Feature Request - Add XLOOKUP function
The XLOOKUP function would be useful when searching table data.Adjustable Shelf doesnt correct for drawer
Recently the adjustable shelf was made to adjust for face frame opening or carcass opening, works perfectly for every unit that isn't a door/drawer cabinet. When a draw is above the cupboard with shelf, it will not adjust correctly and isn't divided correctly.Warning messages not showing through project properties
Hi. Just finished setting up our new cut part and edgeband wizards and I have added a few warning messages for the end user. Works great if you open the wizards through the advanced project setup, but I get no warnings if gaining access to the wizardsPart CNC nest spacing for various tool diameter?
I see there is a default gap spacing on parts nested on a sheet . Can that be set up to accommodate different tool diameters? Or is this pretty much a one and done option ? We are currently at a .5 part nest spacing in between parts , if changing toReport Drawing Flatshot does not show profiles
I am wanting to send my flatshot drawings from the MV reports to our customers to confirm their order. I am embarrassed to send the current flatshot drawings. I manually add a screenshot of the cabinet from the autocad view, but this takes a long timeMaterialProperty Function Issue
Yesterday, I realized the part grain override formula (to force length/width grain direction) in our library wasn't working. The formula is giving a #NAME error for every part. I'm not sure if this was customized from the standard library at some point,Adjusting Shelve QTY in a designer cabinet with drawers and components above
Hello All. I'm trying to adjust the quantity of shelves in a designer cabinet with an interior selection of drawers with components above. However in the sub-assembly I don't see an option to select the quantity of adj. shelves and even when I go to modifyPhase Status Indicator
Back in the day, V6 I remember that you could modify the phase or item to indicate that it had been released. It would be handy at times to have this feature returned. Maybe this is still there and I just haven't found it.Can the default color selections in “Smart Layer Manager” be setup by default to start by using the built in AutoCAD “Index Colors” instead of the “True Color” RGB colors?
When using the default AutoCAD “Index Colors” when you go to print in MonoChrome the layers and output are easily translated in the Black/white. But from our use when using the “True Color” RGB colors the colors don’t change or translate unless you createHow to get lookuptable value using row and column
Hi. Could someone please help me with trying to get the value from a look up table which is basically combining the VLOOKUP and the HLOOKUP, if that makes sense. So, I have a table for board materials where the rows are the board name and the columnsTokens
Hi For the "add" to add a token where are the settings for this as per the 2 screen shots attached? As I want to make a few small changes so each time its used to comes out to what we use instead of making changes each time. I know they can be saved toUsing MV to Provide Cut Files for Outsource
Due to an overloaded pipeline, my company is reaching out to another company to outsource casework production. We use MV and have a Weeke CNC and the other company uses another program with a Morbidelli X200. I imagine the other CNC uses a different fileToe kick line being drawn on 2D Elevations when the TK is not integral
I am having a problem finding the solution to this and I am hoping it's an easy fix that I am overlooking. My company doesn't use integral toe kicks and chooses to use ladder style base instead. When I draw a 2D elevation, It draws everything it is supposedUpdating to The FLA Builds
Hello everyone! Now that some of the dust seems to have settled regarding the FLA change, and there seems to be a large pool of users who have updated to a build that forces the FLA, I wanted to see what y'all thought the pros/cons were of floating licenses.Parametric Default Tool Depth?
Trying to set up a Multi-Pass tool, and would like to have the depth of an operation be parametric. Since we'd use this tool on parts that are +/- thickness and want to always have it cut 2mm shy of all the way through. How can we make consistently shyDivision Bug
Hi in the screen shot you will see a countertop unit that has had its bottom base board turn off as well frame rail etc. The ends of the unit appear to be working perfectly, but the divisions are up in the air and its visually notching the frame stilenested parts have different radius from 2d single parts
don't know if this has ever happened to anyone else. just got done processing a work order with parts that are radiused. the inside radius was designed to be 24.7500" after processing the inside radius is coming up as 24.761" on the nest with the trueRequest: Drill holes in tops and bottoms
Feature request, drill holes in top and bottom boards where the nailers meet, we screw into the sides and tops which helps keep units square and true but i cant see any option for it, i could add it manually but with every update i have a growing listHow to know the correct placement for machining when using 2D Part Editor
We had a question come up in our product review meeting about the best way to determine where to place a machining operation when using 2D part editor. It can be confusing to know how a part is orientated when seeing it in 2D compared to how it looksMaterial updates to product-level spec groups are changing the library spec groups
My team is currently using the Imperial Component Cabinet Library (v047.1). We have a number of times changed the Library spec groups to be our default naming conventions for materials. When we start a new project, we make copy that default spec groupWarning pop-up creation?
