Example of optimization
I have attached an example of the need for the ability to nest parts within parts. Large window area 61.5x25.5 that is cut out. There are a lot of parts on this project that would fit and to make matters worse there are a lot of these on this project.Drawing Countertops
Hello all, I am looking for a tutorial about how to draw countertops. I assumed there would be one on this knowledge base, but after searching "tutorial countertops" and coming up with nothing, I thought I'd ask. I have attempted to draw some (withoutAdding Item Numbers to 2D Drawings
G,day All. I have added draw block 2D Item Symbol to my cross section 2D instructions promps in Edit Design Data. I am unable to get them to reflect the original number of the sourse product. Any help much appreciated. Cheers. PS. I am using MicrovellumScrap Parts should not increase yield.
I have noted a few times where the program decided to use a 5x12 instead of a 4x8 when all the parts on the 5x12 would have fit on a single 4x8. This is caused by the fact that scrap parts are considered as if they increase the yield of the sheet. Therefore,SML and Layers Properties
Where do I find in the "Knowledge Base" info explaining the string?Engineer/Drafter Needed
Madera Millwork is a Family owned Commercial Millwork Shop located in San Antonio, Texas. We are currently looking to fill a position of need immediately due to an existing Employee Retiring. Madera offers full-time employment, Medical Benefits, Bonuses,EPB PLATE JOINTS
Where in SM Tools do I find how to set the Top & Floor plates to have the same locations for seams?New Release Available Today: Build 21.2.0111.641
We are happy to announce that the update to build 21.2.0111.641 is now available! This build includes resolutions to issues with Scrap Management, Saw, Part Processing, Project Wizard, Include Routes In Borders (IRIB), and Material Processing. ReadGraphics card and Drawing Solids
I am using EPB for Die Wall construction along with drawing AutoCAD Solids in MV. I don't have the latency if I am using AutoCAD to draw my solids, it is when I am using MV that I experience the latency. Trying to understand if the latency is a combinedAny links or video on converting 3d scans to a Misc Part?
The scans follow the wall detail so its not a perfect arc. My problem seems to be that when I go to create a boundary from my scanned points to create my part shape , cad does not like all the vertices and starts to do different weird things. I am assumingMicrovellum Engineering & Submittal Services
Dear Sir/Madam, With over 25 years of experience, we offer remote engineering & submittal services for an hourly rate. We have over 5 years of experience on Microvellum engineering, 10 years on CNC programming such as Nested Based and Point to PointMicrovellum Engineering & Submittal Services
Dear Sir/Madam, With over 25 years of experience, we offer remote engineering & submittal services for an hourly rate. We have over 5 years of experience on Microvellum engineering, 10 years on CNC programming such as Nested Based and Point to PointPocket Route Lead In / Tool Compensation Issue
Hello, I recently made a created a 900 multi pass tool using my default router (1/2" DIA). My intention is to cut 1 3/16" material in 2 passes. I made a 1 3/16" Top and used the multi-pass tool to cut pockets/squares into it for trash bins that wouldMV Bookshelf - February 2022: "The 7 Habits of Highly Effective People" by Stephen R. Covey
Happy Ground Hog Day! With February now underway it's time to get another discussion started on our book for the month: "The 7 Habits of Highly Effective People" by Stephen R. Covey. I'm really looking forward to this reading this book. I have never readExpress tools meniu
Hello, Sometimes when I make drawings I need commands from the menu Express Tools. I saw on YouTube that the "acetmain" file needs to be uploaded. Can anyone tell me if they have done this without any issues with how the Microvellum program works? TCopy in Product List
Hi I though it was a bug and was later fixed in recent build, but we used to be able to copy cabinets from room to rooms in the Product List tab and they would keep the same items numbers. But after a update, now the items numbers keep incrementing.Reversing the direction of the tool direction on 2n passage.
Hi, actually we are getting the lip on the board while CNC machine does its second passage on the board. One of the technician told us that if we reverse the direction of second passage it will go away. So my question is by any chance someone can pleaseHow do you "revert" subassembly changes from Library Designer to past projects in Foundation Library?
