Blind Corner Overlay Hinges
Can we get these blind corner overlay hinges added to the blind corner product
Missing Material files
Yesterday I added some new sheet stock material to my template and today when I opened the spec group the folder was blank. Thinking I did something wrong, I tried to reenter the sheets, but got an error message the name was already used. So any ideas
overlapping parts on composite, perfect grain container,wrong grain direction
Select cabs within a grain container with Horizontal grain. Ive never had this happen before. build 26.1.422.641, terrible yeild, Grain going the wrong way, and parts are overlapping on the nest, anyone familiar with this masdness? ticket created 24hrs
Invisible Fasteners
I changed my assembly from dado to "Invisible Fasteners" for the master 2 bay vertical and the division has the machining running X. Should it be in the Y
Is there a way to set up parametric Multi-Pass tooling
I'm currently setting up multipass tooling for a new set of compact laminate/solid surface cutters (1 roughing, 1 finishing). The problem is we have 6 separate thicknesses of these materials in our library plus more we haven't used yet and i would rather
Angled sides
Hello community! We cannot figure out how to get the left side of this piece angled. The front piece no problem but we also need to get that side piece to angle so we get a "miter" in the corner. I thank you in advance for any suggestions?
Foundation Library embedded nulls in password
--Had some free time today, so I downloaded the Foundation 26_0430_Metric library Although I have other Foundation configurations that work fine, I'm having a problem with this one: Has anyone else had a similar problem? I'm not seeing anything blindingly
Blum thin door hinge
hey all does anyone know if the library has a blum thin door hinge i cannot find it anywhere
Lift Up Doors with Hinge + Lid Stay
Is there a way in the foundation library to switch the lift up doors to utilize a standard concealed hinge + a lid stay like this instead of a system like Aventos? I'm struggling to find a way to ge tthis type of combination of hardwarae with the out
Feature Request: MV Ribbon Panel
Has anyone already built one in the AutoCAD CUI? I'll never give up keyboard shortcuts, but there are some times when it would be nice to click without having the MV Palette taking up real-estate.
Error freezed program
While editing a tall cabinet height, a pop up error that cause entire program to freeze. Can't click ok to close it. I inserted the cabinet using default dimensions then went back in to change the Height above floor and the cab height. Didn't happen before
How can I stop autocad dimension from asking each time "dimension text" input and just accept the default?
Instead of just 3 clicks, an additional click is needed to accept the default dimension. How can this be turned off? I've searched google and tried mtexted, dimcmdtext
SPLIT BACK
I can not find the split back options in the foundation library. Was this removed ? It use to reside in the carcass subassembly in the CC library. Now of course the carcass parts are in the local workbook but I see no split back options Nor the split
Training Plan Charges
Hi, I have been a MV user now for three years and have purchased aprox 30 hours of additional remote training over that time at an average of $150 hr at most through MV account manager at the time. Since MV has been acquired by Innergy, the price has
Drawer Face Identification
Was there an update that identifies a left or right drawer face on a 2 door 2 drawer cabinet. I remember something said about it at some point, but have not seen anything in the release notes. We are having issues identifying those faces if something
FEATURE REQUEST - stand alone tablet program for product assembly line
Our shop is transitioning from using moziak to using microvellum. The engineering portion of microvellum is much better. But where moizak shines is with their paperless shop application. Our company was sold on microvellum being able to do everything
Solid Wood Door - Perfect Grain Issue Name Error
I am having an issue with graining with the solid wood door subassembly. This works fine with Slab doors. I am using a NON modified subassembly, this is a template level version. I am on library 26.0327 so the newest one. There is a prompt for Full_Width_Drawer
Is help text correct?
The title for "Shelf Edge Material" is different from the help text, which is asking for Division Material type, which is the right one? Similarly the Shelf edges, has help text asking for material for carcase parts (which are different materials in this
New Microvellum Release Available Now: Build 26.1.0520.641
We are happy to announce that Microvellum build 26.1.0520.641 is now available! This build includes resolutions for issues with room names, the find and replace feature within Workbook Designer, item number scaling, and more. A new option has been added
Perfect Graining - Fails for Vertical Grain
It would be awesome if we could have an option to only perfect grain Drawer Fronts (when using Vertical Grain) I feel like the whole perfect grain feature is only tailored to the US market which tends to use horizontal grain I am trying to nest a job
What drives these faceframe stiles?
