Scribe fillers on sloped ADA cabinets
The recent changes to the ADA cabinet are a definite improvement, thanks! Something that it could still use is an option for left and/or right scribe fillers at wall conditions. See attached screenshot. Thanks! Tom
Library 25.0418
Is anyone experiencing issues with base or tall cabinets with finished ends using the latest Library release (25.0418)? When I place a base cabinet with a finished end that side does not show on the model and when you open part properties the height of
Regarding Reports
Hi there, wondering if anyone knows how to simply select a directory location before running a report? For instance, I would like to be able to choose for the save location to be a specific folder so that I don't have to go in and move them everytime
Exploded Dynamic Image Token
Is it possible to edit the Dynamic Image Token to automatically remove certain parts that we don't need to see in our exploded image?
Sinks & Faucets
Build 25.1.421.641 Foundation 25..0418 We sell sinks and faucet with pretty much every job and it would be nice if we could get them listed in our master hardware report for ordering. It's easy enough to modify the sink subassembly to include the selected
Combine Double Pass and Tab
It sure would be nice to be able to use these strategies combined so intricate parts don't have to be recut. First pass @ .1"Z Second pass through but parts below a certain size (small part threshold) still get tabs.
associative hardware machining
where do i go to adjust the boring machining for the Keku clips used on ADA vanities?
Different Rooms
Good morning, I have a situation here. I created a Project. On this project I started with one room and using the "Face Frame Paint Grade" spec group with 1-1/8" Thick drawer front (everything looks good on this room). I create a second room on the same
Microvellum antivirus exclusions
I'm an MSP and we use an AV which slows down the use of microvellum because its scanning all the files that get edited and created. Does anybody have a list of the folders that Microvellum uses consistently to add to an exclusion list to fix this?
Radio Button Group Label Text
I'm trying to add a label to some radio button prompts, but I can't seem to figure it out or find any documentation explaining how to do it. Anyone have any insight in how to to do this? You can see in some of the screenshots here, there's some label
How to hide a part in 3D but keep its machining ( Ghost Part)
Hi there, Is there a setting where i can hide a part in 3d but keep its machining. See below example-- yellow parts are created for dado purpose only and how can i hide them in 3d? Thank you
How do I make the room name appear in my title block?
I want to have the room name appear in my title block. Also how do I make the date show the day that I publish the sheet?
Work Order Label Barcodes
When sending out work orders, every part is getting a barcode but I only need them on parts that are getting doweled.
Wood Drawer Dividers
I frequently make toolboxes for a company using plywood. They typically have wood drawers the length of the truckbox that slide out when the tailgate is open. I always add dividers to these drawers but have recently switched over to Microvellum and am
Associative Machining Mirrored
I'm setting up a coat hook for some lockers we are going to run, and the machining works properly on the back and right gable but is somehow flipped when applied to the left gable. Not sure what is going on, anyone else have this problem before and what
3D Solids Disappearing
We have an issue with Microvellum OEM 2019 with 3D solids disappearing from the drawing. It seems to happen randomly. For example, we would save a drawing at the end of the day and everything is good. But the next morning, when we open the same drawing, all the 3D solids have disappeared. There is no error message. Both AutoCAD and Microvellum created 3D solids would be gone. The Microvellum 2D products are not affected. Fortunately, the Microvellum products Item Numbers are still there and we could
Draw Part in 2D Not Working
Anyone have issues with Draw Part in 2D not opening/loading part? Any ideas?
2D Instruction Challenge
I am attempting to add Text Tokens to both Elevation and Section, as well as adding "DRAWRECTANGLE" to Elevation, showing the outline for the "Rollouts". I have taken a Master Vertical Designer 1 Bay, used "Inner Drawers" and changed the drawer type to
Router Bit Profiles Do Not Draw
Hello, We would like to use a radius point bit to create a bead board but are having issues actually drawing the radius. Instead, it appears as a square cut. The router bit drawing is a closed polyline located at the 0,0,0 coordinates at the center tip
Inswing Pantry Door
What would be my simplest option to add blum inswing pantry door hinges? library 50.7
Legrabox Bottom Hole Drilling
Can the attached drilling please be added to the library. I have to keep adding it everytime my library updates and I'm not wanting to create a custom legrabox sub.
Parts Immune To Associative Machining
This might be more of a thought exercise than useful, but is there a way to make a part or material type immune to associative machining? The example I'm thinking of is loose laminate parts that are being post-lam'd after assembly. The only reason they
Project Material Sync Type
what does this do exactly? I've always thought of projects as a snapshot of the template at the time of project creation. what materials are being sync'd? So i create a project and someone else changes the template materials and my project is change
Dropped Routing When Copying Machining
I am having an issue when trying to copy machining from one part to another. I am using the 2D part editor, copying all the machining using AutoCad copy, then pasting it into another part in 2D part editor. This works fine for all the drilled holes but
Foundation Face Frame
Just starting to design in the F.F. Has anyone been successful in creating this? This is what the client really wants
Lock Dadoes Face 6 by default
When you do factory standard lock dado it defaults the offset/tongue cutting portion to be done from face 6. We're starting a new work flow where all stain grade and paint grade cabs are going to our custom shop flat, so they can be eb'd, painted flat,
New Foundation Library Release Available Today: Build 25.0418
We are happy to announce that a new update for the Foundation Library, Build 25.0418 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,
New Toolbox Release Available Today: Build 25.1.0421.641
We are happy to announce that Toolbox build 25.1.0421.641 is now available! This build includes resolutions for issues with drill machining coordinates, as well as time delays when processing certain parts via server. Please refer to the complete Release
Drawer box location doesn't account for undermount slides? Foundation library
I cannot find a setting that will give me an acceptable relative location for the bottom of a drawer box when using undermount slides. Currently all drawers except bottom drawers sit flush to the bottom of the drawer front. (see image)
Double Lock Dado
Hi, has anyone ever managed to configure a double lock dado? I can get the 2 female parts milled, but both male parts are cutoff.
Editing Project Level Materials/CutParts File
Just curious, does anyone know why Microvellum doesn't allow us to add or edit materials at the project level? Or is there something I'm missing? When you open the project level CutPart file editor, the options to add or edit sheet stock or hardware is
Partial Inset Doors
Is there a product that already has partial inset doors?
Feature Screen
Has anyone produced a similar Feature Screen. Curious to know the assembly method used?
Reports - Dictionary - Data Set
I could use some help understanding why some ProductReportPrompts do not show up in the columns. For example, I'm looking for Thickness_Toe_kick but it not in the list. I tried to manually add it but the value doesn't pull though.
Copying Rooms & Walls Issue
Anyone else have any issues with walls when copying a room? It seems like when we copy a room, it's not always copying the wall objects correctly. We noticed that walls were sometimes redrawing with the copied products from the copied room and vice-versa.
Experienced Microvellum Users in Colorado
Hello, all. We are having a difficult time finding applicants for a Millwork Engineering/Drafting position who have Microvellum experience. This is an onsite position here in Colorado Springs, CO. If anyone has any interest or knows of anyone who might
24" Blum Undermount Slides
Hello, I need to make a cabinet with 24" drawer boxes, but I don't have the option to use 24" Slides. What do I need to do to get 24" Blum Undermount Slides? Thank you.
The New Look
YOU GOTTA LOVE IT You go Tim
Material Collection (COL_*)
Does the collection feature work for hardware parts as well as sheet goods? I can't seem to get it work for hardware's
Inside Open Material Thickness
Hello, Can somebody please tell me why when I change the material thickness on open cabinets, I lose all the machining? and what do I need to do to keep the machining. Thank you.
Next Page