Drawer Face Position Name
It was brought to my attention from production that the drawer front faces no longer say Left / Right for there position on the cabinet for a 2 door-2 drawer or any side by side drawer. Why was the name removed in Foundation? The Component Library hadFeature Request: DRAG and DROP
Is the "Development Team" considering implementing Drag and Drop of products, for use in BSB OEM?SMT's on Restart/Redraw
🤔Now this is interesting I went to redraw a simple L shape construction path. I used the normal process to restore and it wont redraw???FEATURE REQUEST: Elevation and Section Redraw Options
Currently, for redrawing products we have options for: 2D Plan Drawings, 2D Plan and Elevation Drawings, 3D Drawings (Minimal Machining), 3D Drawings (Minimal Machining and Shelf Holes), 3D Drawings (Full Machining). When redrawing the products it willNetwork Performance Issues
After posting a question in the focus group webinar that just occurred, I got to thinking about the response from the Microvellum team. My original question was asking whether Microvellum had any plans for local caching of data to help speed up certainFeature Request: Improve Visibility in Insert Function (FX) UI – Adjustable Column Widths
Overview: Updates last year to the Insert Function (FX) UI have improved readability of formula results, which now display without being cut off—a much-appreciated enhancement. However, these changes have introduced a tradeoff: reduced visibility forFeature Request: Native Support for Distinct Hardware Material Types that the Workbooks can read.
Summary: Enhance the hardware material system by introducing native support for different hardware types (e.g., hinges, handles, locks, drawer runners) that the workbooks can identify and interact with distinctly. Current Limitation: All hardware materialsThrough cuts
We are trying to get through cuts and can't figure it out. We were using brad point but the edges on the bottom side are not good enough so we got the through point bit from Frost but when we try to set it to -z.20" it doesn't cut all the way through.How to Delete Specific Blum Antaro Drawer Heights
Hi Gang! I would like to delete Drawer height K and D-Double Rail from Antaro Drawer Height options. As you can no longer buy them in AU. I've looked through all the spreadsheets and design data and can't find what I'm looking for/too scared to changeFeature Request: Bumping to outside of Applied End
Would be nice when we used the Bump Cabinet command it would bump to the outside of an Applied EndSMT
I would like to know if anyone has created a way to allow a plate to be extended. Working for a shop that wants to incorporate (tongue and grove) to one floor plate in field joint? I have to, at this time, use the tools to extrude and lock the tonguSection drawings for the Zbox and Zargen
Would be nice to have section views added for both pieces of hardware in section. Currently doesn't show up and looks odd with no hardware.Small Scale Prototyping
I've been thinking about getting a desktop laser cutter to make small scale prototypes of things like reception desks and other custom products. Has anyone tried this? What machine(s) have you used? Any success stories, major hurdles or suggestions welcome.Edit Formula box in Workbook Designer
Would love to see the edit formula box available in Workbook Designer.Edit toolbars in bsb
I have a tool bar set on my drawing palate in bsb foundation it has 35 tools on the tool bar. I require 8 and have no need for the rest. Can the tool bars be edited so it is smaller and only has the tools I would require. Cheers ScottRoot Element is Missing
Hi everyone. I hope you can help with this problem that I encounter just now. I was just doing a project when an error suddenly pops-up. The Toolbox closes and now this error is showing up when I'm trying to re-open the program. Here's the error scrWoodWOP/Cutrite Multiple Pocket Configurations
We have a Homag nested bed that I use WoodWOP pockets made by CutRite and would like to stick to doing that (We run phenolic and the DXF MV spits out has flat machining, so my tool is just going full depth into phenolic) My issue is my other nested bedNew Toolbox Release Available Today: Build 25.1.0826.641
We are happy to announce that Toolbox build 25.1.0826.641 is now available! This build includes resolutions for issues with perfect graining and part placement, as well as various issues surrounding database usage, such as data association, copied productNew Foundation Library Release Available Today: Build 25.0813
We are happy to announce that a new update for the Foundation Library, build 25.0813, is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,Long Material name runs into yeild on nest
Is there any way to rearrange the text below the nest in the composite dwg. My material name sometimes gets too descriptive and runs into the yield %. Do not really need the yield displayed.lables error
all of a sudden this error popsup when i go to print labels. i think it started when i modified the label in brics cad but this error only comes up on toolbox autocadFeature Request: Product Image Scale Size
Feature Request: The help image for products should scale to fit the opening.Turning Valance from being processed but still draw/show
We typically just run our valance parts as 8' runs and our installers will cut as needed. I want the valances to still show and draw in our 2d sections but i dont want the part to process on the CNC. I know theres a few work arounds to accomplish whatHanging Rail DWG file
Hello MV world! I need to substitute the default Hanging Rail drawing with the actual one we use in our company. Ideally I just want to swap the current 3D drawing to the one we use, keeping the origin the same so the formulas stay intact and the product/drawingSOLUTION REQUEST: Have SMT Create a Layer Specific For Construction Paths
I thought there was a post about "rebuilding products from an existing session" on here, but I can't find it. Or perhaps, the question came up during the IWF Connect - SMT session. Either way, the question was in regards to construction paths; somethingAngled Cabinet Design
I need to make a angled cabinet like the below picture. That was created very quickly with the Any Angle Cabinet, but not correctly, but i also need the door hinged on the angled side, 45deg hinge. I need to be able to make the angled side in a different2D PLAN VIEWS - How do you create them?