Hi everyone! I would like to know if there is any way for me to create/place a warning pop-up on a column in a product design data. Like in Excel when you can define a rule to highlight any data that is not in the right range. For example: For my machineFoundation- "Ladder Style" Toe Kick Assembly
I am trying to write a formula for a DIM referencing "Toe Kick Space". Have tried adding a few different Prompts with no luck. Any insight will be appreciated.MV Assistance
Hey MV Community, I've been out of the MV game for a while and need some assistance. I'm looking for the best way to make a custom product for this outdoor trellis. Can anyone recommend a product to start with and formula for the 1x3 Slats where the sizerouter time
does MV have a utility that calculates router run time for a work order?SMA and Profiles
It would help to understand why SMA does not create the profiles for a Solid Surface edge and cove detail, that I drew. First pic shows SMT making what I want and pic 2 shows what SMA creates.New Toolbox Release Available Today: Build 24.1.0703.641
We are happy to announce that Toolbox build 24.1.0703.641 is now available! This build includes resolutions for issues with nesting tooling order, custom strings in horizontal boring, edgebanding data populating exported orders, and more. Please referHiring Microvellum Designer in Denver
R & R Millwork is a well-established repetitive chain store fixture manufacturer in the Denver metro area. We are looking to hire an experienced Microvellum designer to work in our office to support our team. We take pride in providing a positive andDuplication error
I Keep getting a weird duplication happening with my units, its hard to pin point when, but in this scenario, it is a 80% custom unit. It happened when i had closed part editor, used the prompts page to then adjust the height of the unit to make sureglobal variables in library updates
I had the impression that with the foundation library updates, new global variables would be appended to existing global files. even ones that had been renamed. this idea came from this article toward the bottom: "No spec group (global or wizard) workbookLicensing Portal - Where to access?
Hello, Just wondering if anyone knows where to access the Licensing Portal? I'm getting this error message because all available Microvellum seats are in use. It says I can check a licensing portal to see who's currently using the seats, but I can't findlock position
Justed added a lock by copying existing similar lock and modifying parameters. In the image below where do i changed the 7/8" distance. Currently the lock is 3/4" from the edges and needs to be 7/8". Thanks in advanceLead Microvellum/AutoCAD Draftsman
E.B. Endres, Inc. is a custom casework/millwork fabrication company that produces the finest custom cabinetry, architectural millwork, and solid surface products. We are looking for a draftsman to fill a key-role in our manufacturing process to supportJobman Integration
Hi, just wondering what file type the Jobman ERP system actually requires, none of the help guides ive seen specify and everything ive exported from MV has failed to work with Jobman. ThanksAvoid printing empty reports
Is there a way to avoid printing empty reports? Thank you.viewbase
hey guys i use view base for all my drawings these days but i am wondering is their a way to show door swings and drawers on plan view on my setup it doesnt come through.Shelf Hole Spacing
I have a 2-bay cabinet. Both bays have adj shelves. Anyone know how to get different shelf hole spacing per bay. I can change the spacing but not per bay.Item Number Variable?
Is there an Item Number variable that I can reference in a formula? I'm trying to pull in the item number to a dimension string using the 2D drawing tokens and can't find that value anywhere in the workbook. Essentially I want the cabinet number inlineMirroring
Hello MV team Is it possible to have a proper Mirroring function??? Ie the ability to mirror a product including all cut outs and extra machinery, we do lots of repetitive work that changes from right to left hands, it would be nice not to have to manuallyTabs
Can someone please point me in the direction to find "tabs" for small parts on Microvellum? On Vcarve (we use for super specialty stuff), it's a prompt in the tool path section but we cannot seem to find in on MV. TIA and Happy Birthday America!!F Workbook & Database Explorer
Is it possible to export/drag drop the F Work Book? We have a sandbox that gets updated and a main configuration the Drafters/Layout Techs use. I've been manually updating the F Workbook Changes. I was wondering if there is a way to Drag Drop it fromNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofDesign & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnNew Microvellum Release Available Today: Build 25.2.0114.641
We are happy to announce that Toolbox build 25.2.0114.641 is now available! This build includes resolutions for issues with the Processing Center, saw trim values, label output file paths, and more. Additionally, in accordance with Microvellum's new subscriptionWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: