this issue before?Please help
OEM Build 25.1.129.641 Foundation Library 25.0319 Is it possible I get this because it didn't install correctly? I had a ton of file names that were too long so I just skipped thru them during the install process. I can change layers just not in theContacting microvellum?
I wanted to talk to someone about buying microvellum for our shop. I used the contact form about a month ago, and i tried calling daily for a weeks time. I still havent heard a single word from them. Any ideas where i can actually reach someone?Extend Finished Toe Kicks for Miter
I would like to have all finished toe kicks extended by a set amount to make it easier to miter the corners. I've looked in the globals and don't see a way to do it unless I'm missing it. Is this something that would have to be added to the length formulaHorizontal Drilling Depth Issue
Newbie here The dowel holes in MV are set to 28mm depth When I open the MPR file in woodWOP, the holes come in at 20mm depth. The holes stay at 20mm no matter what I change on the MV side. The MPR file (notepad) shows a value of 28 for the depth [H VERSION="4.0Construction Method Missing
Quite common on divisions is the construction method not following through, as you can see it is set to dado & Screw, but is not dado'ing like expected. ThanksLost my ARCHITXT.SHX font and dfd-bold.shx
Hello, I've been using microvellum for only 2 weeks so I need your help lol. I work in Quebec so i have to use accents on some letters and i normally get them by using combinations of keys but it wasn't working even though my keyboard was set to frenchUnderstanding hardware items in reports
Foundation: 25.1024 Build: 25.1.129.641 I need some help understand the relationship between hardware items and how/when they are included in reports. Scenario: 1) We added a bunch of faucets to our custom sink subassembly. 2) The faucet types are filteredToolbox BSB - Final Conversion
Can someone please confirm what happens when I click "Final Conversion" for Toolbox BSB FLA Subscription? Does my Toolbox OEM FLA Subscription stop? Or will Toolbox OEM FLA Subscription continue as long as we keep our Toolbox BSB FLA Subscriptions? IHorizontal and Vertical Openings
Hi Everyone. Please Can anyone help me. Opening Insert Subassemblies whether Master Cabinet designers or Cabinets Starters from library 24.01 or even 25 don t have the Bay Options they Just have Component inserts options and those options are not enough.import 'component' based products into 'foundation' environment?
Is there any option to import custom products from a component based library (v050.7) into the foundation library system? I have a good many custom products, a few of which would not be easily replicated. Thanks! T.Web Page Feature Request
Is there any way possible when finished reviewing a forum post having the page take you back to where you were down the list instead of starting back at the very first post? Extremely annoying when you are a couple of pages into looking through the forumsPlugins For BSB
Where do we stand with plugins for Brics? They have one called communicator which allows for more 3d file types. I need an account with them to download it and dont have one that has a copy of the software attached to it, and when i try install the pluginArticle Save button?
Team, Can we get a SAVE button to save articles for later? Who says yes?Toolbox AC for AutoCAD 2026 ??
Any update on Toolbox AC officially supporting AutoCAD 2026?Removing notched corners in drawer bottoms
We recently switched to the Foundation Library from the Component Library. Or standard drawer construction is dowel with captured bottom. The sides had stop dados and the front and back had dados that ran past the ends. The bottoms would be cut with squareBSB Panels and Ribbons
Got an issue that is making me pull my hair out. Currently using the Drafting workspace. I got used to the ribbon along the top of the screen. When ever I would pull up an object properties it would open the properties panel and I would put it on thesetting up formula materials and having issues
ok I've been working on setting up a wizard with formula driven materials. everything seems to be working but seems strange that the material still shows in the OG formula output in the material Database name. the material name in the material info isBuild Request: Toolbox OEM 25.1.0616.641
Greetings Everyone! :) We were hoping to get our hands on the last build for Toolbox OEM since Bricscad BSB subscription has been launched. Since the autocad licence ended, MV is unable to provide this update as the deadline has passed.. Would someoneExploded cabinets??
Hello... Not sure what happen or what I am doing wrong. All of my cabinets in this big project I have going on have gone into exploded mode / selection. When I click on a cabinet it doesn't select the entire cabinet. If I want to see product prompts andHardware Machining Holes
Is there a way to update / change the holes that are created by this drawer spacer? The hardware part is Blum Tandem Slide Spacer. I don't see any parameters to change the holes in the design data. I can't make any changes to the holes in "draw part in1 Drawer Cabinet - Front marked as "Door" or "Panel", not "Drawer" (grain direction issue)
I have been reviewing my doors and drawer fronts. All 1 Drawer cabinets, the fronts are hardcoded as a Bottom Drawer Front. This is an issue for ordering 5-piece fronts since this looks more like a door front, and we would want the panel grain to runreports
hi, does anybody have a sample hardware report they would be willing to share? At square 1, just looking for something to import to get going that's more than the original from MV install. Thanks!Foundation Library - Dowel Spacing
Is there a setting in the foundation library like the legacy (component) library to switch from small dowel spacing to large dowel spacing. As currently in our legacy library we use 96mm dowel spacing on our base cabinets and 64mm spacing on our upper5 Piece door is showing gaps between rails and stiles
There is a gap between rails and stiles on a 5 piece door The tongue length measures at 0.5" (needs to be 0.375") . Which is causing the overall rail length to be 0.25" short In the "S" workbook, the tongue length is set to 0.375". If I change it to 0.5"Choice: Toolbox AC or Toolbox BSB
Hi Community, It's been 3 months since BSB launched, and I have put a lot of detailed feedback and done massive search regarding whether we can transition our team's heavy muscle drafting memory from AutoCAD to BricsCAD, and we are still struggling, asWork Orders Summary with Face Frame cabinets
I just used the face frame category for the first time . Everything seemed fine until I processed the cabinets and looked at the work order summary. The width shows the inside dimension of the cabinet not the overall width. when the PM and I were lookingAbility For .mprx CNC Output
Adding ability to produce .mprx files in G-code to keep up with newer WoodWOP versions. Gives operators better variable support and data manipulation in components vs the .mpr output.Cross Section Wall
I would like to turn of the Cross Section Wall. However, turning off the 2D_Section Layer, will hide all Geometry. What "Prompt" controls the Layer for the Section Wall.Hinge Bore Visible Through Faces in Conceptual
Why is this happening? We have a client that wants a more Cabinet Vision/Mozaik look, but the hinge bores are visible through the faces. Even if I turn off the hardware layer, the hinge bores are still visible in the Conceptual Visual Style. This is withVauth Sagel Bins
Hi @Lenny Scianna, Do you know if the Vauth sagel range of bins (VS ENVI SPACE) are planned for library development in the near future? I was going to create our own but thought it would be worth checking Thanks!Parts Excluded from Optimization
Using multiple sheet sizes of a certain material we sometimes get an error 'there is not enough material' for a given material when processing. We can usually resolve the error by adjusting sheet quantities and optimization priorities using the ModifyNew Microvellum on BricsCAD User - Challenges with AutoCAD-centric Training
Hello everyone, I'm a new user working with Microvellum on BricsCAD, and I'm finding the official training videos, particularly those in the "Plan to Production" playlist, challenging to follow. The videos are great, but they're demonstrated in an AutoCADDowel Machining on Stretchers/Rails - Machining from Back Edge instead of Front?
I our old Legacy Library the rear stretcher machines from the back edge instead of the front edge, and in the Foundation Library it currently machines from the front edge. Is there a way to change this in the Foundation Library so the rear stretcher machinesDrill bit "Type Info"
Right now our CNC's have 5mm brad tip bits installed. In my other CNC's at other companies we opted for V-tip bits so we could drill for pulls without blowing out the front faces of the doors. I don't recall this 'Type Info' setting in those tool filesNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 25.2.0406.641
We are happy to announce that Microvellum build 25.2.0406.641 is now available! This build includes resolutions for issues with the Product Prompts UI, the Part Properties interface, formula driven materials, and more. Please refer to the complete ReleaseNew Microvellum Foundation Library Release Available Today: Build 26.0327
We are happy to announce that a new update for the Foundation Library, Build 26.0327 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Today: Build 25.2.0330.641
We are happy to announce that Microvellum build 25.2.0330.641 is now available! This build includes resolutions for issues with editing formulas in Part Properties, perfect graining, toolfiles, errors occurring during processing, and various issues withinNew Microvellum Release Available Today: Build 25.2.0317.641
We are happy to announce that Microvellum build 25.2.0317.641 is now available! This build includes resolutions for numerous issues with Microvellum's optimizer, block nesting, the nesting tools, label creation, part machining, and more. The Product PromptsDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earn
Follow us on: