Mouse Ear Routing Issue
Hello Good day. this is a single page MDF shaker door front (see attached image) , but it seems we have an issue with the lead in and lead out. what is the best solution to solve this. Thank you
Checking Your Work
Hello! This year our shop is refocusing on reducing errors. We don't have a ton, but we are far from perfect. What strategies do you use to ensure that your work is correct before being released? Thanks, Jason
Bathroom Partition Expansion - Questions
Hardware: What hardware manufacturers are included in this expansion for the American market? We primarily use Jacknob hardware. Link: Toilet Partition Hardware & Parts - Jacknob, #1 Online Store! Shipping / Packing List Reports How does the Shipping
Where is Post Laminate Product Prompt?
We use Dado and Screw construction for most all our cabinets. This requires us to post laminate our cabinets when needing a finished end, along with some finished bottoms, tops and backs. I am unable to find the prompt that controls this setting in the
Turn off outline border of product
I have drawn a custom fireplace mantel and I want to turn off the outline border for elevation drawings. I have deleted the drawing tokens for all parts that will not show on the 2d elevation but I cannot find where I can turn off the border. Please see
Dimension Drawing Tokens
Can someone explain the last two options in this parameter: Does the last option allow you to automatically move text see below: We manually do this currently for smaller dimensions but would love to be able to auto move the text height when it gets smaller
Updating the project database to the newest settings of the library
I have an older project that was created prior to some major changes to our library, products, spec groups, and material files. Is there a way to overwrite the old project files and bring the new settings into the old project? The older project doesn't
Feature Request - Prompt organization options
Hello all, One thing I've noticed since I've started working in Microvellum is that prompts are fairly limited in UI organization options. While I appreciate that there's colors, tabs, and different types of control types that allow for some organization,
Draw dynamic image - exploded parts list to correct size
Hi. Currently and as the MV team has confirmed to me, these part list dimensions show the panel size less edgeband thickness with absolutely no way to alter this behaviour, irrespective to how the processing stations are set up. We rely heavily on the
Thick Back Dado/Rabbet Machining Issue
Does anyone have any idea of how to correct the machining on this rabbet cut for a thick back, without adding a new separate machine token? Currently, using the tools we want to use, the rabbet isn't getting fully cut around the edge of the thick back.
Q&A Drop-in Session - January 4, 2024 - Recording Now Available!
Did you miss our live Q&A drop-in session this morning? Not to worry, we recorded it for you. The recording from our 7 AM session is now available: Q&A Drop-In Session | Microvellum Software Our free LIVE events provide a great opportunity to learn, connect,
Part label printed out doesn't match cut part.
Hi everyone, I have a problem that when I processed from MV 2023, the part label matches with the part from MV, but at a saw station, the part label doesnt match with the cut part. Part stickers were randomly, some do match but some dont in a same Work
PLINEs with multiple offsets in Parameter 5 lose their pocketing ability
If you offset a PLINE only once (without curly brackets around it), the option for making it a pocket will hold. However, if you offset it multiple times (which requires curly brackets around each instance), the PLINE loses the pocket option you tried
Arc and Radius problem
Hi everyone, I'm trying to do some arcs and radius to create a trim in a table and run them on a CNC. Those trims have different arcs and when I started copying the lines to create the angle, it looks like the arc ends are separated about 3/16" from the
Toolbox 2023 Now Available!
We are happy to announce that the update to Toolbox 2023 is now available. To discover the new features and abilities of Toolbox 2023 check out What's New in Toolbox 2023 (OEM). For help installing Toolbox 2023 please visit the Installing Toolbox and
New Toolbox Release Available Today: Build 24.1.0104.641
We are happy to announce that Toolbox build 24.1.0104.641 is now available! This build includes resolutions for issues with material files, border routing depth, the product report prompt, and various issues with machine tokens. The ability to obtain
Dado Tool Adjustment
Hi, I was looking over the DADO Token for Routing and had a question about tool assignments. We typically use 1/2 Tops, Bottoms, Backs to Dado into Sides, Backs, etc. and production is wanting to use a 1/2 thick tool to do the dado cuts. When the material
How to track what exactly has been engineered inside of cells
To keep track of which cells have been edited, we change the fill color of the cell in Workbook Designer (each engineer has a specific color). That way, others know that cell has been engineered and who did it. When possible, we also copy the old formula
Multiple Nesting CNC's
Our shop wants us to produce code for 3 different nesting CNC's so they can dynamically choose where to run individual jobs as deadlines change / cnc's go down etc. I started out checking boxes for 1 cnc processing, unchecking that cnc, checking the next
Formulating Drawer Sub-Front drop based on stock heights and lock locations?
I have been asked if it’s possible to formulate the Drawer Sub-Front drop based on stock drawer heights we use and stock as well as adjustments to make sure we clear the locks and drawer pulls. Mostly we are using stock sizes. (3, 4, 6, 8, 10) The others
Moving product from Component to Foundation
Happy New Year everyone! We are just starting to work in Foundation Library and have several products in Component that we want to copy over. I've exported the product successfully from one library to the other but when I go to save the product in Foundation
AutoCAD Quick Calc
Does anyone know the steps to maintain the Units Conversion when you close out and open up again. It always reverts back to Meters?. I cant find the answer when I google it.
Thin Dividers in Foundation Library ?
I have been testing and trying to setup the current Foundation Library and I have run into something I can't currently find. I am unable to find the prompts or Sub-Assembly to use thin vertical or horizontal dividers. We often do mailbox cubbies but use
MV engineer with 5 years of experience
Microvellum engineer and drafter with 5 years of experience looking for a job near Greenville, SC or Remote. Resume attached. Microvellum, AutoCAD, Adobe Creative Suite, Microsoft Office Suite, OneDrive, Google Drive, Microsoft SQL Server, Seradex ERP,
What does Door to Cabinet gap global actually do?
Hi MV family, I'm trying to change this gap using this global but it's not changing the hinge plate placement from the front edge of the cabinet. 37mm from front edge to the center of the bored hole for hinge plate. I've increased it from 1/8" to 3/16".
Add Feature To Automatically Purge Prompts From Work Order Database When Work Order Is Deleted
We recently had an issue where importing a work order would take over four hours. After extensive troubleshooting by Steve Carter from MV it was found that the prompts table in the unified work order database had well over one million records. These records
Auto Assign To Processing Station If Specific Tool is Used In Machine Tokens
Hello, we have setup a processing station for mitered parts where it spaces the parts further apart so the V-Groove bit does not hit adjacent parts. We want to autoassign parts to the processing station if tool number 904 is present in a parts machine
Cloud Based SQL Server
With COVID changing how our industry has been working from home this year I wanted to reach out and see if anyone has tried implementing Azure SQL Managed Instance for Microvellum. Eric McGillis – Regional Account Manager Microvellum Software | Streamline the Way You Work Direct: +1 (715) 781.0406 Oregon Office: +1 (541) 664.1625 Toll Free: +1 (800) 204.0913 Web: www.microvellum.com ……………………………………………………………………………………………………………………………………………………. This e-mail message
Main drawing file will open in Trueview 2020 but will not open in Autocad.
This is the second time this has happened, but the old fix is not working. We have a job that has a lot of hours in it that has now locked up. Last time I renamed the back up file and made it the dwg file, but this time that is not working. I have also
Wood grain Visualising
Hi guys, I've designed a big counter in Toolbox and somehow have gotten de wood grain direction wrong on more than a few parts. I previously used a different cabinet software to design my cabinets, where it always should the grain direction if the option
ability re-draw all product before close the file
Hi, i would like MV have this option to re-draw all products before close the file. Our user sometimes forgot to click the re-draw button and other user open it, can not tell which one is re-fresh, which one is not re-fresh. It is a little bit confusion
Ghost images
When I make changes to a part, width or lenght or Origin, after I save it it stills shows an image of the part before making the change. I found it is not a real part but I end up deleting it thru AutoCad Commands!
How to plot in black and white?
Currently all plots are in color, we would like to have them black and white. I have played around with the plot style editor with no luck. Thanks
Upper cabinet with overlay bottom and finished end not constructed properly
I need an upper cabinet with a bottom valance, an overlaid bottom and a finished end on one side, but the construction that results with the overlay bottom and finished end options checked results in a finished end that is not long enough (doesn't follow
How do you center pull on doors
Hello, Customer wants pulls on cabinet doors to be horizontal and centered on door width. Where is the setting to have all the pulls centered on doors? I am lazy and do not want to do it manually for each door. Thanks.
Monthly Product Engineering Update Review Sessions Coming In 2024
Exciting news! Beginning January 2024, we'll be hosting monthly Product Engineering Update Review sessions! These online events will offer insights into the changes introduced in every product library update. Gain an up-close view of the enhancements,
upgrading from SQL express
Hi there, we are using MV Toolkit and running out of space on our express database, looking to upgrade to SQL standard. Had a pretty unhelpful chat with support trying to determine if we need to purchase seperate SQL user licences for each Microvellum
Drawing tokens in toolbox 23.1010
Hello I'm newish to Microvellum, and not really any AutoCAD experience. I've been using Microvellum for about a year and never had to adjust my 2d drawings much. It was already set up from the previous user, and we was using toolbox imperial on 2022 version.
Assign Specific Material to a Processing Station
Hello- We have multiple CNC's that we prefer to use only with specific materials. Is there a way to auto assign materials to different processing stations? Thanks.
Assigning Default Machining Sequence Based On Tool
I am trying to figure out if there is a way to rout machining in a specific sequence based on the tool used. I have a T-slot type cutter that I want to machine after a relief is routed with a straight bit. The relationship of the routs to each other wont
Next Page