I divided this cabinet with the bay calculator giving bay one 12" and bay three 12" with the middle equaling what's left (20") It's a faceframe cabinet. I cannot figure out why it put these two intermediate stiles where it did?? What's controlling that
left/right drawer fronts still not labeled
so i saw that on build 25.0319 they added left/right part names to drawer parts on a side by side draw config. but we are on 25.1121 but are drawer fronts still aren't labeled left and right. is there a prompt i'm missing?
Hardware Material Wizard should be it's own spec group toolbar icon
I don't think I've ever wanted to create stuff for the CutParts Wizard or Edgeband Wizard. Since those two are shipped as "blank" wizards (I assume place-holders for future dev.) can we just have the Hardware Material Wizard be it's own icon/button? The
Add a "Date Created" to Work Order Management window
I recently watched a lunch-an-learn about using the Database management tools and one of the things they covered was Work Order Management. While watching it hit me that it would be great for this window to have a column that could be sorted by "Date
We've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Rough Cut Offset on Border Cuts without hardcoding depths for each material thickness?
Hi all, We're running a double-pass border cut setup on our CNC where the first pass leaves a 1mm onionskin, and the second pass cuts through the onionskin and completes the full depth cut. Both passes are controlled through the processing station. We're
Best way to add a fixed shelf?
From searching around it look like MV used to have a tab in Product Prompt called "Internal Options". But I'm not seeing this tab. Is the best way to just "Add Part"?
Toe Kick Notch Relief
Right now, the Toe Kick Notch Relief Left and Toe Kick Notch Relief Right do not look to see if you are adding a FE. If you are adding a FE, you would not want this extra cut. Please update the formula to look at the FEs.
Mircovellum commands in AutoCAD Drop Downs
This is something I figured out that I'm not sure others know about, but you can add MV commands to your drop-down menu in AutoCAD through the CUI Are there any other cool CAD workflow tricks you may have found?
Cabinet Cutout Subassembly
How on earth does this work. To my knowledge there needs to be a machine token or a hardware item to do the cutout, however, there is no such thing?! Just a cutout icon that i cant see. Am I going insane and missing something obvious here?!
Hinge Location - Door and Drawer Front Report
Hinge location currently shows up on the "Door and Drawer Front Fabrication Report". This is sometimes confusing for our shop, since it appears multiple times on single parts. I would like to have it show up on the Door and Drawer Front Report. However,
Feature Request: Allow different panel size for FACE5 and Face 6 programs in CutParts worksheet
Often the part program sizes between FACE5 and FACE6 are different. For example a FACE5 program might do part formatting on the raw board size (i.e. 1004x604x25mm), then the FACE6 program size (i.e. 1000x600x25mm) needs to be smaller than the FACE5 program.
Factory Workbook Changes Overwritten
Anyone know why this would happen occasionally? Today I made a change to the factory workbook file to add a drawer slide. The change seemed to be good to go, but a few hours later I noticed the drawer slide had vanished. In the factory database, all the
Integrated Post Processor Biesse rover A FT
Hi all, Is there any link that I can learn how to set up Processing Station for Biesse rover A FT or Biesse .CIX file in general? or Any source of document or imported file that I can understanding Much appreciate
FEATURE REQUEST - Unique Wizard Buttons
Can we have 3 specific buttons for each of the wizards? With the Foundation Library we need to go into these wizards more than ever and frankly, trying to click on the drop-down arrow to select what I want can be frustrating.
MV Settings to New Computer
I'm setting up a second computer for training using our floating license. I would like to know the best workflow for duplicating my settings onto the new computer. i.e. materials, wizard setting, cabinets setting etc. It doesn't need to have access to
Assign Render Materials Interface - Custom Colours
With the new Assign Render Materials Interface, how can we add custom colours to the list?
Add Dado to stile shared between 2 cabinets
When doing long wall of face framed cabinets sometime I have to build it in few sections. Design, however, does not allow double stiles. when stained, reduced stile width in not acceptable either. I think it would be nice to be able to have dado groove
New Microvellum Build for AC - Can not save calculators
Can anybody please help with this. I have done a fresh install of Microvellum AC Companion and none of the calculators will save. (Drawer Front, Divisions, Shelves etc.) Please see attached screen shot showing no save button. I have installed on a new
View Angles for SW, SE, NW, NE
Can someone tell me what the view angles are to recreate the same iso views MV has for SW, SE, NW, and NE? I need to replicate these views on a system that does not have Toolbox AC installed. Currently, I have the following: (defun c:SW () (_vpr 225 30))
Next Page