We are using foundation library, and maybe some have noticed, dovetail drawers are not in there. I have added a global and changed the cut sizes in library designer to reflect what we need to construct dovetail drawer boxes. I did this very recently andSolid Model Analyzer not picking up on 3mm material
I'm having issues with getting a simple countertop working, wondering why the 3mm is not getting recognized here.Adjustable Shelf Conflict
When I run a tall cabinet with adjustable shelves, and one of the shelves is near a cabinet door hinge, we get a weird route near the corner of the shelf. Is there a way to avoid this? It is the depth of the hinge cup route.Weeke Barcode Mirrored Field Placement
Does anyone use barcodes to place mirrored parts on a Weeke BHX 055? Stiles machinery tells me MV needs to add a 1 for normal field and 2 for a mirrored field to the end of the barcode.Divide an Arc
I'm looking for some tips on how to divide an arc. I am using the "DIVIDE" command, but it doesn't seem like it is doing anything. I also read that after the "DIVIDE" command, you should use the "DDPTYPE" command to get the division points to show. WhenTrash Pull Out
I'm sure others have done the same. But, I made a simple trash pull out for customers due to the supply shortage on the KV ones that we normally order. Curious to hear what others do and what other members cnc in house versus outsourcing.Error: Index was outside the bounds of the array
Every once and while we get an item that constantly errors upon edits and redraws "Index was outside the bounds of the array" Rebuild the walls, rebuild the product, make adjusts and it recreates the item but continues to error. Any ideas of what to checkAdd Read Only on MV Files, CUTX, CTPX, EDGX, HWRX etc
I am not talking about DWG read only, we already have that from AutoCAD. I am talking about having read only built into MV for it's files to prevent two users from being able to open a product, a subassembly, a spec group file at the same time and make2D Section Dimensions
When I draw a 2D cross-section of a product, the dimensions for the doors and drawer fronts are anchored to the face of the cabinet rather than the face of the door or drawer front. Is there a way to change this?Added Zero layers while working in EPB
Can someone explain how/why these layers are automatically being created, while I an working in EPB?SMA Not working Correctly
We are experiencing a issue when using SMA See attached. It seems to be kicking the part out slightly skewed? The Previous version worked fine for this? Its showng in the Part properties as well.FEATURE REQUEST: Pocket Mortice Token
The Pocket Mortice Token is great but I would like it taken to the next level. I need this token to have the ability to adjust the route depth and be able to adjust the edge bore Z height. This will make it so this token can be used for 1/2" materiPocket Mortise Token
Has anyone used the pocket mortise token in MV? It shows it as an associative token. I started playing around with it and can't get it to work. Anyone have any success using this token? The reason why I'm asking about this token is because productionMicrovellum Saw Optimizer Reaching Maximum Iterations
We use Microvellum Saw Optimizer, and I ran into this message while processing my parts in the processing center. "Microvellum Nest Optimizer Reached Maximum Iterations Without Results" I ran into this issue in the processing center with a job of aroundChanging Shaker Doors via Sub Prompt.... Sloooooow
Is anyone else experiencing extremely slow population when making changes to a nested sub assembly? To change a shaker door to say Face Panel Qty from 2 to 1 takes up to 2minutes every time. I've done it via the spreadsheet but when I refresh the productHelp!!!!
Unfortunately, I am not the MV wiz. I just spent almost 3 days working on a project with 13 rooms all to get ready to plot the drawings and MV went into "thinking" mode and never plotted them. I am notorious for saving every 5 minutes or so when working.Drawing Tokens - does it have to [END]?
According to the Drawing Tokens section of the Knowledge Base you need to add [END] at the end of the list. Is there a reason for this? None of our products have this. Is something going on during the processing of drawing the Elevation/Section/Etc.In house Microvellum Engineer needed 21 Feb 2022 05:28 PM
Commercial cabinetry and millwork Microvellum Engineer CLM is currently adding to existing staff due to exceptional and sustainable growth. We are looking for qualified and motivated project engineers, s who are willing to work in a fast-paced, detailed-orientedDrawer front adjuster machining type
Is there a global variable to change how the holes for the drawer front adjuster are machined, i.e. routed instead of drilled? I called myself looking several times, but haven't found one. I'm having to go into the nest drawings and change them to routesWish List
My I would like to see Microvellum add this list: First on my list is optimization,l MV does a pretty good job, especially with square or rectangular parts, but when you start to get odd shaped parts things can go wonky. What really exasperates me isSink cutout
Hi there, How can I cut out the sink on 'Countertop With Substrate' which is the model from the library? Actually, I edited it with the custom sink and set up the sink cutout from 'Prompts for Sink'. However, it does not work. So, when I use ‘viewbase’Limitation of Custom Cabinet in Foundation Library
Hi, I have been peering at different versions of Foundation Library and am very looking forward to making the move. But it seems it has limitations for some cabinet configurations. I tried a few ways to make the attached cabinet and have no luck yet.Joinery
Can anyone tell me how this would be joined? I have been a cabinerd for so long and have seen this in a couple instances and just can't figure it out. It seems to be edge banded material cut at 45 degrees but how is it solidly put together? No there areNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Register Today!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
Design & Engineering Skills Competition
In honor of Microvellum's 30th anniversary, we’re shining a spotlight on the talented designers, drafters, and engineers who use our software to bring extraordinary ideas to life. Showcase your creativity and expertise by entering for a chance to earnNew Microvellum Release Available Today: Build 25.2.0206.641
We are happy to announce that Microvellum build 25.2.0206.641 is now available! This build includes resolutions for a pair of issues surrounding the Subassemblies workbook and item numbers within composite drawings. Please refer to the complete ReleaseNew Microvellum Release Available Today: Build 25.2.0204.641
We are happy to announce that Microvellum build 25.2.0204.641 is now available! This build includes resolutions for issues with subassembly variables, various minor issues with the login UI, drill operation hole placement, and more. With the release ofNew Microvellum Release Available Today: Build 25.2.0114.641
We are happy to announce that Toolbox build 25.2.0114.641 is now available! This build includes resolutions for issues with the Processing Center, saw trim values, label output file paths, and more. Additionally, in accordance with Microvellum's new subscriptionWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: