Internal Drawers - Wood boxes - Sub front
Hi, I feel kind of stupid for asking but anyways: We recently switched to doing all drawers as Wood Boxes with Blum Movento runners. All works great, except for internal drawers. The sub front is never finished, no matter what setting I use. Currently
Adding a Pull
I am attempting to add a new pull into my Microvellum hardware. I am following the Knowledge Base methods and everything was going good until I opened the Workbook Designer, went to the Global page and the Lookup Table tab. There is no Pull list in my
Importing V67 Jobs
We have nine years of V67 job that I would like to import in to our current FactoryDataBase. Is that possible? I don't see any tool in the data base utilities UI to do this, only V67 Library, not jobs... Has anyone work out if this is possible?
project vs template materials
I have been using the local version of MV for a long time. We have spec groups set up for most scenarios. Process when starting a projects. make a copy of the desired spec group along material file and edge banding files rename to spec group / material
Drawer in a Drawer
Anyone have words of advice or guidance of doing a 'drawer in a drawer' Like this: And yes buying it from Rev-A-Shelf would be the best ... but that's too easy! The size / proportions it doesn't exist. Any input would be appreciated
double rendering
Hello Microvellumers! Does anyone experience this issue? When re-drawing a product (usually when changing a prompt dimension) the new product drawing appears and the old remains in the screen as seen in the image below. It doesn't happen every time time,
Force attach materials to a appliance
How do i go about forcing the materials i have attached to the base drawing for a appliance, in this case an aga, that is not built into MV by default but is now in the system by me. However no matter what i try i cant get the materials stick to the layers
Grain matching and grain direction issues..
We have a large job where we need to grain match across several cabinets, including horizontal grain on all doors and FEs. It does not seem to be working properly and I don't know where I am going wrong. Any insight will be helpful or should I create
Drawer Front Calculator
I would like to turn it off, so the Designers can not access it. Where is it located and has anyone have it turned off?
copy from one wall to the another
So I've been using Microvellum since 2007. I got away using MV walls but now we are going back to it. So this is a MV 101 question. How do i copy a product from one wall to the next. Whenever i use the MV copy command i get extra elevation drawn everywhere.
Your Upgraded Microvellum Portal is Now Live!
We’re excited to announce that your upgraded Microvellum Portal is now live and ready for use! This upgrade delivers a streamlined experience, making it easier to manage company and contact information, access and manage software licenses, and download
Ramped Routing CAD representation
I am adding a ramped routing for pocket screw pockets and am trying to figure out if there is a way to get a 3D AutoCad representation of the sloped rout. I am using a PLINE machine token with a starting Z value of 0 and an ending Z value of 7/16", this
Can we link Wall Cabinet Dimensions to the actual wall height cabinets are Associated too?
I have been asked if we could put wall cabinet face-frame dimension on our elevation; but they want them to always be based off the top of the wall. I know I could reference the global wall height but that doesn't mean that it will always be the same
Unmachinable Toggle-Bolt Cutouts after update 2D Machining
We cut our countertops to have dog-bone shaped cutouts on the underside to draw them together at seams using toggle bolts. The machining works fine from simply processing the products through a work order and running it at our CNC. However, if we find
Adding a drawer slide in Imperial Component Cabinet Library
There used to be documentation on the knowledge base tab of this page showing how to add drawer slide hardware for the imperial component library, now it's only showing for the foundation library and I can't find the one for imperial component. was it
CutParts File & Formula Materials
I've been trying to make some updates to our formula generated materials and just made a pretty big mistake due to not understanding how the CutParts file worked. In the library template, I made a copy of the CutParts file and started to edit the formula
Tall cabinet finish end/scribe side 1" short
I have a problem every time I add a finish end or a scribe to a tall cabinet. That side always 1" short from the correct height. How do I correct this? Thank you.
Product Prompt Options Columns
Would it be possible to have in product prompts for the materials prompts be split into separate columns? Example being the first column is the material prompts then the next column to be all the edging prompts? I have a few custom products that require
Route 3 Perfect Corner (COL22)
Hi everyone I'm having an issue with Route 3 - Internal Profile not generating correctly. I'm getting the error "Error Creating Offset Geometry" when trying to use the formula in the machining token. The highlighted green area in the formula is linked
Component Library vs Foundation Library
Question when upgrading to stay with CCL or go to the Foundation Library. We are still working with Toolbox 2020 v50.3 but are looking to upgrade to latest version to get up to date. We have very few custom products normally work straight out of the provided
Warning Message not appearing
I've implemented warning messages into products to remind users of material limitations. My problem is that these messages are not appearing in the product prompts while being active in the design data interface. Does anyone know why that would happ
INSTANCE OF AN OBJECT
CAN SOMEONE TELL ME WHAT THIS MEANS? SMA PARTS, THE Y SHOW UP BUT I GET THIS...
Autocad Wheel
G,day Microvellum Seems I need to turn my autocad wheel in the top right hand crn of drawings to ucs world to see which edges have edge banding or machining applied. Ok no worries. It seems that when ever I copy a job, rename it and the room this wheel
CURVED PARTS
has anyone made curved parts like below and got the error when processing that they didn't fit on any sheet in that material when you know it will fit? i had the true shape nesting for a month and it still wouldn't nest parts like this correctly unless
Hinge offset form edge doesn't adjust with gaps on doors
So I have the newest Toolbox and library and now whenever I set a reveal to the edge of the door the hinge hole moves with it to always be at 22.5mm to center of hole from edge of door. This is not the way it is supposed to work since the 22.5mm should
Calculators
Hello, I want to add a few more calculators to my product but I don't want them all to show all the time. Like I always want my bay calculator to always show but the calculator for my drawer heights (which I am putting on my main screen in place of the
why in the WORLD are the ADA sink settings so screwed up?
Does anyone else see badly flawed logic in the way the ADA angled sink cabinet is set up? This formula right here for the top facia height does not yield ADA compliant settings: =IF(Height-i2u(27)>G!Default_Top_Drawer_Front_Height,G!Default_Top_Drawer_Front_Height,Height-i2u(27))+IF(Enclosed_bottom=1,Thickness_Bottom,0)
Lift Up Pocket Door
Have a request for a Lift Up Pocket, any of you residential shops doing this?, if so what hardware do you recommend. I see this Richelieu, but it does not allow to hide the system, the track plate is in the way. https://thebuilderssupply.com/richeli
Setting counter depth for project?
I have tried adjusting it in the globals but the change does not affect new products drawn. Is this the correct area to change the counter depth for the project?
New Toolbox Release Available Today: Build 25.1.0505.641
We are happy to announce that Toolbox build 25.1.0505.641 is now available! This build includes resolutions for issues with Project Factory Workbook permissions, Product Prompt fields, as well as issues with perfect graining and part placement during
Divisions
Hello, Does anybody know what is this "T" shape on the nest? It's part of the division and because it's on face 5 makes everything else back side operation. Thank you.
Efficient Workflow for High-Volume Shop Drawings: Mixed CAD & Microvellum Approach?
Background: For a medium to large casework project, we usually have 30-80 shop drawing layouts. We have 4-7 days to make changes to the entire set each revisions. Revising a few width or replace cabinet is simple. But many cases we have to add new layout
Nesting optimizer
Hello everyone I am using the new Beta optimizer, it works far better but I still have the issue of it placing all the rails/small parts on the last sheets, is it possible to have an option for a maximum number of parts per sheet? thus forcing it to place
Single Door Pocket
Where is the control to remove one of the divisions? What's with the extra hinges and additional narrow vertical divider??
Hardware Door Stays - No Door to Cabinet Gap allowance in formula.
The hardware needs to move forward to touch back of door - G!Door_to_Cabinet_Gap. Been caught out a few times with the Hafele Free space....they don't have enough adjustment to push the door out.
Item Number value preselected instead of Width value when adding or editing cabinets
Updated from an older build to the current build (ie. from 23.1.1120.641 to 24.1.1001.641) and whenever a new cabinet is added or Product Prompts is used, the preselected value is now always the Item Number as opposed to how it has always operated previously,
Newest features in Extruded Product Builder
What does this mean? What's the real impact of hitting "yes" vs. "no"
Base Drawer Sink w/False Front in 25_0319
Has anyone been successful in working the prompts to accomplish properly adding the tilt out. Can't figure out what to uncheck/check. Three attempts and no luck. It works easier when using a 2DR/1Drw Base.
Display Issue - Annotations Enlarged and Repeated with Infinitely Smaller Copies
Hello, I am in process of learning Microvellum and am getting what looks like a graphics glitch of some sort. When I hover my cursor over a part of a cabinet that has been drawn within the workspace, the annotations associated with that cabinet (dimension,
Hardware list preview
Is there a place to preview the hardware list similar to the "Parts List Preview" prior to processing a project in MV?
Next Page