Foundation library hardware integration
Within the foundation library, I would like to know if two hardware elements are integrated into it: star hangers and monarch z-clips?
How to align cabinet doors for sequence on grain material
I'm looking to see how would I go about making sure if I have a Tall Upper that sits on a base cabinet, that the doors would be placed on the CNC program correctly? To keep grain consistency between the 2 doors
Perfect Corners on MDF Doors
Hi everyone, I am working on producing MDF doors, but my corners are slightly rounded, and I'm looking to get a sharp corner. I am currently using a 45 degree and 60 degree bit. I route the square profile out first, then I add a route line from the inside
2D Blank Section Drawing
Am having issues trying to draw a section from elevation drawing- instead of showing the internals of the cupboard, they are coming up like it's looking at the end of the cabinet? Any help here would be GREATLY appreciated.
Access Panel option to radius just one side
I have been messing with the Access panel sub assembly for a while. Broken it and fixed it again, with help. One option I would like to see is the ability to have an access panel with the side against the back or side flat and the other side radiused
Grain direction alternating on the same sheet
It did the same thing on my doors and drawer fronts. I am fixing it manually, but would like to NOT HAVE TO DO THAT. Anyone know why it is doing this, and how to prevent it?
Product development update query
On the 29th of may we had the engineering meeting for the month and we got onto the topic of walls. I followed Lennys advice to copy the walls into the foundation library section as its own product, my thinking is eventually id like to have it setup so
pop-up window they are either not showing every button, or the screen is cut off
Can someone please help, whenever I go and open either product prompts or any other pop-up window they are either not showing every button, or the screen is cut off. Is there a way to fix this? I've attached pictures of some of the screens Thanks Tr
Export/Import Contacts
Hi, Is there a way to export/import 'General Contacts' from one library to another?
Workflow with other team members
What are other peoples workflows with other team members? we are only a team of 3, but it seems two of the 'designers' want to slap units down make them look good enough for a sale, then i'm left to clear up any mistakes, exchange cabinets for better
Perfect Grain - 5pc doors?
How do I get perfect graining on a cabinet with 5pc doors? I have the Global "Perfect Grain" checked but the nesting isn't so perfect. Component Library Thanks in advance. Jason
CANNOT PROCESS COMPOSITE.DWG
Any one have any reason why this happens. Please see below.
small parts and dados
Hello, Can I tell microvellum to cut dados, small parts, cutouts, routes, etc. first? and then cut big parts. thank you.
Adj Legs
Foundation Build 25.1.106.641 G,day Microvellum. When using applied left/right panels that go to the floor the adj legs move away from the edge the panel is applied to. I would like to stop this on panels to the floor but keep it for panel that require
Extruded Wall Dadoes
The dado cut on angled walls is not staying square. It is nesting as an angle on the ends of the dado rebates which is to small for my router to follow and is throwing up an error on my cnc and it stops the sheet from cutting. I have nested a big job
Possible lisp routine for hatches?
Has anybody created a way to automatically rotate a hatch based on a rectangle's dimensions? Like for instance the plywood hatch like this: I would like to have it automatically rotate to the longer side of the rectangle. Problem is probably how it would
How To Adjust Hatch Scale for Custom Material
So im going through the material editor and called out for 'AR-CONC' for a 2cm stone material. When it creates my section the hatch is at 1.0 Scale. I went into 'Hatch' and settings to adjust it to .25 but it doesnt adjust the material selection scale.
Pitfalls of drawing in ARCH D vs 11x17?
Shop uses 11x17 on occasion. However they also have computer screens to zoom in on things with pdf. My question is, if I use the larger paperspace and follow the AWI section scaling and everything, will it still print readable on 11x17 if the shop needs
Part Labels: Boring and banding shown on wrong edge
Occasionally (maybe 50% of the time?) we end up with banding call outs and edge boring labeled on the wrong edge. It seems to only manifest on "Drawer Divisions" but not reliably wrong. No clue how to track down what's causing this. The info shows correctly
Library Designer - Show list of Parts/Products/Subs that don't use item
When I am working in Library Designer, it would be nice to see the inverse of the things that don't use the item I'm looking at. For example: I have a prompt "Full_Top" in a lot of products that are all the same formula There are a few custom products
New Install- Drawing Token Problems
I recently installed Toolbox2025 on a new PC, and whilst I was able to migrate most of the setting from the old PC to the new one; there seems to be some kind of problem going on with creating 2D drawings. The product labels are being drawn as super small
sql installation
Hey guys i am a remote drafter and got my own license. my question is i want to have one pc as a server and my laptop that i take around the place and then use my pc to do final touches and all so is thier a way i can set up my laptop to have remote access
TEXT ON PANEL
Hey all how do you engrave text on to panels for cnc what is everyone's solution
Internal drawer with faces material indicator
Hi, Does any one else use many internal drawers with faces & is having to manually go into the subassembly to change to internal drawer faces to white melamine, same as the carcass? We do many wardrobes that have internal drawers with faces, and we find
Through Drilling Melamine on Panel CNC
I am attempting to through drill some melamine closet panels on a panel processing CNC. Wondering what suggestions people have to prevent chip out on the bottom side. One person I spoke with suggested I slow my exit speed on the drill to prevent chip
2d Grain Indicator
We would like to be able to use our own block for the 2d-Grain indicator if possible. We also want this to come in the same size on all finished faces instead of scaling on larger/smaller ones. Finally, we want to move the location of the direction to
Digilocks Hardware
For a while now jobs have called for Digilocks or similar brands. any thoughts on adding to hardware library. Especially for blended lockers in office furniture. Just putting it out there see if there's a demand for it.
If Statement based on type of drawer front
Id like to change the global variable to a if statement so the drawer handle changes position based on what style the drawer front is. the global is G!Drawer_Handle_distance_from_top, essentially id like it so if the drawer front turns into a 5 piece
New Toolbox Release Available Today: Build 25.1.0519.641
We are happy to announce that Toolbox build 25.1.0519.641 is now available! This build includes resolutions for issues with modifying work orders, 2D plan tokens, an error that sometimes occurred on startup, and more. Please refer to the complete Release
Work order summary by batch
I would like a report that shows only the products, hardware, sheets etc... used in a single batch of a work order. How can this be accomplished?
Double side panels
When I draw a "Tall Fridge Cabinet", somehow it always draws a double side panel. Every time I need to manually "Erase the part".Is it a software bug or a settings problem?
Multiple Sheets
Good Morning Microvellum. I have nested a job and some sheets have the same layout so it is telling me to cut sheet B2300 2 times. I don't want this. Regardless of the layouts being the same i would like to cut each sheet separately. I just cant find
INNERGY IIBT
Hi MV Community! Most companies don’t know how they’re really doing. That’s why INNERGY has launched the IIBT (Industry Benchmarking Tool) in partnership with third-party firm Inverra—so you can compare your financials to others in the industry. If you've
Procedure: How to Add Edge/Tab Pull to Component Library 50.7 Metric
Attached is a document that will show how to add a Tab/Edge Pull to Component Library 50.7. Values are in Metric. I also included the Tab/Edge Pull drawing files that I used. DISCLAIMER: This is my own take on the procedure and have tested on various
Blended lockers ,office furniture
Anybody work with this yet ,I don't see many options as far as adjusting door sizes or swing. We do a lot of these type lockers. Most always swing same direction and different door measurements. this does get me closer than previously but was hoping for
Moving Prompts/Rows
I noticed our data is getting a bit spread-out in our spreadsheets and I am just wanting to move my rows around so I can start grouping my machining/hardware etc prompts next to each other to organize better. EDIT: Forgot to ask, just how can do that
after update to latest build, the material catalog, lost the "face 6 flipping option".How can i bring it back?
Any one has the same issue as me? I just update to the latest build and test out.
MV Product Inside of Block Editor
Hello All, Just throwing this out to any who may take interest... For reasons not terribly important to the topic... "Because I wanted to." 😄 I drew an MV Product inside of Block Editor... It drew fine... I was able to access the interfaces once drawn..
Wine Rack appears to be slightly out of alignment
As per the title i think the wine rack is out in a couple of the formulas, short divisions all round.
Copy product from one wall to another
It would be great if we could right click and copy a product via 'Product Viewer'. Currently if you MVCopy a product that is associated to a wall, it keeps that association and you don't get the option to 'Place Product on Wall', or 'Place Product Next
Next Page