We are working on setting up the foundation library and moving away from the Legacy (Component Library) and are updating some things along the way. One thing we are curious about is how people do there 2D plan views for Casework? As we currently utilizeReport Opening
Is it a bug or desired change now that i can only one report at a time?! I used to be able to open multiple reports at a time so i could go through and print them all in one hit but now on the latest update i have to open one, print it, close it, openPrompt Pop Ups
Part of developing our own custom products, I wish there was a way to have a popups in prompts. It's own built in wizard in a product. Sort of like how you have it for Subassemblies, or the calculator. The radio buttons are okay, but if I can just haveProcess New Cabinets in Existing Work Order
Is there a way to process a new batch of cabinets in an existing Work Order? Right now, every time I run a new batch of cabinets, I have to create a new Work Order. We process cabinets for each room and every project has several rooms. This makes the Work Order folder grow very fast with so many folders. If I could add new batches of cabinets to an existing Work Order, I could keep all the batches from a project together in a single Work Order. This would reduce the amount of folders in the WorkFEATURE REQUEST - Make Custom Hatch Field Work With Formula-Driven Materials
Right now it seems that the "Custom" hatch field for materials isn't exposed to the Formula-Driven Materials system. It'd be nice if it was, can't really use it for FD Mats without that unless you're willing for them to be inaccurate half the time. It'dAdding Corner Radius to Standard MV Door
Hi everyone, Does anyone know how to add a corner radius option to the standard M door in Microvellum? I can’t find a setting for it. Any tips would be appreciated!Product Engineering Team Meetup Won't Let Me Register
God only knows why this has to go through MS Teams. I consider MS one of the least competent online companys. Yes, I have a Microsoft Live login but it has NEVER worked properly to login to any clients Teams meetings. My MS Live login script saved onBSB Highlight
I am finding products remain highlighted after moving (MV move). Setting highlight to 0 does not seem to make a difference. The only way a can remove it is selecting the product a second time (without any mv function) and hitting escape. Is this a bug?Toolbox BSB Office Hours on peAk
This post will catalog the recordings of Microvellum and INNERGY's Toolbox BSB Office Hours. These 1-hour events are Question and Answer sessions held on a bi-weekly basis, with Microvellum and INNERGY staff answering your questions regarding ToolboxToolbox BSB Office Hours - New Event Schedule Starts Next Week
As promised, we’re finalizing the recurring schedule for our Toolbox BSB-focused Office Hours and look forward to kicking things off next week. Here's what we had in mind: Date: Every other Thursday at 1:30 PM Pacific Time Event Duration: 1 hour Who'sÀ la carte updates
I find myself wanting some features from Foundation Library updates... but I don't want them all. Could we have the option for à la carte updates? Pick and choose which part of a Library update you want to apply. For example, that new drawer slide, justHow to Remove Part Label on 2D Elevations
How do you get rid of the part label on 2D Elevations in the Foundation Library? We don't use this note at all and want to remove it before making the Foundation Library accessible company wide for everyone to use.Perfect Graining
Anyone else have problems using the perfect graining. Seems to be everything but perfect. No matter how many times I setup the perfect grain container it always defaults back to #1. Once in a while I can get it to work. Be great if MV could figure itWhat is actually included in the Design only Microvellum
I was thinking of getting Microvellum design only for the CAD and Microvellum. What is it actually. Does it have all of the feature and libraries of Microvellum, the only difference being you cannot create Work Orders? Or is it stripped down version toNext Page
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 26.1.0422.641
We are happy to announce that Microvellum build 26.1.0422.641 is now available! This build includes resolutions for issues with product dimensioning, associative machining, grid view within the processing center, sawing reports, and more. A new optimizationNew Microvellum Release Available Today: Build 26.1.0529.641
We are happy to announce that Microvellum build 26.1.0529.641 is now available! This build includes resolutions for issues with docking sizes, the formula editor, sawing G-code, and more. Please refer to the complete Release Notes for more informationNew Foundation Library Release Available Now: Build 26.0527
We are happy to announce that a new update for the Foundation Library, build 26.0527 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Now: Build 26.1.0520.641
We are happy to announce that Microvellum build 26.1.0520.641 is now available! This build includes resolutions for issues with room names, the find and replace feature within Workbook Designer, item number scaling, and more. A new option has been addedWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: